Manufacturing Engineer

2 months ago

Byron Center, United States Steelcase Full time
Description We are hiring Associate to Sr. Manufacturing Engineer to lead and provide ongoing support through our manufacturing life cycle
What You Will Be Doing: With general direction, will lead the introduction of new products into the facility, improve productivity and profitability of existing production procedures, and provide ongoing support through the manufacturing life cycle. Acts as a technical expert in process technology
Improvements: Independently, with innovation and creativity, evaluates manufacturing processes to ensure optimal labor and material costs to increase productivity and profitability. Through justifications and evaluations, identifies prime areas for improvement. Tracks expenditures to ensure outlays are within budgeted amounts. Identifies, reduces, and eliminates worker exposure(s) to ergonomic stress(es) in the work place.
Floor Support: Provides timely product and process support for any manufacturing area to diagnose problems and implement solutions to minimize interruptions to production.
Special Projects: Leads the implementation of significant product, process, or other corporate change initiatives being introduced into the plant.
Strategic/Manufacturing Planning: Provides advanced research to introduce/integrate new processes, equipment, and technologies into the company
Your future team:   You will be part of large and collaborative operations network at Steelcase.
Who You Are: Preferred Skills and Competencies
  • Very strong analysis skills: process, capacity, cost/benefit, waste stream, and quality tools.
  • Internal and external quality support/management
  • Knowledge in lean manufacturing techniques: flow, PQ, equipment reliability, and set up reduction.
  • Facilitation and negotiation skills
  • Knowledge of material handling
  • Productivity improvement techniques: RCI’s
  • Behavior sciences (logic, sociology, etc.)
  • Economics and financial analysis
  • Work measurement
  • Interpersonal skills
  • Computer skills; advanced level required to utilize Excel and Access programs
  • Experience in design, specification, purchase, and installation of new equipment
  • Experience in the Engineering Design Process
  • Knowledge of simulation, process modeling, and value stream mapping
  • Project management and leadership ability
  • Occupational Bio Mechanics/Human Factors Engineering
  • Strategic planning
Required Skills and Competencies
  • 4 year technical degree or equivalent education 
Who We Are: 
Steelcase is a global design and thought leader in the world of work. Along with our expansive community of brands, we design and manufacture innovative furnishings and solutions to help people do their best work in the many places where work happens. 
Why People Choose to Work with Us:   
At Steelcase, we put people at the center of everything we do. We understand the role of work and believe that it can bring meaning and purpose to the lives of our customers and our employees. We prioritize supporting our employees both in and out of work, in all aspects of their lives. When we bring our talents together, we make a positive lasting impact through our work and communities.    
Our employees balance two key principles: 
We expect the office to be our primary place of work because that’s where we gather to learn, teach, innovate, and host our clients. Being present together builds communities of belonging, enables strong teams, and helps us make meaningful progress. 
We also believe in giving people choice and control – over how, when and where they work to achieve commitments and deliver results, along with their wellbeing and personal needs. We trust employees to orchestrate their time and presence to best accomplish work, and what that looks like may change from day to day. 
 Levels of flexibility vary by role and team, and employees and their leader need to align on expectations of flexibility.  Together we can help the world work better. 
 What Matters to Us: 
More than qualifications, we’re looking for talent and potential. We are proud to have a diverse and inclusive workforce, and we're always looking to improve our global community. We value applicants who are comfortable interacting with people different from themselves, building mutual respect and positive relationships. We invite people from all backgrounds and genders to apply. If we can make the application process easier through accommodation, please email us at myhr@steelcase.com.   
Steelcase provides employment opportunities to all qualified employees and applicants without regard to race, color, creed, genetic information, religion, national origin, gender, sexual orientation, gender identity and expression, age, disability, or veteran status and bases all employment decisions only on valid job requirements. We are proud to be recognized for our inclusive workforce by the Corporate Equality Index for the past nine years.  
We are an MVAA silver level employer. Veterans and Veteran Spouses are encouraged to apply. 
If you’re interested in Steelcase, but this isn’t the right time or role, join our Talent Community to be updated on future openings in your area(s) of expertise.  

  • Manufacturing Engineer

    6 days ago

    Byron Center, United States Steelcase Full time

    Job Description Description We are hiring Associate to Sr. Manufacturing Engineer to lead and provide ongoing support through our manufacturing life cycle!What You Will Be Doing:With general direction, will lead the introduction of new products into the facility, improve productivity and profitability of existing production procedures, and provide...

  • Lead Manufacturing Engineer

    2 weeks ago

    Elma Center, New York, United States VIR Consultants Inc Full time

    Position OverviewJob Title: Lead Manufacturing EngineerLocation: Elma Center, New YorkJob Type: Full TimeRole SummaryVIR Consultants Inc is on the lookout for a Lead Manufacturing Engineer to play a pivotal role in enhancing the Prismatic Manufacturing Group. This position focuses on the innovation of manufacturing processes for new products and the...

  • Manufacturing Engineer

    1 month ago

    Kennedy Space Center, United States Axient LLC Full time

    Check out this NEW Opportunity with Axient!: Axient is searching for candidates for a full-time Manufacturing Engineer in the Merritt Island, FL area. The position supports the USSF Space Systems Command Launch Assured Access to Space Launch Acquisition Directorate (SSC/AAL). The candidate will support manufacturing engineering responsibilities and...

  • Lead Manufacturing Engineer

    2 weeks ago

    Richland Center, Wisconsin, United States Schreiber Foods Full time

    Job Category: EngineeringJob Family: Operations EngineeringJob Overview: We are looking for an experienced Senior Manufacturing Engineer to enhance our innovative team. In this role, you will be instrumental in refining our production methodologies, ensuring the effective and economical manufacturing of our food items. Your collaboration with various...

  • Manufacturing Systems Engineer

    2 weeks ago

    Sioux Center, United States AllSearch Professional Staffing Inc Full time

    Position Overview:We are currently seeking a skilled Manufacturing Engineer to become a vital part of our client's operations. This role involves leading the design and execution of manufacturing systems and processes.Key Responsibilities:- Serve as the primary liaison between the production team and engineering department, facilitating effective...

  • Lead Manufacturing Engineer

    2 weeks ago

    Richland Center, Wisconsin, United States Schreiber Foods Full time

    Job Category: EngineeringJob Family: Operations EngineeringJob Overview: We are looking for an experienced Senior Manufacturing Engineer to enhance our innovative team. In this role at Schreiber Foods, you will be instrumental in refining our production methodologies, ensuring the effective and economical manufacturing of our food products. Your...

  • Manufacturing Engineering Manager

    3 months ago

    Center Line, United States Sodecia Full time

    Job DescriptionJob DescriptionResponsibilities & Duties • Manage and respond for the administration of engineering processes, ensuring the efficient use of resources in order to meet through robust processes focused on safety, quality and productivity at the lowest possible cost.• Manage, plan and monitor the development of new processes and improvement...

  • Manufacturing Engineering Manager

    3 months ago

    Center Line, United States Sodecia Full time

    Job DescriptionJob DescriptionResponsibilities & Duties • Manage and respond for the administration of engineering processes, ensuring the efficient use of resources in order to meet through robust processes focused on safety, quality and productivity at the lowest possible cost.• Manage, plan and monitor the development of new processes and improvement...

  • Manufacturing Engineering Lead

    2 weeks ago

    Kennedy Space Center, United States Revology Cars LLC Full time

    Revology Cars LLC is seeking a Manufacturing Engineering Manager to oversee operations at our facility dedicated to crafting Ford-licensed reproduction vehicles. ABOUT REVOLUTIONARY AUTOMOTIVE MANUFACTURINGWe are pioneers in the automotive industry, being the first licensed by Ford Motor Company to produce new reproduction vehicles.As a leader in the market,...

  • Engineering Manager for Manufacturing Operations

    2 weeks ago

    Center Line, Michigan, United States Sodecia Full time

    Job OverviewAs an Engineering Manager in Manufacturing, you will oversee and optimize engineering processes to ensure resource efficiency while maintaining a strong focus on safety, quality, and productivity at minimal costs.Key ResponsibilitiesProcess Management:• Administer and enhance engineering processes, ensuring alignment with internal protocols and...

  • Manufacturing Engineering Manager

    4 weeks ago

    Kennedy Space Center, United States Revology Cars LLC Full time

    Revology Cars is hiring a Manufacturing Engineering Manager at the Orlando, Florida facility where we build 1965-1968 Ford® Mustang® and Shelby® GT new licensed reproduction rolling chassis and restored original automobiles. ABOUT REVOLOGY CARS Revology Cars is the first company licensed by Ford Motor Company to build 1965-1968 Ford® Mustang® and...

  • Lean Manufacturing Engineer

    1 month ago

    Wilton Center, United States YER USA Full time

    YER USA is proud to collaborate with ASML in Wilton, CT for the recruitment of 3 Lean Manufacturing Engineers with a continuous improvement background. These are hybrid positions in Wilton, CT. ASML offer a generous base salary, full benefits, annual bonus and relocation assistance. As a Lean Change agent you will help drive the Lean transformation within...

  • Engineering Manager for Manufacturing Operations

    2 weeks ago

    Kennedy Space Center, United States Revology Cars LLC Full time

    Revology Cars LLC is seeking a Manufacturing Engineering Manager to oversee operations at our facility dedicated to the production of Ford-licensed reproduction vehicles.ABOUT REVOLOGY CARSWe proudly hold the distinction of being the first company licensed by Ford Motor Company to manufacture new reproduction Ford automobiles, including the iconic 1960s...

  • Controls Engineer

    1 week ago

    Platte Center, United States Judge Direct Placement Full time

    Large metal parts company is looking for a Controls Engineer for their facility in central NebraskaCandidates must have Allen Bradley PLC programming experienceRelocation assistance is available (this company does not sponsor or relocate candidates from outside of the US)***CANDIDATES MUST HAVE MANUFACTURING OR DISTRIBUTION INDUSTRY EXPERIENCEDescription ~To...

  • Engineering Manager for Manufacturing Operations

    2 weeks ago

    Kennedy Space Center, United States Revology Cars LLC Full time

    Revology Cars LLC is seeking a Manufacturing Engineering Manager to oversee operations at our facility dedicated to the production of licensed Ford vehicles. ABOUT REVOLUTIONARY AUTOMOTIVE MANUFACTURINGWe are the pioneering firm authorized by Ford Motor Company to manufacture new reproduction Ford vehicles, including the iconic 1960s Mustang.As the foremost...

  • Engineering Manager for Manufacturing Operations

    2 weeks ago

    Kennedy Space Center, United States Revology Cars LLC Full time

    Company Overview:Revology Cars LLC specializes in the production of licensed Ford Mustang and Shelby GT reproduction rolling chassis, along with the restoration of original automobiles. As a pioneer in this niche, we are recognized as the first company licensed by Ford Motor Company to undertake such manufacturing.Position Summary:The Engineering Manager for...

  • Manufacturing Engineer II

    6 days ago

    Kennedy Space Center, United States University of Central Florida Full time

    About the RoleThe University of Central Florida is seeking a highly skilled CNC Machine Technician II to join our team in the Office of Research - Operations. As a key member of our machine shop team, you will be responsible for operating and maintaining complex machine tools, providing design and fabrication services to support research and instructional...

  • Sr. Manufacturing Design Engineer

    2 months ago

    Kennedy Space Center, United States Brambles Full time

    CHEP helps move more goods to more people, in more places than any other organization on earth via our 300 million pallets, crates and containers. We employ 11,000 people and operate in more than 55 countries. Through our pioneering and sustainable share-and-reuse business model, the world's biggest brands trust us to help them transport their goods more...

  • Engineering and Maintenance Leadership

    2 weeks ago

    Byron, Georgia, United States Pactiv Evergreen Full time

    Overview: Pactiv Evergreen Inc is a prominent manufacturer and distributor specializing in fresh foodservice and food merchandising products, as well as fresh beverage cartons across North America and select international markets. Our products cater to a diverse clientele, including full-service and quick-service restaurants, foodservice distributors,...

  • Welder - Manufacturing Specialist

    1 week ago

    Byron, Illinois, United States Hire Military Talent Full time

    Job OverviewWe are seeking a skilled Welding Technician to join our dynamic team at Hire Military Talent. As a Welding Technician, you will play a critical role in ensuring the quality and safety of our manufacturing processes.Key Responsibilities:Perform welding tasks using various techniques, including MIG, TIG, and arc welding, to join metal components...