Radio Frequency Technician

7 days ago

Draper UT United States SIMCO Electronics Full time

Position Overview


The Radio Frequency Technician will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Radio Frequency Technician will identify and utilize appropriate manual and automated measurement procedures.


This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Radio Frequency Calibration Technician will perform laboratory housekeeping and may perform some administrative duties. The Radio Frequency Technician may be asked to report opinions and interpretations.


Responsibilities and Duties

  • Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications
  • Working with a range of RF-enabled devices including cell phone antennas, amplifiers, two-way radios, satellite systems, and internet access points.
  • Troubleshooting circuits used in RF transmission independently and with site engineers.
  • Identifying and repairing faults in finished assemblies making adjustments as required.
  • Identifying the causes of faults and work with on-site teams to implement preventative measures so that they do not happen again.
  • Model creation, assembly, tuning, and plan development as well as modifying antenna prototypes, parts, and assemblies.
  • Maintaining documentation of test cases.
  • Performing routine antenna capability tests.
  • Maintain primary and/or intrinsic calibration standards
  • Maintain secondary and/or working calibration standards
  • Perform maintenance, troubleshooting and repair of precision equipment
  • Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements
  • Collect, compile, measure, summarize, and record data gathered during calibration.
  • Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc
  • Identify and correct measurement errors, as applicable
  • Prepare calibration reports and certificates
  • Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used
  • Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes
  • Train subordinates in calibration concepts and procedures
  • Interact with other technicians, Customer Service Representatives, Account Managers, and customers
  • Other duties and responsibilities as may be assigned


Qualifications

  • Minimum High School diploma or equivalent
  • Must be able to perform general math and algebra functions
  • Understanding of Basic Statistics
  • Must possess good written and oral, communication skills
  • Technical writing ability
  • Intermediate ability to troubleshoot repair, align and optimize precision equipment
  • Intermediate computer skills
  • Proficient in use of MS Word and Excel
  • Minimum three years of calibration experience some of which can be offset with formal metrology training
  • Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540)
  • Must have great interpersonal and customer service skills
  • Strong attention to details
  • Must be a self-motivator, work as a team player, and follow written procedures


Physical Demands

  • Must be able to lift up to 45 pounds without assistance
  • Occasional standing and bending are required


Working Environment

Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites

Travel may be required to other domestic and possibly international locations


What We Offer

  • Full - Time, non-exempt position
  • Excellent benefits package includes; medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursement
  • Vacation, sick and paid holidays


SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training.

  • Radio Frequency Technician

    4 weeks ago

    Draper, United States SIMCO Electronics Full time

    Position OverviewThe Radio Frequency Technician will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement...

  • Radio Frequency Technician

    4 weeks ago

    Draper, United States SIMCO Electronics Full time

    Position OverviewThe Radio Frequency Technician will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement...

  • Radio Frequency Calibration Specialist

    4 weeks ago

    Draper, Utah, United States SIMCO Electronics Full time

    Job Title: Radio Frequency TechnicianAt SIMCO Electronics, we are seeking a highly skilled Radio Frequency Technician to join our team. As a key member of our calibration team, you will be responsible for ensuring the accuracy and precision of our measurement equipment.Key Responsibilities:Calibrate inspection, measurement, and test equipment (IM&TE) in...

  • Radio Frequency Technician

    3 days ago

    Phoenix, AZ, United States SIMCO Electronics Full time

    Position OverviewThe Radio Frequency Calibration Technician will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure...

  • Radio Frequency Technician

    4 days ago

    Aurora, CO, United States Insight Global Full time

    Client: Start-Up that is backed by the National Science Foundation and Air Force (millions in funding)Title: Radio Frequency Electronic TechnicianDuration: Perm/Direct HireSalary: $60,000 to $90,000Location: Aurora, COJob Overview: This job supports researchers and engineers in prototyping HF RF systems to validate composite antennas. The job requires a...

  • Radio Frequency Engineer

    6 days ago

    Cleveland, OH, United States RFI Technology Solutions Full time

    RF ENGINEERJoin a dynamic, fun and supportive workplaceYou’ll ideally be based in either Houston or ClevelandAccess to great employee benefitsWe embrace diversity and inclusion and support a culture where individuals of all backgrounds and abilities feel included and confident in bringing their whole selves to workJoin a market leader in wireless products...

  • Radio Frequency Engineer

    6 days ago

    San Antonio, TX, United States Apex Systems Full time

    Radio Frequency (RF) Network Engineer Length1 year contract (Possible extension or conversion)ShiftMonday- Friday Core Hours Location4 days onsite, 1 day remote in San Antonio, TX Compensation$65-75/hr. ExperienceMid- Senior Level Network Engineer *If interested and qualified, please contact the Professional Recruiter, Nicole, at nrosipal@apexsystems.comJob...

  • Radio Frequency

    7 days ago

    Danbury, CT, United States Amphenol RF Full time

    JOIN OUR TEAM @ AMPHENOL RF, the world's largest manufacturer of coaxial interconnect products for radio frequency, microwave, and data transmission applications, and a proven leader in enabling next-gen technology!At Amphenol RF, our global team of experienced engineers develops innovative solutions utilizing the most advanced manufacturing technology...

  • Radio Frequency Engineer II

    4 days ago

    Fort George G Meade, MD, United States eSimplicity Full time

    About UseSimplicity is a modern digital services company that works across government, partnering with our clients to improve the health and lives of millions of Americans, ensure the security of all Americans—from soldiers and veterans to kids and the elderly, and defend national interests on the battlefield. Our engineers, designers, and strategists cut...

  • Radio Technician

    6 days ago

    Los Angeles, CA, United States SOFTHQ Full time

    Radio Unit TechnicianLocation: Los Angeles, CAGENERAL· The Los Angeles Unified School District seeks qualified proposers to provide a Radio Unit Technician for the Information Technology Services. LAUSD intends to use the results of this solicitation process to award a work order to the responsive and responsible proposer.REQUIREMENTS· Must be able to read...

  • Engineer Radio Frequency Microwave Design 3

    3 weeks ago

    Baltimore, MD, United States Ronin Staffing Full time

    Title: Engineer Radio Frequency Microwave Design 3 Pay Rate: $49.98 - $64.62/hr (negotiable) Location: Baltimore, MD 21240 Length: 12 months contract + extension and conversion Description: The successful candidate will have a working knowledge of RF theory and concepts; and a working knowledge of digital circuit design. They will have analytical skills...

  • Radio Technician

    6 days ago

    Morristown, NJ, United States NextGen Federal Systems Full time

    NextGen Federal Systems, LLC (NextGen) is seeking a Radio Technician to provide hands-on radio and electronics equipment support for the Department of Justice (DOJ) United States Marshals Service (USMS) Tactical Operations Division (TOD), Office Of Strategic Technology Tactical Communication Program.Primary Work Location: Morristown, New JerseyNextGen offers...

  • Radio Frequency Optimization Engineer

    7 days ago

    Irving, TX, United States NextGen | GTA: A Kelly Telecom Company Full time

    RF Optimization Engineer - Irving, TexasKey Responsibilities:Perform drive test-based optimization using Actix.Drive 4G/5G optimization for single site tuning and/or cluster-level optimization.5G optimization experience, including Sub6 Optimization, Idle/Connected Mode Optimization, Carrier Aggregation, mmWave Optimization, VONR, NSA, and SA.Multi-Layer...

  • Two-way Radio Technician

    2 days ago

    La Porte, TX, United States Total Safety Full time

    Total Safety is looking for a Communications Technician II to join their safety conscious team! The Communications Technician II provides service and repair for communications equipment which typically includes all aspects of Motorola two-way radio systems. Total Safety is the world's premier provider of integrated safety and compliance services and the...

  • Electronic Technician 1

    3 weeks ago

    Draper, UT, United States PacifiCorp Full time

    Electronic Technician 1 (Local 57) - Draper, Utah - Date: Oct 3, 2024 Location: DRAPER, UT, US, 84020 Company: PacifiCorp Join Our Team! PacifiCorp is seeking customer-centric candidates to grow and sustain our commitment to a culture of customer service excellence, environmental sustainability and diversity, equity and inclusion. Responsibilities ...

  • Radio Field Technician

    6 days ago

    Las Vegas, NV, United States JT4 LLC Full time

    JT4, LLC provides engineering and technical support to multiple western test ranges for the U.SAir Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech IIJT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and...

  • Senior Radio Frequency Design Engineer

    6 days ago

    Chelmsford, MA, United States Insight Global Full time

    Location: Chelmsford, MA 01824 – Hybrid (3 days onsite per week)Position: RF/Microwave Design Engineer 2 Openings: 1 Staff level (7 years experience)Salary$150k1 Principal level (12 years experience)Salary$170k Duration: Perm 25% feeInterview Process2 roundsStart date: ASAP – November 18, 2024Must-Haves:Ability to obtain Secret Clearance Bachelor Degree...

  • Electronics Technician

    4 days ago

    Greenville, SC, United States TEKsystems Full time

    Job Overview:As a Vehicle Radio Installer, you will be responsible for installing and maintaining radio and emergency-related equipment in various types of vehicles to support first responders like the Police department, Fire Department, and hospitals. This role involves working with electrical systems, troubleshooting issues, and ensuring all installations...

  • Electronics Technician

    4 days ago

    Greenville, SC, United States TEKsystems Full time

    Job Overview:As a Vehicle Radio Installer, you will be responsible for installing and maintaining radio and emergency-related equipment in various types of vehicles to support first responders like the Police department, Fire Department, and hospitals. This role involves working with electrical systems, troubleshooting issues, and ensuring all installations...

  • Radio Frequency Application Engineer

    4 days ago

    Los Angeles, CA, United States Oho Group Ltd Full time

    RF Application EngineerA Global RF / Microwave firm are growing their Applications Engineer team. We are looking for someone to apply their technical expertise in microwave theory to address customer challenges in measurement and characterization.Responsibilities:Deliver prompt technical support to customers.Assess functionality and quality of MMC products...