CNC Operator II
1 month ago
Job Location
615 - Zeeland, MI
CNC Operator II - Panels (1st Shift)
As a CNC Operator II you will load programs and perform operations such as sawing, drilling, and routing on the CNC machining center. Select and install proper fixtures when required for a particular part and perform minor modifications to program when required.
Currently there are openings for full-time CNC Operator II in our Panels division on 1st shift.
1st shift would be Monday-Friday 6:30AM to 2:30PM.
CNC Operator II: Starting at $21.69 per hour on 1st shift based on experience.
Key Responsibilities:
- Understands and performs duties of CNC Mill Operator I.
- Exhibits strong technical aptitude and understanding of the CNC machining operations.
- Gather Material according to work order.
- Properly complete setup tasks which include setting/identifying drills/endmills/cutters and other applicable tooling, panel/part layout, fixture layout (if applicable), vacuum table utilization/proper vacuum level, pre-running program cycle prior to running production parts and validating it is acceptable to run production.
- Basic understanding of G and M codes.
- Working knowledge of OSAI controls and/or Fanuc, Mazak, Hass controls.
- Can successfully load and edit CNC program if necessary.
- Select proper fixture for the part/work order.
- Determine if the CNC table working surface is adequate or needs to be prepped.
- Carry out tasks such as sawing, routing, and drilling on the mill safely.
- Select proper fixture for the part/work order.
- Perform required quality checks before, during, and after machining utilizing blueprints, calipers, heigh, gage, etc.
- Print and post work schedules for the work center.
- Interpret and follow work schedules for the work center.
- Maintain CNC equipment and tooling.
- Provide the customer with the best value including Cost, Quality, and Delivery.
- Participate in improving our product, processes, equipment, and methods via communication of issues and opportunities to supervisors, engineers, and programmers.
- Handle internal and external questions in a prompt professional manner.
- Maintain a clean and safe work environment at all times.
- Continually look for ways to improve job efficiency and performance.
- Assist other departments as necessary.
- Perform all reasonably related duties as assigned.
Qualifications:
- High school diploma or GED preferred.
- At least 3 years of CNC experience required.
- Strong attention to detail
- Ability to work overtime.
Requirements:
- Must be eligible to work on programs subject to ITAR Regulations. Therefore, candidates must be a U.S. Citizen or a U.S. Permanent Resident ('Green Card').
Plascore is an established global manufacturer of honeycomb core, composite structures, and cleanrooms. Plascore's light weight, industrial strength, honeycomb technology is utilized for a multitude of applications within the aerospace, automotive and marine industries. Plascore is an employee driven organization, fueled by professional teams with dedicated years of service to manufacturing.
Plascore Benefits:
Bonus Programs
- $1,200 Sign-On Bonus - Paid in monthly increments.
- $1,200 Employee Referral Bonus - Paid in monthly increments.
- Profit Sharing Bonus - Paid out each quarter.
Health Benefits
- Health Insurance (Medical, Dental, Vision) with Flex Spending or Health Savings Accounts
- New Hires are eligible for health insurance benefits on day one
- Short-term and long-term disability coverage
- Employee Assistance Program
Paid Time Off
- Prorated 2 weeks of paid vacation to start with yearly increases (2 additional days each year) up to a maximum of 6 weeks.
- Prorated 4 weeks of unpaid leave decreases yearly as more paid vacation is earned until maximum of 6 weeks paid vacation.
- 10 weeks of paid vacation for 11th year (4 weeks of paid vacation awarded for 10 years of service + 6 weeks earned)
- Paid Holidays
- Parental Leave
401(K) & Roth IRA
- 50% match up to 6% for all participating employees.
Educational Support
- Tuition Reimbursement for job-related and certificate programs
Child Care
- Flex Spending Account for childcare
- Tri-Share childcare program
Company Events
- Annual company picnic
- Annual golf outing
- Annual holiday party
Other Perks
- White-Caps baseball ticket raffles
- Clean work environment
- Smooth pace of work
- Family owned and operated.
- Security of work for an established, growing company that serves a diverse customer base.
- Bi-Weekly Pay
We are an EEO employer dedicated to workforce diversity.
-
CNC Operator II
1 month ago
Zeeland, United States Plascore Full timeJob DetailsJob Location615 - Zeeland, MICNC Operator II - Panels (1st Shift)As a CNC Operator II you will load programs and perform operations such as sawing, drilling, and routing on the CNC machining center. Select and install proper fixtures when required for a particular part and perform minor modifications to program when required. Currently there are...
-
CNC Operator II- Machined Core
3 weeks ago
Zeeland, United States PLASCORE INC Full timeJob DetailsJob Location450A - ZEELAND, MICNC Operator II- Machined Core (Weekend Shift)As a CNC Operator II you will perform operations such as drilling and routing on the CNC machining center. Select and install proper fixtures when required for a particular part and perform minor modifications to program when required. Currently there are openings for...
-
CNC Operator- Machined Core
3 weeks ago
Zeeland, United States PLASCORE INC Full timeJob DetailsJob Location450A - ZEELAND, MICNC Operator- Machined Core (Weekend Shift)As a CNC Operator you will load programs and perform operations such as sawing, drilling, and routing on the Machined Core CNC machining center. Currently there are openings for full-time CNC Operator in our Machined Core division on the Weekend shift.Weekend Shift: Friday,...
-
CNC Machinist
3 weeks ago
Zeeland, United States Kelly Full timeAt Kelly®, we’re passionate about helping you find a job that works for you. How about this one? We’re seeking a CNC Machinist to work at a premier company in Zeeland, MI. With us, it’s all about finding the job that’s just right. Why you should apply to be a CNC Machinist: 1st shift, 7:30-4:30 M-F Pay rate of $22-34 based on experience....
-
Quality Assurance Inspector II
2 months ago
Zeeland, United States PLASCORE INC Full timeJob DetailsJob Location450A - ZEELAND, MIJob CategoryQA - Quality ControlQuality Assurance Inspector II - Machined Core (2nd Shift)As a Quality Assurance Inspector II you will inspect products at various stages of the production process. You will compile and evaluate statistical data to determine and maintain quality and reliability of products by performing...
-
Maintenance Mechanic II
3 weeks ago
Zeeland, United States PLASCORE INC Full timeJob DetailsJob Location500A - ZEELAND, MIPosition TypeFull TimeEducation LevelHigh SchoolJob Shift1st shiftMaintenance Mechanic II - Aramid (1st Shift)Currently there is an opening for a Maintenance Mechanic II in our Aramid division on 1st shift (6:30AM to 2:30PM Mon-Friday). This position will ensure that all plant equipment and machinery is maintained in...
-
Quality Assurance Inspector II
1 month ago
Zeeland, United States PLASCORE INC Full timeJob DescriptionJob DetailsJob Location450A - ZEELAND, MIJob CategoryQA - Quality ControlQuality Assurance Inspector II - Machined Core (2nd Shift)As a Quality Assurance Inspector II you will inspect products at various stages of the production process. You will compile and evaluate statistical data to determine and maintain quality and reliability of...
-
Maintenance Mechanic II
3 weeks ago
Zeeland, United States Plascore Inc Full timeCurrently there is an opening for a Maintenance Mechanic II in our Aramid division on1st shift (6:30AM to 2:30PM Mon-Friday). This position will ensure that all plant equipment and machinery is maintained in working order. Build and rebuild equipment to meet manufacturing needs. Perform general building and site maintenance.Key Responsibilities:Maintain all...
-
Manual Machinist
2 weeks ago
Zeeland, United States Talent Strategy Full timeJob DescriptionJob DescriptionManual MachinistLocation: Zeeland, MIShift: 3rd shiftPay: $21-24/hourWhat You Will Be Doing:•Setting up, operating and editing programs on multi-axis machining centers•Performing tool offsets and changes as needed•Conducting inspection checks on parts for measurement and flow accuracy•Using various inspection equipment,...
-
Embedded C Software Engineer II
3 months ago
Zeeland, United States iMPact Business Group Full timeJob Description An iMPact Business Group client is seeking to hire multiple Embedded C Software Developers. This position is for mid-level level Embedded Software Engineers. This role involves - Full development lifecycle stages including: Requirements Analysis, Software Architecture, Software Design, Algorithm Design, Embedded C programming, Unit Test...
-
Quality Assurance Inspector II
3 weeks ago
Zeeland, MI, United States PLASCORE INC Full timeJob DescriptionJob DetailsJob Location450A - ZEELAND, MIJob CategoryQA - Quality ControlQuality Assurance Inspector II - Machined Core (2nd Shift)As a Quality Assurance Inspector II you will inspect products at various stages of the production process. You will compile and evaluate statistical data to determine and maintain quality and reliability of...
-
Data Scientist
2 months ago
Zeeland, United States Gentex Corporation Full timeAdvance the automotive market and advance your career at Gentex! Join a collaborative culture devoted to innovation, cooperation, and continuous improvement. Your ideas are not just heard, they are celebrated! Explore Gentex today! POSITION OVERVIEW The Data Scientist II will use statistical methods and machine learning to create predictive models,...
-
Thin Films Process Engineer
3 months ago
Zeeland, United States Gentex Corporation Full timeAdvance the automotive market and advance your career at Gentex! Join a collaborative culture devoted to innovation, cooperation, and continuous improvement. Your ideas are not just heard, they are celebrated! Explore Gentex today! POSITION OVERVIEW The purpose of the Process Engineer II is to manage projects related to developing, designing and supporting...