Mechanic I

4 weeks ago

McBee SC United States Carpenter Technology Full time

Job Description
The Carpenter Technology Corporation Hartsville Operations" located in McBee, South Carolina, is a mini-mill supplying a variety of sizes and specifications of high-quality round, square and hexagonal stainless steel bars for distribution. Carpenter Technology acquired Talley Metals in 1997 to increase manufacturing capacity within the corporation's core Specialty Alloys Operations division.

MECHANIC I

ESSENTIAL DUTIES AND RESPONSIBILITIES Other duties may be assigned, including but not limited to housekeeping, cross training and operator level maintenance in support of equipment operation. Responsibilities also include attention to safety according to specific training and safety rules.

Studies blueprint or layout on work-piece to visualize machining required, and plans sequence of operations. Selects method of holding work-piece. Lifts work-piece manually or using hoist, and positions and secures it to holding device such as machine table, chuck, centers, or fixture. Verifies work-piece position. Selects feed rate, cutting speed, depth of cut, and cutting tool (bar tool, rotary cutter, or abrasive wheel) for each operation. Positions and secures tool in tool-holder (chuck, collet, or tool-post). Moves controls to position tool and work-piece in relation to each other, and to set feeds, speeds, and depth of cut. Starts machine, turns hand-wheel to feed tool into work-piece or vice versa, and engages automatic feeding device. Turns valve handle to start flow of coolant against tool and work-piece. Observes operation and regulates tool position and action. Verifies conformance of machined work-piece to specifications. Measures, marks, and scribes work-piece to lay-out for machining. Devises ways of clamping work-pieces and makes special jigs and fixtures as needed. May assist maintenance mechanics/electricians in trouble-shooting and/or installation of repaired/fabricated part. Devises, implement, and maintain Preventive Maintenance program for the machine shop tools and equipment, including support systems such as air supply, lubrication, and coolant systems. Responsible to learn and adhere to all company and common-sense safety procedures and to use available safety equipment as appropriate. Responsible for housekeeping in the machine shop area. Works on nonmetallic materials. Assists in the training of less experienced machinists as well as other mechanics/electricians.

EXPERIENCE AND TRAINING REQUIRED

Associate's degree (A. A.) or equivalent from two-year college or technical school and up to two years of on-the-job experience; or equivalent combination of education and experience. Must be able to demonstrate skills through testing and practical application before moving from one skill level to the next.

Specific initial and recurring training requirements may be found on the Job Qualification Check Sheet (JQC) for this position

PHYSICAL DEMANDS/WORK ENVIRONMENT

While performing the duties of this job, the employee is regularly required to stand and talk or hear. The employee frequently is required to reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, and depth perception. The employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to airborne particles. The noise level in the work environment is usually loud.

PREFERRED FOR THE MECHANIC I

Excellent written and verbal communication skills, well organized and the ability to prioritize tasks and make appropriate decisions.
Willing to work in a fast paced, every changing work environment.
Mechatronics degree preferred

Carpenter Technology Company offers a competitive salary and a comprehensive benefits package including life, medical, dental, vision, flexible spending accounts, disability coverage, 401k with company contributions as well as many other options to employees.

Carpenter Technology Corporation's policy is to fully and effectively maintain a program of equal employment opportunity and nondiscrimination for all employees, to employ affirmative action for all protected classes, and to recruit and develop the best qualified persons available regardless of age, race, color, religion, sex, gender identity, sexual orientation, marital status, national origin, political affiliation or any other characteristic protected by law. The Company also will recruit, develop and provide opportunities for qualified persons with disabilities and protected veterans.

  • Electrician I

    3 weeks ago

    McBee, United States Carpenter Technology Full time

    At Carpenter Technology, we're always ready for the next big thing. Exploring Mars on the Perseverance Rover. Changing lives with cutting-edge medical implants. Keeping the country moving with standard and electric motors. Fueling progress with oil, gas, and renewable energy. Our materials build more than parts, they build possibilities. And none of those...

  • Electrician I

    1 day ago

    McBee, South Carolina, United States Carpenter Technology Full time

    At Carpenter Technology, we're always ready for the next big thing. Exploring Mars on the Perseverance Rover. Changing lives with cutting-edge medical implants. Keeping the country moving with standard and electric motors. Fueling progress with oil, gas, and renewable energy. Our materials build more than parts, they build possibilities. And none of those...

  • E&I Mechanic

    4 weeks ago

    Jackson, AL, United States Packaging Corporation of America Full time

    We are looking for applicants for E&I Mechanic in our Jackson, AL Mill. Responsibilities:Ensuring proper operation of all electrical/control system components including electronic components, motors, solenoids, limit switches, programmable logic control (PLC) I/O modules and photo-eye sensorsTroubleshooting, problem solving and resolving issues at machine...

  • Mechanical Design Engineer I

    4 weeks ago

    Miami, FL, United States Pall Full time

    Find what drives you on a team with a more than 75-year history of discovery, determination, and innovation. As a global leader in high-tech filtration, separation, and purification, Pall Corporation thrives on helping our customers solve their toughest challenges. Our products serve diverse, global customer needs across a wide range of applications to...

  • Mechanic I

    3 weeks ago

    Norco, LA, United States Marathon Petroleum Full time

    An exciting career awaits youAt MPC, were committed to being a great place to work one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment.An exciting career awaits youAt MPC, were committed to being a great place to work one that welcomes new ideas, encourages diverse perspectives,...

  • Diesel Mechanic

    4 weeks ago

    Cary, NC, United States US Foods, Inc. Full time

    DieselMechanic will be responsible for the troubleshooting, repair and maintenance of the Fleet road equipment including tractor, trailer, thermo-king, converter dolly and maintenance vehicles. Ensure compliance with all State and Federal trucking regulations. Mechanics will also be responsible for the documentation, completion, and to keep current the...

  • Mechanical Engineer I

    2 days ago

    United, United States Dorman Products Full time

    Dorman was founded on the belief that people should have greater freedom to fix motor vehicles. For over 100 years, we have been driving new solutions, releasing tens of thousands of aftermarket replacement products engineered to save time and money, and increase convenience and reliability. Founded and headquartered in the United States, we are a pioneering...

  • Fleet Mechanic

    4 minutes ago

    Tucker, GA, United States US Foods, Inc. Full time

    BECOME AUS FOODSFLEET MECHANICOur Sr. Fleet Mechanics make$39 an hour! Also, US FOODS FleetMechanics earn clean and safe shop bonuses, uniform allowance, tool allowance, and continuous growth and training opportunities!We help you make it! US FOODSis one of the largest food distributors with a culture and history of promotion from within, excellent training...

  • Mechanical Engineering Manager

    2 days ago

    united states, united states, us Genesis Technical & Industrial Staffing Full time

    Genesis Technical is seeking an en experienced Mechanical Engineering Manager in the Mobile, AL area. This would be a direct, onsite role. AUTHORITIES / RESPONSIBILITIES:Responsible for overseeing Department Goals for a specific project as directed by the Program Engineer and Chief Department EngineerResponsible for preparing, overseeing and assigning design...

  • Mechanic

    2 weeks ago

    Darien Center, NY, United States Six Flags Darien Lake Full time

    JOB PURPOSE:To ensure the safe operation and maintenance of all rides and attractions.KEY DUTIES AND RESPONSIBILITIES:Maintain, erect, repair and troubleshoot rides and attractions to insure their safe and efficient operation with minimum supervision.To keep a ride parts inventory and notify the supervisor and A Mechanics of any parts or materials necessary...

  • 310T Mechanic

    4 weeks ago

    Canandaigua, NY, United States GFL Environmental Full time

    Join our team as a 310T Licensed Mechanic at GFL Environmental in Sudbury, Ontario!Whats in it for you:Comprehensive Benefits Plan with Prioritized Orthodontics and Vision Care, RRSP Matching and Profit Sharing, Employee Assistance Program, Life Insurance and more!Shift premiums for afternoon and weekend shifts. Paid time off Competitive wages Boot...

  • Metallographer I

    4 weeks ago

    Richburg, SC, United States Acuren Full time

    Acuren Inspection is currently recruiting for a Metallographer I to support our operations in Richburg, SC. THIS IS A HIGH VOLUME LAB SETTING. FLEXIBLE SCHEDULE. Apply criteria expressed in material and process specifications to the evaluation of suitably prepared metallurgical specimens and generate reports. Associates degree or two years of post-high...

  • Vehicle Maintenance Mechanic

    3 weeks ago

    Lexington, SC, United States Clean Harbors Full time

    Clean Harbors  Lexington, South Carolina is looking for a Diesel Vehicle Mechanic  to join their safety conscious team! This position will be responsible for the repairs and preventative maintenance of all company owned fleet.  Why work for Clean Harbors? Health and Safety is our #1 priority and we live it 3-6-5! Competitive wages  Pay is based on...

  • Diesel Mechanic

    4 weeks ago

    Glendale, AZ, United States Knight Transportation Full time

    Knight Transportation  We are urgently hiring Diesel Mechanics for our Phoenix location. If you are highly motivated and ready to make an impact, this is the role for you!  Ready to take your skills to the next level? Step into a role where learning never stops. We provide hands-on OEM training with top manufacturers such as Freightliner, International,...

  • Diesel Mechanic

    2 days ago

    Mission, KS, United States Knight Transportation Full time

    Knight Transportation   We are urgently hiring Diesel Mechanics for our Kansas City location. If you are highly motivated and ready to make an impact, this is the role for you! Ready to take your skills to the next level? Step into a role where learning never stops. We provide hands-on OEM training with top manufacturers such as Freightliner,...

  • Mechanic

    4 days ago

    Bronx, NY, United States First Student Full time

    First for a reason:At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they...

  • Lead Vehicle Mechanic

    1 week ago

    Lexington, SC, United States Clean Harbors Full time

    Clean Harbors  Lexington, SC is looking for a  Lead Diesel Mechanic  to join their safety conscious team! The Lead Diesel Mechanics are responsible for overseeing the day-to-day operations of the shop, which include supervising all maintenance work, assuring company fleet is within DOT compliance, as well as maintaining all service and parts...

  • Mechanic

    3 weeks ago

    Buffalo, NY, United States First Group Full time

    First for a reason:At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they...

  • OLP Maintenance Technician I

    4 weeks ago

    Myrtle Beach, SC, United States Ocean Lakes Family Campground Full time

    Ocean Lakes Family Campground of Myrtle Beach, SC is actively seeking a positive and energetic individual for our OLP Maintenance Technician I position! The ideal candidate must be self-motivated, driven, and mechanically inclined. This position includes excellent perks like getting PAID WEEKLY, flexible schedules, discounts, and access to all...

  • Diesel Mechanic/Technician I

    4 weeks ago

    Versailles, IN, United States Penske Logistics Full time

    Diesel Mechanic/Technician I - Experienced Location: 3721 O'Hara Rd Erlanger, KY 41018Refer experience required$36.05 What s the Job? Ready to move your career forward? As an experienced Technician at Penske, you ll do exactly that. Here, you ll perform preventative maintenance and repairs of all levels on the newest and best maintained fleet of vehicles in...