SUPERVISORY ENGINEER with Security Clearance

Summary You will serve as a Supervisory Engineer in the Engineering Support Department at Naval Undersea Warfare Center, Division Keyport, WA (NAVSEALOGCENKYPTDIVNUWC MECH PA) in Mechanicsburg, PA
Duties
• You will manage a team responsible for reliability engineering/Readiness Based Sparing (RBS) modeling.
• You will ensure validation of RBS models prior submission to the Maritime Allowance Readiness Based Sparing Re-provisioning and Change review Board (MARRC-RB).
• You will assist in the development of the agenda for Maritime Allowance Readiness Based Sparing Re-provisioning and Change review Board meetings.
• You will facilitate Readiness Based Sparing related discussion during Maritime Allowance Readiness Based Sparing Re-provisioning and Change review Board meetings.
• You will organize, plan, assign and direct new and on-going work.
• You will set objectives for and evaluates subordinate's work.
• You will establish goals and priorities within project and other parameters.
• You will prepare written plans and reports and to make presentations to interested parties on program/project status, problems, milestones, scheduling, cost, etcetera.
• You will formulate approaches to resolve technical issues, reviews proposals for work, and decides on controversial proposals and issue.
• You will support the development of Naval Innovative Science and Engineering (NISE) project proposals, as well as the execution and management of Naval Innovative Science and Engineering projects.
• You will recruit, staff, and develop personnel for reliability engineering/Readiness Based Sparing (RBS) modeling.
• You will manage a product line business plan, forecast workload, and identify resource requirements, develop and manage budgets and operational plans of action, establish and adjust priorities, and monitor status.
• You will ensure employee compliance with all Command policies and instructions.
• You will perform administrative functions including timekeeping, managing leave, overtime and compensatory time, Defense Travel System travel management, telework management, Individual Development Plan management, and performance management.
• You will conduct succession planning to include mentoring/coaching, employee cross training, process documentation, such as, desk guides and Standard Operating Procedures (SOPs), etc.
• You will ensure workforce is educated and aligned with the Naval Sea System Command (NAVSEA) Campaign Plan/Strategic Vision, as well as the Command Mission/Vision/Guiding Principles.
• You will maintain System Authorization Access Request Navy management, records, Enterprise Safety Application Management System safety program management, and training management, to include Defense Acquisition Workforce Improvement Act continuous
Requirements Conditions of Employment
• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check
To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level
This requirement is called time-in-grade
Time-in-grade requirements must be met by the closing date of this announcement.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• This is a bargaining unit position.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty
Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA)
Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites
You must be able to travel on military and commercial aircraft for extended periods of time.
• Supervisors in the executive branch have a heightened personal responsibility for advancing government ethics
You will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101
Qualifications Your resume must demonstrate at least one year of specialized experience at or equivalent to the ND-03 grade level or pay band (GS-9/11 grade level equivalency) in the Federal service or equivalent experience in the private or public sector
Specialized experience must demonstrate the following: supporting and engineering team in project management lifecycle, by performing project financial management and task planning to support the commands mission
Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social)
Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment
Education Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree
To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics
Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position
OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico
Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U
S
Office of Personnel Management
For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html
OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above)
The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance
Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions
Additional information This position is covered by the Department of Defense Priority Placement Program
Additional vacancies may be filled by this announcement
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants
Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ)
A BQ military spouse possesses knowledge, skills, abilities, and competencies comp

---