Engineering Technician
3 weeks ago
Position: Electro-Mechanical Engineering Aid
Location: Orlando, FL
Work Arrangement: On-site, 1 year contract with potential to hire
Clearance: Active Secret Clearance with an investigation date within 5 years
Pay: $31.20/hr
Schedule: A minimum of 40 hours per week with occasional overtime required.
Educational Requirements: High school diploma
Job Duties:
- Fulfill requirements for program designs and fabricate equipment that will be used in the development and manufacture of tactical hardware.
- Fabricating electronic, electro-mechanical assemblies (and sub-assemblies) to Engineering drawings. Including the ability to place and solder components on circuit cards and sub-assemblies.
- The fabrication of wiring harnesses will require connector pinning, de-pinning and applying mounting hardware. In addition, these lower-level assemblies are to be built-up into single, or multi-bay cabinet assemblies, for the delivery to Engineering or Manufacturing Production areas.
- Responsible for reading, interpreting, and occasionally correcting engineering drawings/schematics.
- Daily activity would include not only a fast-paced fabrication environment, but it would also include using several computer-based programs that will update job status, Quality Inspections, and Engineering changes.
This position will provide the opportunity for the candidate to work as individual contributor, in a team environment. This would include collaborating with Engineers, and other members of the Fabrication team including other Fabricators, Draftsmen, Procurement, and Quality Inspectors. This position is expected to operate under moderate supervision.
Required Qualifications:
- 3 (+) years of experience in electrical fabrication (cable and harness, SMT board, test equipment, etc.)
- 3 (+) years of experience with the interpretation of engineering drawings, schematics, and test and repair procedures
- 3 (+) years of experience with fabricating electrical test equipment designs from a blueprint of the layout, schematic, bill of material, and engineering practices manual as guidelines.
- Ability to communicate issues with the design and or the process requirements to management and or design engineers.
- Strong knowledge and experience in repairs of electro-mechanical assemblies
- Knowledge of basic avionics and electronics
- Knowledge of troubleshooting and fault isolation of components using general purpose and/or automated test equipment
- Knowledge of automated and/or general-purpose test equipment (oscilloscopes, multi-meters, network analyzers and waveform generators)
- Familiarity with industrial standards, military specifications, and industry processes
- Excellent written and verbal communication skills
- Ability to lift 35 pounds.
- Ability to adapt to dynamic and frequently changing customer requirements
- Ability to understand policies and procedures for the control of Government property
- Ability to work with hazardous materials
- Ability to properly safety wire assemblies and connectors
- Ability to solder and repair cables and harnesses
Desired Skills
- Knowledge of solder certification to J-STD-001, IPC-7711/IPC-7721
- Knowledge of fault isolation for electro-mechanical components
- Knowledge of concepts for hardware repair
- Experience with CCA component rework and repair
- Rework experience with BGAs and electrical maintenance and rework
-
Aerospace Engineering Technician
3 weeks ago
Santa Barbara, CA, United States OSI Engineering Full timeJoin a global automotive leader as a Lab Fabrication Technician dedicated to revolutionizing mobility by fostering innovative teams aimed at pushing the boundaries in new frontiers. This role involves extensive hands-on technical work, being an integral part of the team of an ongoing R&D program in aircraft assembly, installation, inspection, and repair. As...
-
Engineering Hardware Technician
3 weeks ago
Morton, IL, United States Manpower Engineering Full timeOur client, an electronics components manufacturer, is seeking an Engineering Hardware Technician- to join their team. As an Engineering Hardware Technician, you will be part of the Sensors Team supporting Manufacturing. The ideal candidate will have strong experience in testing, validation, check-out, modification, fabrication, data gathering, reporting and...
-
Engineering Technicians
2 months ago
Springfield, OH, United States CTL Engineering Full timeWe're hiring Engineering Technicians - Construction Inspectors (buildings) - all experience levels! CTL Engineering () is an award winning, full service consulting engineering firm with (15) locations across OH, IN, WV, KY, NC, SC, and VA with a rich history over our (97) years in business. We provide civil/site design and land surveying,...
-
Electrical Engineer
4 weeks ago
Georgetown, KY, United States Manpower Engineering Full timeJob purpose Reporting to the Director of Engineering, the Electrical Engineer is responsible for evaluating current processes, recommending, and implementing process changes and supporting our continuous improvement and lean manufacturing efforts. Duties and responsibilities • Evaluates electrical systems and equipment and troubleshoot machines along...
-
Electrical Engineer
3 weeks ago
Georgetown, KY, United States Manpower Engineering Full timeJob purpose Reporting to the Director of Engineering, the Electrical Engineer is responsible for evaluating current processes, recommending, and implementing process changes and supporting our continuous improvement and lean manufacturing efforts. Duties and responsibilities • Evaluates electrical systems and equipment and troubleshoot machines along...
-
Engineering Technician
3 weeks ago
Tallahassee, FL, United States NOVA Engineering and Environmental, LLC Full timeNOVA Engineering is seeking full-time a Construction Materials Testing (CMT) Field Technician in our Tallahassee, FL office.The individual will be responsible for the following:Field testing of soil, concrete, asphalt, aggregate, and masonry mortar/grout for compliance with ASTM, AASHTO, DOT, and/or project specifications;Review of blueprints in preparation...
-
Engineering Technician
3 weeks ago
Pensacola, FL, United States Naval Facilities Engineering Systems Command (NAVFAC) Full timeAt Naval Facilities Engineering Systems Command Southeast (NAVFAC SE), we look for service-oriented people who embrace diversity, learning, and adventure! Our NAVFAC SE family is always “Building towards Something Better”. Whether it’s a better work culture, a better environment, or a better future, we aim for greatness!** Salary is adjusted based on...
-
Senior Engineering Technician
3 weeks ago
Panama City Beach, FL, United States NOVA Engineering and Environmental, LLC Full timeNOVA Engineering is seeking a Senior Construction Materials Technician/ICC Inspector i(CTQP) n our Panama City Beach, FL office. We are looking for a self-motivated individual with a positive attitude and a strong work ethic.Primary duties performing structural building inspections and QA/QC tests (soils, masonry, reinforced concrete, structural steel,...
-
RF Product Engineer
4 weeks ago
Solon, OH, United States Manpower Engineering Full timeResponsibilities: 1. Establish and implement product design and manufacturing changes for cost reduction and improved product performance. 2. Improve product yields of legacy products through redesign and part specification efforts. 3. Resolve product performance issues as a result of design or component limitations. 4. Work with Test Engineering with the...
-
Survey Office CAD Technician
3 weeks ago
Jacksonville, FL, United States Alliant Engineering, Inc. Full timeAbout Us:Recently named as one of Northeast Florida’s Top Places to Work, Alliant Engineering, an employee-owned company, is a growing engineering, planning, landscape architecture, and surveying firm with a strong culture of quality, delivery, and innovation. Our employee owners are driven by a commitment to build better communities with excellence and...
-
Technician FL
5 days ago
Orlando, FL, United States Butler Aerospace and Defense Full timeTechnician Location: Orlando, FL Job ID: #70145 Pay Range: $22-26 Clearance: Active Secret. Must have at least an Interim Secret clearance to start - current Final Secret clearance preferred. Job DescriptionPerforms a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.Constructs, troubleshoots, calibrates, adjusts,...
-
Surveyor Technician
3 weeks ago
Iron Mountain, MI, United States Coleman Engineering Co Full timeSURVEYOR TECHNICIAN Coleman Engineering is hiring for a Surveyor Technician in our Green Bay, WI office to assist the Project Surveyor with various tasks while working in the field. The candidate must possess excellent follow through skills, be attentive to detail, work well with others, and be able to communicate effectively with clients and coworkers....
-
Electronics Engineering Technician
7 days ago
Boca Raton, FL, United States Johnson Controls Full timeWhat You Will DoThe Engineering Team at Johnson Controls is responsible for a vast array of products with a multitude of configurations. This Electrical Engineer Technician position is for a self-motivated individual that will contribute to new product development as well as existing product sustaining efforts. Prototyping, building, debugging,...
-
Senior Roadway Engineer
3 weeks ago
Orlando, FL, United States PTS Advance Full timeMy Client, an award-winning ENR Top 500 Design Firm is looking for a Senior Roadway Engineer to join their busy Orlando team. As a Senior Roadway Engineer, your responsibilities will include:Analyze and prepare roadway and Temporary Traffic Control Plans (TTCP) designs, calculations and drawings for Expressway/Limited-Access facilities and Arterial/Local...
-
Surveyor Technician
3 weeks ago
Iron Mountain, MI, United States Coleman Engineering Co Full timeSURVEYOR TECHNICIAN Coleman Engineering is hiring for a Surveyor Technician in our Green Bay, WI office to assist the Project Surveyor with various tasks while working in the field. The candidate must possess excellent follow through skills, be attentive to detail, work well with others, and be able to communicate effectively with clients and coworkers....
-
Surveyor Technician
3 weeks ago
Iron Mountain, MI, United States Coleman Engineering Co Full timeSURVEYOR TECHNICIAN Coleman Engineering is hiring for a Surveyor Technician in our Green Bay, WI office to assist the Project Surveyor with various tasks while working in the field. The candidate must possess excellent follow through skills, be attentive to detail, work well with others, and be able to communicate effectively with clients and coworkers....
-
Senior Controls Engineer
3 weeks ago
Arlington, VA, United States TAI Engineering Full timeLooking for variety and technical challenges? We're searching for a forward-thinking and client facing Senior Controls Engineer/PM to support the operation and maintenance of Distributed Control Systems within a mission critical facility in Arlington, VA. This is no ordinary engineering role – you'll be actively managing projects at a facility that is on...
-
Electronic Technician
4 weeks ago
Mebane, NC, United States Manpower Engineering Full timeOur client is seeking a direct hire Electronic Technician to join their team. In this role, you will use your experience and background to maintain and optimize manufacturing operations. Job Title: Electronic Technician Location: Mebane, NC What's the Job? Install, maintain, and enhance electronic components and systems on our advanced high-speed...
-
Electronic Technician
3 months ago
Mebane, NC, United States Manpower Engineering Full timeOur client is seeking a direct hire Electronic Technician to join their team. In this role, you will use your experience and background to maintain and optimize manufacturing operations. Job Title: Electronic Technician Location: Mebane, NC What’s the Job? Install, maintain, and enhance electronic components and systems on our advanced...
-
Space Vehicle Engineering Technician
6 days ago
Palm Bay, FL, United States L3Harris Technologies Full timeJob Title: Space Vehicle Engineering Technician Job Code: 18326 Job Location: Palm Bay, Florida Job Description: For decades, L3Harris has been an innovator in space domain technology designing and producing trusted space communications and imaging payloads and satellite systems. L3Harris is seeking a motivated and experienced Space Vehicle Assembly,...