Scale Calibration Technician

3 weeks ago

Bossier City, United States Hueman PE Talent Solutions Full time
Job DescriptionJob Description

Michelli Weighing & Measurement is hiring a Scale Calibration Technician as a Full-Time job in Bossier City, LA.

As a Scale Calibration Technician you will be in charge of the development of calibration methods and techniques for the performance of calibration services on precision measurement devices.

Since 1947, Michelli has been your scale & measurement equipment distributor and service provider. From scale rental to measurement equipment purchase, our product specialists can help. Our products range from high precision instruments to industrial scales, available from the best manufacturers in the world. With locations in 11 states, local support is available.

Key Responsibilities:

  • WORK SAFELY – Accidents are preventable.
  • Greet customers with a warm and positive attitude.
  • Respect your co-workers.
  • Expect to be on-time and ready for work each day unless you notified your manager or supervisor otherwise.
  • Responsible for reporting directly with your assigned manager or supervisor.
  • Agree to and must successfully pass ongoing Physical Exams, Background Screenings, Drug and Alcohol testing as required.
  • Agree to and must successfully pass ongoing safety training, both general and customer site-specific safety training.
  • Develops and evaluates calibration systems that measure characteristics of objects, substances, or phenomena, such as length, mass, time, temperature, electric current, and derived units of physical or chemical measure.
  • Identifies magnitude of error sources contributing to uncertainty of results to determine reliability of measurement process in quantitative terms.
  • Advises others on methods of resolving measurement problems and exchanges information with other metrology personnel.
  • Working at customer sites, often working independently.
  • Attend technical training sessions.
  • Meet ISO9001 and ISO 17025 Quality Management System objectives and follow processes.
  • Maintain an orderly work area and clean company vehicle.
  • Write neat and accurate service reports.
  • Travel is required via company vehicle. The general travel area is within 100-mile radius of the office with some occasional exceptions.
  • Drive a company-issued vehicle as required for the job and follow any state and local laws while operating the vehicle.
  • Participate in the on-call rotation for service technicians.
  • Accept overtime work, as necessary.
  • Carry a cell phone when on-duty or on-call.
  • Willing to assist other co-workers when available or time permits.

Job Qualifications:

  • Low-voltage electronic instrument troubleshooting and repair.
  • Able to handle tools to perform repair activities.
  • Able to use computers and mobile devices.
  • Working knowledge of Microsoft MS Outlook, MS Word, MS Excel, MS PowerPoint programs and Web browsers.
  • Mechanical aptitude, understanding of mechanical movement concepts.
  • Read and understand electronic schematic diagrams and technical manuals.
  • Possess and maintain a valid State issued Driver’s License.
  • Submit to and pass Pre-Employment Background Screen, Drug and Alcohol.
  • High School Diploma or GED.
  • Electronics Education preferred.
  • Military or Commercial Metrology Training preferred.

Michelli has grown to over 20 locations in their 70 years of business. Our experts can help keep you operating in peak condition. Michelli is IOS 9001 registered, and our calibration lab is ISO 17025 accredited. We show the world what measurement can do.


If you are interested in learning more about a career with Michelle Weighing & Measurement as a Scale Calibration Technician, apply today

  • Automotive ADAS Calibration Technician Apprentice

    7 days ago

    Bossier City, United States Caliber Collision Full time

    Service Center PT-East Texas Job Summary As a Protech Calibration Technician Apprentice you will be provided mentorship and training to learn how to perform a wide range of Advanced Driver Assistance System Calibrations by following OE specifications and repair standards. You will gain confidence as a calibration technician across a wide range of...

  • Field Calibration Technician

    7 days ago

    Columbia City, United States Transcat, Inc. Full time

    Who we are - Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees - in technical, consulting, operational, sales Technician, Calibration, Field, Technical, Business Services, Equipment

  • Electronic Calibration Technician

    3 weeks ago

    Oklahoma City, United States Cross Company Full time

    Job Summary: This highly specialized position requires a candidate with the experience and the ability to calibrate a wide variety of electronic, test, diagnostic and general purpose instruments ranging from Digital Micrometers, signal generators, Pressure / Torque / Vacuum / and Flow. In addition, the technician needs to have the ability to calibrate and...

  • Automotive ADAS Calibration Technician

    7 days ago

    Kansas City, United States Caliber Collision Full time

    Service Center PT-Kansas City, MO JOB SUMMARY Protech Automotive Solutions has an immediate job opening for an ADAS Calibration Technician who will Perform static and dynamic ADAS Calibrations on foreign, domestic and EV (electric) vehicles and troubleshoot complex calibration repairs. Test drive vehicles after repairs and adequately explain ADAS...

  • Automotive ADAS Calibration Technician

    7 days ago

    Oklahoma City, United States Caliber Collision Full time

    Service Center PT-Oklahoma City LOCATIONS: Position areas are Ardmore and Lawton, Ok JOB SUMMARY Protech Automotive Solutions has an immediate job opening for an ADAS Calibration Technician who will Perform static and dynamic ADAS Calibrations on foreign, domestic and EV (electric) vehicles and troubleshoot complex calibration repairs. Test drive...

  • Electronic Calibration Technician

    3 weeks ago

    Oklahoma City, United States Cross Technologies Inc. Full time

    Job DescriptionJob DescriptionJob Summary: This highly specialized position requires a candidate with the experience and the ability to calibrate a wide variety of electronic, test, diagnostic and general purpose instruments ranging from Digital Micrometers, signal generators, Pressure / Torque / Vacuum / and Flow. In addition, the technician needs to have...

  • Electronic Calibration Technician

    4 weeks ago

    Oklahoma City, United States Cross Company Full time

    Job Summary: This highly specialized position requires a candidate with the experience and the ability to calibrate a wide variety of electronic, test, diagnostic and general purpose instruments ranging from Digital Micrometers, signal generators, Pressure / Torque / Vacuum / and Flow. In addition, the technician needs to have the ability to calibrate and...

  • Electronic Calibration Technician

    7 days ago

    Oklahoma City, OK, 73149, Oklahoma County, OK, United States Cross Company Full time

    Job Summary: This highly specialized position requires a candidate with the experience and the ability to calibrate a wide variety of electronic, test, diagnostic and general purpose instruments ranging from Digital Micrometers, signal generators, Pressure / Torque / Vacuum / and Flow. In addition, the technician needs to have the ability to calibrate and...

  • Meter Proving Technician

    3 weeks ago

    Kansas City, United States Liquid Meter Calibration Co., INC. Full time

    Job DescriptionJob DescriptionMeter Proving Technician - Kansas City RegionCompensation: Hourly wage based on experience. THIS JOB IS 100% TRAVEL. The candidate will travel to customer locations throughout the region. Scope: Technical position involving liquid hydrocarbon measurement. Candidate will be responsible for mobile meter proving rig and working...

  • IT Support Technician

    1 week ago

    Webb City, United States Cardinal Scale Manufacturing Co Full time

    Job DescriptionJob DescriptionSummary/Objective The IT Support Technician is responsible for providing technical support to end-users for both hardware and software, including diagnosing and resolving technical problems, within the company's manufacturing plant.Essential FunctionsReasonable accommodations may be made to enable individuals with...

  • E&I Technician

    7 days ago

    Dodge City, United States Hilmar Cheese Company Full time

    Electrical repair and upkeep of all plant electrical equipment, processes and Facilites in the areas of the cheese plants, milk receiving, whey plants, water treatment, and permeate plant. Repair, calibrate, troubleshoot and maintain all plant contro Technician, Manufacturing, Repair, Maintenance, Equipment

  • Technician

    4 weeks ago

    Kansas City, United States Evergy Full time

    Job Duties:     Inspect, analyze, repair, test, clean and calibrate complex electrical and mechanical systems. Install and maintain all types of instruments and controls.    Ability to utilize all types of test equipment to diagnose electronic and mechanical equipment performance.    Assist on performance and acceptance tests on new and existing...

  • Technician

    2 days ago

    Kansas City, Missouri, United States Evergy Full time

    Job Duties: Inspect, analyze, repair, test, clean and calibrate complex electrical and mechanical systems. Install and maintain all types of instruments and controls. Ability to utilize all types of test equipment to diagnose electronic and mechanical equipment performance. Assist on performance and acceptance tests on new and existing equipment. Performs...

  • CEMS Technician

    4 weeks ago

    Oklahoma City, Oklahoma, United States OG&E Full time

    JOB INFORMATION** We are hiring for either a CEMS Tech II (or) a Senior CEMS Tech. Candidates will be considered at the higher of the 2 levels they qualify for. **Job Title: CEMS Technician SeniorJob Code: 127988Grade: Technical 40 (or) Technical 41JOB SUMMARYMaintains, calibrates and troubleshoots power plant emission monitoring systems in support of...

  • Technician

    3 weeks ago

    Kansas City, United States Evergy Full time

    Headquartered in both Kansas City and Topeka, Evergy employs about 4,900 people who are dedicated to empowering a better future.  We are recruiting candidates for a Technician at our LaCygne Generating Station, wage rate $58.13 per hour. Please find below a list of the minimum requirements for the position. It is important the candidates address their...

  • Technician

    4 weeks ago

    Kansas City, Missouri, United States Evergy Full time

    Headquartered in both Kansas City and Topeka, Evergy employs about 4,900 people who are dedicated to empowering a better future. We are recruiting candidates for a Technician at our LaCygne Generating Station, wage rate $58.13 per hour. Please find below a list of the minimum requirements for the position. It is important the candidates address their...

  • medical Technologist/medical Laboratory Technician

    2 weeks ago

    Silver City, United States Gila Regional Medical Center Full time

    General Description: The Medical Technologist/Medical Laboratory Technician is responsible for performing Laboratory specimen testing, analysis and reporting. S/he prepares specimens, calibrates and maintains instruments, and assists in all areas of the Lab, as needed. * Performs high complexity Laboratory testing and analyses on products and specimens. *...

  • Field Metrology Technician

    2 weeks ago

    Salt Lake City, United States Prime Machine Full time

    Job DescriptionJob DescriptionAt Prime Field Service we take pride in precision and professionalism. Our team is dedicated to delivering top-quality metrology services to industries across the board including but not limited to mining and power regeneration. Join us where accuracy and expertise are the name of the game.Job Description:Are you passionate...

  • Medical Device Repair Technician I

    4 weeks ago

    Cooper City, United States Path Engineering Full time

    Job DescriptionJob DescriptionRoleAs a Medical Device Repair Technician I (also known as Medical Equipment Technician, Biomedical Equipment Technician), you will play a crucial role in the healthcare industry by ensuring the proper functioning and maintenance of medical devices. This includes performing routine inspections, diagnostics, and repairs,...

  • Service Technician Apprentice

    3 weeks ago

    Oklahoma City, United States Cross Technologies Inc. Full time

    Job DescriptionJob DescriptionJob Summary: The apprentice will be working with Senior Technicians over time to master the skills needed to perform quality calibrations adhering to corporate quality standards and procedures.Duties and Responsibilities: Over time learning will be learning calibration encompassing the following core disciplines: Temperature,...