SUPERVISORY INTERDISCIPLINARY GENERAL ENGINEER/ARCHITECT with Security Clearance

Summary This is a public notice flyer to notify interested applicants of anticipated vacancies
Applications will not be accepted through this flyer
Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered
There may or may not be actual vacancies filled from this flyer
Notice of Result letters will not be sent to applicants who respond to this flyer
Duties
• You will provide technical support in the areas of project planning, design management, contract administration, funding management, Military Construction, and special project programs.
• You will investigate existing problem areas in order to forecast future project facilities planning.
• You will review plans, designs, and sketches to ensure they conform within Navy and DoD guidance, A and E contracts for various complex and unusually difficult projects for preliminary as well as final design purposes.
• You will evaluate technical aspects of development and design work accomplished by the design division.
• You will perform basic architectural and/or engineering studies and investigations to determine the most economical methods of fulfilling a program requirement.
• You will analyze engineering design modifications for technical safety or operational validity.
• You will maintain balanced workloads by shifting work assignments, subordinate workers, or other resources to achieve the most effective work operations
Requirements Conditions of Employment
• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check
To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• Supervisors in the executive branch have a heightened personal responsibility for advancing government ethics
You will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101.
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites
You must be able to travel on military and commercial aircraft for extended periods of time.
• Current registration as a professional Architect or Professional Engineer is required
Registration must be in a U.S
state or U.S
territory.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA)
Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty
Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal
Qualifications This position has a selective placement factor that will be used to screen out ineligible candidates
Selective Placement Factor (SPF): This position has an SPF which is current registration as a Professional Engineer (PE) or Architect (RA) in any state, District of Columbia, Guam or Puerto Rico
In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector
Specialized experience must demonstrate the following: 1) Planning, designing, and sketching overall solutions for architectural and engineering features of various complex and unusually difficult projects for preliminary as well as final design purposes; 2) Providing advice and recommendations concerning general architectural and engineering methods and systems as necessary to develop and coordinate projects for design, repair, alteration, rehabilitation, installation, improvement or demolition; 3) Planning and participating in studies and research to improve standards and criteria applicable to architectural and/or engineering features of systems, materials and equipment; 4) Performing basic architectural and/or engineering studies and investigations to determine the most economical methods of fulfilling a program requirement; and 5) Supervising/leading multi-disciplined engineers, architects, and designers engaged in providing engineering and design services to assure project dates are met
NOTE: This information must be fully supported in your resume
Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF and https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf and https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social)
Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment
Education For the GS-0801 Engineering Series applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree
To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics
Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico
Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U
S
Office of Personnel Management
For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above)
The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above).
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance
Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions
For the GS-0808, Professional Architecture Series applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a bachelor's or higher degree in architecture.
OR
Successful completion of bachelor's or higher degree in a field related to architecture that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environ

---