1st Shift Machinist

4 weeks ago

Anoka, United States Mate Precision Technologies Full time
Job DescriptionJob DescriptionDescription:

The Grade 40 Machinist in the Special Assemblies department at Mate Precision Technologies will set up and operate various types of conventional and CNC (computer numerical control) machines and machining centers and qualify the produced parts.


Essential Duties/Responsibilities:

  • Sets up and works on machines of moderate complexity and difficulty, such as grinders, mills, and EDMs.
  • Ability to work on non-standard products.
  • Inspects work using gaging and inspection devices to verify conformance to specifications.
  • Meets expectations for productivity and quality and strives for continuous improvement.
  • May train others, troubleshoot, or work with support groups as needed.
  • Participates in continuous improvement practices such as 5S, Kaizen events, value stream mapping or other improvement projects or teams.
  • Works to achieve work center guideline certification.
  • Follows guidelines established for work scheduling and understands delivery objectives.
  • Reports any machine or process problems.
  • Works with the following tools: Kennedy box or equivalent, micrometers to 6-inch, 6-inch scale, pliers, screwdriver, and adjustable wrench. ball-peen hammer and soft hammer, dial caliper, hex wrench set, calculator, indicator, swivel clamp, magnetic base, protractor, radius gauge set, and an edge finder.
  • Promotes a safe working environment and follows safety guidelines.
  • Collaborates with others, is open-minded, responsive, and supports others' efforts to succeed.
  • Demonstrates integrity by being dependable, having good judgment, being honest, and taking responsibility for their actions.
  • Respectful of others, encouraging others to share their ideas, actively listening to others, and having common courtesy.
  • Other duties as assigned.
Requirements:
  • A high school diploma or equivalent is required.
  • A two-year degree from a technical college or 4 years of related experience is required.
  • 1 - 2 years of experience setting up machine tools is required.
  • Experience working with at least two different types of CNC machines is required.
  • Experience using inspection devices is required.
  • Experience working with computers and ERP systems is required.
  • Knowledge of machine tooling, fixtures, products, and processes is required.
  • A basic understanding of the machines and basic programming features is required.
  • Ability to adapt when things change.
  • Experience with inspection devices.
  • Required tools: Micrometers to 6 inches, pliers, screwdrivers, wrenches, dial or digital caliper, .0005 indicator and magnetic base, and other tools as required by the specific machines and/or jobs assigned to the employee.
  • The ability to effectively communicate in written and verbal English is required.
  • Experience with reading prints.
  • Experience with geometric dimensioning and tolerancing standards.
  • Good understanding of mathematical concepts and terms.

Physical Requirements and Work Environment:

  • Frequent walking and standing.
  • Occasional bending and stooping.
  • Use of hand to finger.
  • Lift, move, and pull up to 25 pounds.
  • Occasional lifting and moving up to 60 pounds.
  • Reach with hands and arms.
  • The noise level in the work environment is moderate.
  • Occasional exposure to fumes or airborne particles.

Pay, Work Schedule, & Benefits:

  • Pay Range: $28.39 - $37.14/hour, depending on experience.
  • Scheduled Work Hours: Monday-Friday from 6:30 AM to 3:00 PM
  • Rich benefits package including Medical, Dental, Vision, Life Insurance, Short-Term and Long-Term Disability, PTO, Paid Holidays, and More
  • Retirement 401(k) plan with employer match and profit-sharing plan.
  • Award-winning Wellness Program.
  • Tuition Reimbursement.

  • 1st Shift Machinist

    3 days ago

    Anoka, United States Mate Precision Technologies Full time

    Description:The Grade 40 Machinist in the Special Assemblies department at Mate Precision Technologies will set up and operate various types of conventional and CNC (computer numerical control) machines and machining centers and qualify the produced parts.Essential Duties/Responsibilities:Sets up and works on machines of moderate complexity and difficulty,...

  • Machinist Assistant

    4 weeks ago

    Anoka, United States RMS Full time

    Overview: About rms Company rms Company is a company that is very successful because of its employees. We value performance and pay competitive wages along with a rich benefit package. We manufacture life saving device components so quality is always our focus. We carry that focus into every aspect of our operation. We have a state of the art facility but it...

  • CNC Machinist Assistant

    7 days ago

    Anoka, United States RMS Full time

    Overview: About rms Company rms Company is a company that is very successful because of its employees. We value performance and pay competitive wages along with a rich benefit package. We manufacture life saving device components so quality is always our focus. We carry that focus into every aspect of our operation. We have a state of the art facility but it...

  • CNC Mill Machinist Upto

    2 weeks ago

    Anoka, Minnesota, United States Aerotek Full time

    **Looking for CNC Mill Machinist with Pay upto $36/hr (depending on interview)** **?** **Job Description/Work Environment** : + Candidate will be doing full setups on several CNC Mills, including conversational Hurco Mills, as well as Doosan and Brothers CNC Mills. + Will need to be able to do setup full setup from blueprints. + Very clean shop - new...

  • Machinist Assistant

    2 weeks ago

    Anoka, Minnesota, United States rms Company Full time

    Overview:About rms Companyrms Company is a company that is very successful because of its employees. We value performance and pay competitive wages along with a rich benefit package. We manufacture life saving device components so quality is always our focus. We carry that focus into every aspect of our operation. We have a state of the art facility but it...

  • CNC Mills Machinist Assistant

    2 weeks ago

    Anoka, Minnesota, United States rms Company Full time

    Overview:rms Company provides contract manufacturing of high-quality, tight-tolerance medical implants, components and sub-assemblies using cutting-edge technology. rms is part of the Cretex Medical family of companies. Learn more at and .Milling CNC Machinist Position SummaryThe Milling CNC Machinist operates CNC machines to support the manufacture of...

  • CNC Mill Machinist Upto $36/hr

    4 weeks ago

    Anoka, United States Aerotek Full time

    **Looking for CNC Mill Machinist with Pay upto $36/hr (depending on interview)** **?** **Job Description/Work Environment** : + Candidate will be doing full setups on several CNC Mills, including conversational Hurco Mills, as well as Doosan and Brothers CNC Mills. + Will need to be able to do setup full setup from blueprints. + Very clean shop - new...

  • Machinist - 2nd Shift

    2 weeks ago

    Anoka, United States Mate Precision Technologies Full time

    Job Type Full-timeDescriptionThe Grade 40 Machinist-Special Assemblies/Accessories/PBT at Mate Precision Technologies will set up and operate various conventional and computer numerical control (CNC) machines and machining centers and complete the qualification for the parts produced.Essential Duties/Responsibilities:Set up and work on machines of moderate...

  • Machinist - 2nd Shift

    2 weeks ago

    Anoka, United States Mate Precision Technologies Full time

    Job DescriptionJob DescriptionDescription:The Grade 40 Machinist—Special Assemblies/Accessories/PBT at Mate Precision Technologies will set up and operate various conventional and computer numerical control (CNC) machines and machining centers and complete the qualification for the parts produced.Essential Duties/Responsibilities:Set up and work on...

  • Machinist - 2nd Shift

    4 weeks ago

    Anoka, United States Mate Precision Technologies Full time

    Job DescriptionJob DescriptionDescription:The Grade 40 Machinist—Special Assemblies/Accessories/PBT at Mate Precision Technologies will set up and operate various conventional and computer numerical control (CNC) machines and machining centers and complete the qualification for the parts produced.Essential Duties/Responsibilities:Set up and work on...

  • Machinist - 2nd Shift

    2 weeks ago

    Anoka, Minnesota, United States Mate Precision Technologies Full time

    Job DescriptionJob DescriptionDescription:The Grade 40 Machinist—Special Assemblies/Accessories/PBT at Mate Precision Technologies will set up and operate various conventional and computer numerical control (CNC) machines and machining centers and complete the qualification for the parts produced.Essential Duties/Responsibilities:Set up and work on...

  • Machinist - 2nd Shift

    4 weeks ago

    Anoka, United States Mate Precision Technologies Full time

    Job Type Full-time Description The Grade 40 Machinist-Special Assemblies/Accessories/PBT at Mate Precision Technologies will set up and operate various conventional and computer numerical control (CNC) machines and machining centers and complete the qualification for the parts produced. Essential Duties/Responsibilities: Set up and work on machines of...

  • Machinist A

    4 weeks ago

    Anoka, United States Multisource Mfg Full time

    POSITION PURPOSE: Sets-up, operates, and verifies the quality of work on a wide variety of CNC machines involving close tolerances and difficult set-ups. Performs routine or repetitive operations in a manner which will consistently meet quality requirements and production standards. Actively participates in continuous improvement activities. ESSENTIAL...

  • Machinist A

    4 weeks ago

    Anoka, United States MultiSource Mfg Full time

    Job DescriptionJob DescriptionPOSITION PURPOSE:Sets-up, operates, and verifies the quality of work on a wide variety of CNC machines involving close tolerances and difficult set-ups. Performs routine or repetitive operations in a manner which will consistently meet quality requirements and production standards. Actively participates in continuous improvement...

  • Assembly Operator

    3 weeks ago

    Anoka, United States nVent Management Company Full time

    We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. Starting hourly pay is up to $21.00+ with overtime opportunities nVent is looking for entry level and skilled Assembly...

  • Machinist A

    2 weeks ago

    Anoka, United States MultiSource Mfg Full time

    Job DescriptionJob DescriptionMultiSource Manufacturing LLC is a customer-focused contract manufacturer working to provide high quality engineering and fabrication services. We strive to be a comprehensive resource for all the services you need from hands-on project management to industry standardized installation. For precision machining to complete...

  • Machinist A

    1 week ago

    Anoka, United States MultiSource Mfg Full time

    Job DescriptionJob DescriptionMultiSource Manufacturing LLC is a customer-focused contract manufacturer working to provide high quality engineering and fabrication services. We strive to be a comprehensive resource for all the services you need from hands-on project management to industry standardized installation. For precision machining to complete...

  • Machinist A

    4 weeks ago

    Anoka, United States MultiSource Mfg Full time

    Job DescriptionJob DescriptionMultiSource Manufacturing LLC is a customer-focused contract manufacturer working to provide high quality engineering and fabrication services. We strive to be a comprehensive resource for all the services you need from hands-on project management to industry standardized installation. For precision machining to complete...

  • Machine/Saw Operator

    2 weeks ago

    Anoka, Minnesota, United States Aerotek Full time

    LOOKING FOR A MACHINE/SAW OPERATOR*1st Shift | Pay- $18/hr to $22/hrAnoka,MN*Description:The individual will be responsible for running 3 automatic saws to cut pipes for both Machinists and Assemblers. These pipes are used in the oil and gas industry. Candidates will have to use a tape measure to ensure the correct lengths are cut. Measure twice, cut...

  • Welder II

    3 weeks ago

    Anoka, United States Life Fitness Full time

    Join us as we empower the world to work out, creating healthier lives together.About the Opportunity: JOB PURPOSE: Produce a wide variety of weldments in a safe, quality and productive manner. ESSENTIAL JOB FUNCTIONS: Prior to each job, accurately count all pieces to ensure no extra/missing parts Set-up jobs; load and unload jigs Operate welding equipment...