1st Shift Machinist

4 weeks ago

Houston, United States Rotating Machinery Svcs Inc Full time
Job DescriptionJob Description

JOB SUMMARY

Rotating Machinery Services, Inc (RMS Inc.) is seeking a qualified Manual Machinist to work 1st shift and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. on rotating equipment components (pumps, turbines, compressors, and more) and assemblies to ensure compliance with specifications and quality requirements.

JOB REQUIREMENTS AND QUALIFICATIONS

  • Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting.
  • Ability and willingness to work around and use large propane / acetylene.
  • Ability to operate small lifts, pallet jacks and other lifting equipment (training will be provided on our specific equipment, but basic skills are required beforehand).
  • Advanced oral and written communication.
  • Ability to perform mechanical disassembly and re-assembly of various compressor components associated with reciprocating compressors such as piston assemblies, cylinders and compressor running gear while using hand tools, torque wrenches and hydraulic equipment.
  • Advanced math skills to calculate tolerances and dimensions.
  • Must be able to read and understand Blueprints and G-Code.
  • Must be familiar with basic machining practices involved in turning, milling, drilling, threading operations.
  • Must be competent reading drawings and following instructions necessary to produce usable and saleable parts.
  • Must be able to hold tolerances as dictated by drawings, written instructions, or industry standards.
  • Must be proficient with the use of, the care of, and the calibration of all types of measuring devices (i.e., micrometers (OD and ID), dial calipers, dial indicators, etc.).
  • Must possess and provide basic tools required for the execution of the position of manual machinist.
  • Must be able to comply with all safety directives and programs established by the Company and or our customers.

The above list of activities is not all inclusive but a general representation of the requirements of an RMS Inc. Machinist. This list is subject to change based on the needs of the company.

Education:

  • High School Diploma / GED from an accredited school or institution.

Knowledge and/or Skill Requirements:

  • OMEGA experience
  • Proficient in running horizontal lathes, milling machines, VTL, and Bullard.
  • Capable of reading drawings and proper use of calibrated measuring tools.
  • Can hold tolerances of .0005".
  • Basic machining knowledge and practices required.
  • While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift.
  • Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance.
  • Must be able to use hands for assembly and tool.

Previous Experience:

  • 10 years or more of Manual Machinist experience required.

OTHER INFORMATION

The position will be based full time in PPMW facility (77003).

Physical Requirements:

  • While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift.
  • Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance.
  • Must be able to use hands for assembly and tool.

Work Environment:

While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts in a machine-shop environment.

WHAT WE OFFER

  • Competitive Pay
  • Paid Time Off
  • Medical / Dental / Vision
  • 401k
  • Employee Incentive Programs
  • Employee Reimbursement Programs

Come Join Rotating Machinery Services Inc. and watch your Career go TURBO

ABOUT RMS

Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry.

RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

  • CNC Machinist-1st shift

    2 months ago

    Houston, United States Dixon Incorporated Full time

    Dixon is looking for a CNC Operator to join its manufacturing team on 1st shift at their Houston, Texas facility. The CNC Operator will operate computer numerical controlled (CNC) lathes to produce precision metal components, inspect products to draw CNC Machinist, CNC Operator, CNC, Machinist, 1st Shift

  • CNC Machinist-1st shift

    4 weeks ago

    Houston, United States Dixon Incorporated Full time

    Dixon is looking for a CNC Operator to join its manufacturing team on 1st shift at their Houston, Texas facility. The CNC Operator will operate computer numerical controlled (CNC) lathes to produce precision metal components, inspect products to draw CNC Machinist, CNC Operator, CNC, Machinist, 1st Shift

  • CNC Machinist-1st shift

    1 week ago

    Houston, Texas, United States Dixon Incorporated Full time

    Dixon is looking for a CNC Operator to join its manufacturing team on 1st shift at their Houston, Texas facility. The CNC Operator will operate computer numerical controlled (CNC) lathes to produce precision metal components, inspect products to draw CNC Machinist, CNC Operator, CNC, Machinist, 1st Shift

  • CNC Machinist

    2 weeks ago

    Houston, United States Bray International, Inc. Full time

    Posting Details Posted: June 19, 2024 Full-Time Locations Showing 1 location Bray Controls dba 13333 Westland East Blvd Houston, TX 77041, USA Bray Controls dba 13333 Westland East Blvd Houston, TX 77041, USA Job Details Description CNC Machinists play a vital role within Bray Controls. If you are an experienced CNC...

  • Machinist 1st Shift

    1 month ago

    Houston, United States ResourceMFG Full time

    summary ResourceMFG is seeking a Machinist in Livonia! Must have 2-3 of relevant experience. Hours M-F 6am-3:30pm Pay $22/hr. possibly more based on experience. OT available, 40 hours guaranteed! Looking for Machinist experience, specifically Must have some machine shop experience. Must be able to read Blue Prints Must be able to use and read measuring...

  • Machinist 1st Shift

    3 weeks ago

    Houston, United States ResourceMFG Full time

    summary ResourceMFG is seeking a Machinist in Livonia! Must have 2-3 of relevant experience. Hours M-F 6am-3:30pm Pay $22/hr. possibly more based on experience. OT available, 40 hours guaranteed! Looking for Machinist experience, specifically Must have some machine shop experience. Must be able to read Blue Prints Must be able to use and read measuring...

  • 1st Shift Machinist

    4 days ago

    Houston, United States Rotating Machinery Svcs Inc Full time

    Job DescriptionJob DescriptionJOB SUMMARYRotating Machinery Services, Inc (RMS Inc.) is seeking a qualified Manual Machinist to work 1st shift and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. on rotating equipment components (pumps, turbines, compressors, and more) and assemblies to ensure...

  • 1st Shift Machinist

    4 days ago

    Houston, United States Rotating Machinery Svcs Inc Full time

    Job DescriptionJob DescriptionJOB SUMMARYRotating Machinery Services, Inc (RMS Inc.) is seeking a qualified Manual Machinist to work 1st shift and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. on rotating equipment components (pumps, turbines, compressors, and more) and assemblies to ensure...

  • 1st Shift Machinist

    4 weeks ago

    Houston, United States Rotating Machinery Svcs Inc Full time

    Job DescriptionJob DescriptionJOB SUMMARYRotating Machinery Services, Inc (RMS Inc.) is seeking a qualified Manual Machinist to work 1st shift and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. on rotating equipment components (pumps, turbines, compressors, and more) and assemblies to ensure...

  • 1st Shift Machinist

    4 weeks ago

    Houston, United States Rotating Machinery Svcs Inc Full time

    Job DescriptionJob DescriptionJOB SUMMARYRotating Machinery Services, Inc (RMS Inc.) is seeking a qualified Manual Machinist to work 1st shift and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. on rotating equipment components (pumps, turbines, compressors, and more) and assemblies to ensure...

  • 1st Shift Machinist

    1 week ago

    Houston, United States Rotating Machinery Svcs Inc Full time

    Job DescriptionJob DescriptionJOB SUMMARYRotating Machinery Services, Inc (RMS Inc.) is seeking a qualified Manual Machinist to work 1st shift and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. on rotating equipment components (pumps, turbines, compressors, and more) and assemblies to ensure...

  • 1st Shift Machinist

    1 week ago

    Houston, United States Rotating Machinery Svcs Inc Full time

    Job DescriptionJob DescriptionJOB SUMMARYRotating Machinery Services, Inc (RMS Inc.) is seeking a qualified Manual Machinist to work 1st shift and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. on rotating equipment components (pumps, turbines, compressors, and more) and assemblies to ensure...

  • 1st Shift Machinist

    4 weeks ago

    Houston, United States Rotating Machinery Svcs Inc Full time

    Job DescriptionJob DescriptionJOB SUMMARYRotating Machinery Services, Inc (RMS Inc.) is seeking a qualified Manual Machinist to work 1st shift and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. on rotating equipment components (pumps, turbines, compressors, and more) and assemblies to ensure...

  • 1st Shift Machinist

    4 weeks ago

    Houston, United States Rotating Machinery Svcs Inc Full time

    Job DescriptionJob DescriptionJOB SUMMARYRotating Machinery Services, Inc (RMS Inc.) is seeking a qualified Manual Machinist to work 1st shift and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. on rotating equipment components (pumps, turbines, compressors, and more) and assemblies to ensure...

  • 1st Shift

    1 month ago

    Houston, United States Prosources Trace-A-Matic LLC Full time

    Job DescriptionJob DescriptionDescription:Type: CNC Machinist, Full Time, 1st (6am to 6pm) shiftCompany: Trace-A-MaticLocation: Houston, TXAre you looking for growth and a challenge in your CNC Career? You will be exposed to a variety of materials and being a job shop you never know what you will be making next. We are looking to add skilled CNC Machinists...

  • 1st Shift

    4 weeks ago

    Houston, United States Prosources Trace-A-Matic LLC Full time

    Job DescriptionJob DescriptionDescription:Type: CNC Machinist, Full Time, 1st (6am to 6pm) shiftCompany: Trace-A-MaticLocation: Houston, TXAre you looking for growth and a challenge in your CNC Career? You will be exposed to a variety of materials and being a job shop you never know what you will be making next. We are looking to add skilled CNC Machinists...

  • 1st Shift

    1 week ago

    Houston, United States Prosources Trace-A-Matic LLC Full time

    Job DescriptionJob DescriptionDescription:Type: CNC Machinist, Full Time, 1st (6am to 6pm) shiftCompany: Trace-A-MaticLocation: Houston, TXAre you looking for growth and a challenge in your CNC Career? You will be exposed to a variety of materials and being a job shop you never know what you will be making next. We are looking to add skilled CNC Machinists...

  • 1st Shift

    4 weeks ago

    Houston, United States Prosources Trace-A-Matic LLC Full time

    Job DescriptionJob DescriptionDescription:Type: CNC Machinist, Full Time, 1st (6am to 6pm) shiftCompany: Trace-A-MaticLocation: Houston, TXAre you looking for growth and a challenge in your CNC Career? You will be exposed to a variety of materials and being a job shop you never know what you will be making next. We are looking to add skilled CNC Machinists...

  • CNC Machinist

    7 days ago

    Houston, United States Bray Architects Full time

    CNC Machinists play a vital role within Bray Controls. If you are an experienced CNC Machinist, it's time to take that experience to the next level with Bray and use your machining background to advance your career. Bray compensates machinists for continuing their education in areas that will further their knowledge and expertise in performing the CNC...

  • CNC Machinist

    2 weeks ago

    Houston, United States Bray Architects Full time

    CNC Machinists play a vital role within Bray Controls. If you are an experienced CNC Machinist, it's time to take that experience to the next level with Bray and use your machining background to advance your career. Bray compensates machinists for continuing their education in areas that will further their knowledge and expertise in performing the CNC...