Field Engineering Technician

1 month ago

Concord NH United States Leidos Full time

Description

Leidos is seeking Field Engineering Technicians to provide field inspections of utility poles throughout the Northern New Hampshire region. This role is remote, but the candidate MUST live in the New Hampshire area.

Field Engineering Tech Responsibilities:

The successful candidate will travel around New Hampshire to collect data, field measurements, and photos of utility poles. These poles have maintenance concerns identified by our client in which our field engineers will document these concerns and collect the necessary data for Leidos designers to design their solutions and fixes. In general, travel will be limited on most weeks, but overnight stays are occasionally required depending on the workload. Technicians are expected to meet the goals / expectations set on a weekly basis by their boss and communicate their status / progress effectively.

  • Significant walking is required; 95% of this position requires field related work. Candidate will be required to be outside year-round and every week as weather and personal safety permit and could be subject to inspection of poles in the following areas; urban, rural, backyard pole lines, private properties, and Transmission and Distribution Right of Ways.
  • Work locations assigned vary monthly and could be as far east as Albany and as far west as Buffalo. If the work locations are long distances from the candidate’s home, hotels can be provided (including per diem supplements for meals generally between $50-$70 dependent on work location).
  • Candidate can either drive their own personal vehicle with a mileage reimbursement ($0.625/mi) or each week they can get a rental truck/SUV paid for by Leidos
  • Candidate will receive 16 to 24 hours of training with an experienced field engineer prior to working alone. Hours are flexible based on need dates of inspections. Candidate will be responsible for following Leidos safety procedures and reporting progress daily.

Additional benefits that Field Engineering Technicians can look forward to:

  • Flexible Work Hours. Many Technicians opt to work 10 hour days and take 2-3 extra days off each week
  • Per-Diem supplements between $50-$70 for meals while staying overnight in hotels

Field Engineering Tech qualifications:

  • High School diploma minimum requirement
  • Preferred candidate would possess experience within the power distribution field and/or an AS/BS in engineering (or related STEM Field)
  • The ideal candidate has prior experience doing field work and distribution component identification.
  • Candidates must be able to work in both team and independent environments and to organize work to meet deadlines
  • Must be local to the area.
  • Knowledge of NESC Standards and Client Standards is helpful. 
  • Proficiency in MS Office (Word, Excel, Outlook, etc.) required 
  • Excellent verbal and written communications skills 
  • Willingness to perform both field and office work. 
  • Ability to work long days in outdoor environments 
  • Valid Driver’s License and ability to utilize cell phone and 8MP camera

Successful candidates can look forward to a fast paced, diverse work environment & flexible work hours/work arrangements as well as managers who will encourage career development and growth.

  • Engineer in Training Certificate (EIT)
  • Professional Engineer License (PE)
  • Project Management Professional (PMP)
  • Leadership training
  • Management opportunities

In this role, you can also expect to gain:

  • NESC expertise
  • Structural Pole Modeling
  • Electrical Power Calculations
  • GIS design training
  • Project management
  • Financial management

Leidos is a trusted and future-focused solutions provider. Utilities consistently come to Leidos for reliable power expertise, as reflected through our work with more than 50 investor-owned utilities and more than 160 municipals/cooperatives across the country as well as a growing number of local utility providers and private developers. Our project portfolio includes large energy projects for electric utilities, power generation owners, and industrial clients.

In addition, Leidos works with an established group of industry-leading construction partners delivering meaningful energy delivery solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within: the Top 10 T&D Firms, Top 10 Program Management Firms, and Top 20 Power Firms.

PowerDelivery

PDSDLINE

Original Posting Date:2024-03-28

While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.

Pay Range:Pay Range $31,850.00 - $57,575.00

The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

#Remote

  • Engineering Technician

    2 days ago

    Concord, United States Northpoint Engineering, LLC Full time

    Job DescriptionJob DescriptionNorthpoint Engineering, LLC is a leading engineering firm that specializes in providing innovative solutions for a variety of industries. With a team of highly skilled engineers, we help our clients improve their efficiency, productivity, and profitability. We are dedicated to delivering exceptional services and building...

  • Field Service Technician

    7 days ago

    Concord, NH, United States Food Management Search Full time

    Job Title: Field Service Technician Location: Concord, New Hampshire Salary: $65-75K plus bonus Job Summary of the Field Service Technician: We are looking for a Field Service Technician who is self-directed, at ease dealing directly with the customer, can write technical reports, and make and assist the Engineering team with product improvement...

  • Field Service Engineer

    1 month ago

    Concord, United States Sterling Engineering Inc. Full time

    Job DescriptionJob DescriptionService Engineer/Machine BuilderLocation: Concord, NCEmployment Type: Contract to Hire or Direct HirePay Range: $30 - $40 per hour (depending on experience)Company Overview:Join a dynamic and innovative team at Sterling Engineering, a leader in high-speed packaging solutions. We are looking for talented Service Engineers/Machine...

  • Field Service Technician

    3 days ago

    Concord, United States Food Management Search Full time

    Job Title: Field Service Technician Location: Concord, New Hampshire Salary: $65-75K plus bonus Job Summary of the Field Service Technician: We are looking for a Field Service Technician who is self-directed, at ease dealing directly with the customer, can write technical reports, and make and assist the Engineering team with product improvement...

  • Field Service Technician

    2 weeks ago

    Concord, United States Job Juncture Full time

    Job DescriptionJob Title: Field Service TechnicianLocation: Concord, New HampshireSalary: $65-75K plus bonus  Job Summary of the Field Service Technician:   We are looking for a Field Service Technician who is self-directed, at ease dealing directly with the customer, can write technical reports, and make and assist the Engineering team with product...

  • Electronics Technician

    11 hours ago

    Shoreview, MN, United States Senior Electronics Technician Full time

    IMPORTANT NOTICE: This job opening is specifically for the position of Senior Electronics Technician, focusing on equipment repair, maintenance, and calibration. It is crucial to highlight that this role does NOT involve responsibilities related to computer science or information technology (IT). The Senior Electronics Technician we are seeking will take the...

  • FIELD TECHNICIAN

    2 weeks ago

    Altamonte Springs, FL, United States PPM Consultants, Inc Full time

    Job Title Field TechnicianJob Type Full-timeCareer Level Entry LevelEducation BS or MS in civil or environmental engineering, environmental science or geologyLocation Orlando - Altamonte Springs, FL 32701 US (Primary)Category TechniciansJob Description PPM Consultants, Inc. (PPM), is seeking candidates for a full-time position as an Environmental...

  • Field Service Technician

    6 days ago

    Kingsport, TN, United States McCoy Construction & Forestry Full time

    McCoy Construction and Forestry is looking for Field Service Technicians in our Kingsport, TN dealership. Field Service Technicians are responsible for repairing and maintaining electric, diesel and gasoline industrial, construction and forestry equipment.Field Service Technician Requirements:2-3 years construction and forestry experience requiredAbility to...

  • Field Engineer

    1 day ago

    Concord, United States Flatiron Construction Full time

    Join the Flatiron Construction team in California now! As an experienced Field Engineer, you have the opportunity to make a meaningful contribution to significant infrastructure projects. You will be responsible for supervising construction, maintaining quality standards, and collaborating closely with other teams. Act now and unleash your full potential!...

  • Resident Field Technician

    2 days ago

    Concord, United States Pape Material Handling Inc Full time

    Job DescriptionJob DescriptionPAPE’ MATERIAL HANDLING, INC. – SANTA ROSA, CA RESIDENT FIELD TECHNICIAN:Do you love working on equipment and turning wrenches? Are you looking to grow your skills as a mechanic? Are you looking for not just another job, but a career? Pape’ Material Handling, the premier capital equipment dealer in the West, is seeking a...

  • Field Service Engineer

    4 days ago

    Concord, United States International Search Partners Full time

    Field Service Engineers Key Responsibilities: Plan and coordinate activities related to installing equipment; investigating and resolving customer reports of technical problems with equipment; and eliminating future operational or service difficulties Install new or modified equipment at customer's facility to ensure full functionality according to...

  • Field Service Engineer

    4 weeks ago

    Concord, United States International Search Partners Full time

    Field Service EngineersKey Responsibilities:Plan and coordinate activities related to installing equipment; investigating and resolving customer reports of technical problems with equipment; and eliminating future operational or service difficultiesInstall new or modified equipment at customer's facility to ensure full functionality according to...

  • Civil Engineer

    3 weeks ago

    Concord, United States Daylight Engineering PLLC Full time

    Job DescriptionJob DescriptionDaylight Engineering is a dynamic Civil Engineering firm located in downtown Concord, NC. As part of the team, you will work in a collaborative environment with PE’s and EI’s on a wide range of projects including subdivisions, multi-family, commercial, institutional, and industrial development. This growing firm will provide...

  • Access Control and CCTV Installer

    1 week ago

    Nashville, TN, United States Next Level Technician Full time

    *Next Level Technician* is seeking *Access Control and CCTV Technicians* in the *Nashville, TN *area. Candidates that are highly motivated and ready to work in a hands-on environment are encouraged to explore this opportunity!*Our technicians work primarily on commercial and industrial jobsites*. From interpreting blueprints to installing voice, data,...

  • Field Service Supervisor

    4 days ago

    Concord, United States Diedre Moire Full time

    Field Service Manager - CNC Machining Centers - Concord, NC Seeking a Regional Customer Service Manager to oversee activities of field service technicians and installation teams and develop and maintain the highest standard of customer relationships. Must have 3+ year...

  • Engineering Technician

    2 weeks ago

    Sewickley, PA, United States Oxford Solutions, Inc Full time

    Direct hire opening with our client for an Engineering Technician. Looking for someone with 1 to 5+ years of experience in preparing civil/site development and construction plans. Pay will be based on experience level.ResponsibilitiesPrepare civil/site development and construction plans utilizing Autodesk Civil 3D.Design and analyze piping networks for...

  • Geotechnical Project Engineer

    1 day ago

    Concord, United States Cyfle Full time

    About the job Geotechnical Project Engineer Salary: $ 92,500.00 We have partnered with a Engineering and Consulting Firm in the Concord, NH area to provide them with a Geotechnical Project Engineer. Please review the below description and let us know if you are interested. Prioritized Must Have Skills for the Geotechnical Project Engineer: #1 Bachelor of...

  • Resident Field Technician

    4 days ago

    Moab, UT, United States Wheeler Machinery Co. Full time

    Wheeler Machinery Co. is seeking to hire a Nightshift Field Service Technician to perform equipment repairs in the Moab, UT location. (Lisbon Valley Mine) Full-time benefited position.Will be responsible for performing accurate troubleshooting & diagnosing, timely repairs, and component installation on all models of Caterpillar equipment. This opening will...

  • Field Engineer

    1 week ago

    , OH, United States Bi-Con Services Full time

    Overview:The field engineer is responsible for the overall material management and field documentation for the jobsite. This position requires 100% travel to our varies jobsite locations (Ohio, West Virginia, Pennsylvania, North Carolina, Virginia, Etc.), working a 10/4 schedule rotation.**Bi-Con Services employees working in safety-sensitive positions are...

  • Field Service Technician

    7 days ago

    Lee's Summit, MO, United States JCI Full time

    JCI Industries is looking for a *Field Service Technician 2 *to join our team in *Lee’s Summit, MO*. As a *Field Service Technician*, you will be responsible for maintenance/preventative maintenance/electrical and millwright-type functions. This includes rotating equipment assembly/disassembly, basic equipment maintenance, rotating equipment alignments,...