INTERDISCIPLINARY COMMUNITY PLANNER/ENGINEER/ARCHITECT with Security Clearance

Duties * You will classify the type of work (construction/renovation) to align with current federal funding regulations. * You will act as a Project Manager and technical expert over the development of project justification and documentation in support of Military Construction Project Data Sheets (DD1391's) for new facilities and major renovations. * You will apply architectural and/or engineering skills in order to produce a wide variety of facility planning products and services for a high-tempo Navy installation. * You will validate facility requirements through investigation and update Facility Planning Documents (FPD's). * You will make recommendations to decision makers based on sound economic analysis. * You will create technical plans for system development, fielding, and sustainment processes. * You will implement planning criteria when managing projects (e.g., Master Plans, Special Planning Studies, Basic Facilities Requirements, Facility Planning Documents, or similar components) to meet requirements. * You will prepare scopes of work, serve on A-E slate and selection boards, and evaluate A-E performances for accuracy, adequacy, completeness, and conformity in order to make suggestions designed to improve the product. Requirements Conditions of Employment * Must be a US Citizen. * Must be determined suitable for federal employment. * Must participate in the direct deposit pay program. * New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov * Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326. * Males born after 12-31-59 must be registered for Selective Service. * You will be required to obtain and maintain a current valid United States driver's license. * You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal. * This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes. * This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time. * You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases. * You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment. * This is a bargaining unit position. Qualifications For the GS-12: In addition to the Basic Requirements for this position, your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-11 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Leading multi-disciplined teams involved with base and asset development; 2) Applying a wide range of facilities engineering theories (i.e. demographics, development trends, local economic conditions, sustainability concepts, economics and cost estimating) to meet mission requirements for compatible land use, encroachment issues, safety considerations, (AT/FP, HERO, AICUZ, EMR, etc.), the NEPA process, cultural resources regulations, the impact of natural resources management and planning and programming procedures; 3) Making recommendations to decision-makers based on sound economic analysis; 4) Utilizing basic proficiency in information technology, such as Geospatial Information Systems (GIS), Interoperable Enterprise Facilities Management (ieFACMAN), eProjects, Electronic Project Generator (EPG) and internet Navy Facilities Assets Data Store (iNFADS) in order to support facilities engineering.; and 5) Preparing economic analysis and cost estimates related to facilities planning. NOTE: This information must be fully supported in your resume. For the GS-11: In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-09 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Resolving engineering, architecture, or community planning problems using established principles; 2) Developing planning recommendations for construction, demolition, energy, maintenance and facilities development projects; 3) Reviewing engineering/architectural drawings or specifications for construction, demolition, energy, maintenance, and/or facilities development projects to identify inconsistencies in order to produce appropriate planning products and services; 4) Assisting with planning systems and automated databases to capture spatial or geographic data to support facility planning; and 5) Analyzing the impacts (i.e., benefits, cost effectiveness, and liabilities) of facility projects and making recommendations to decision-makers. NOTE: This information must be fully supported in your resume. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series, https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf and https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series , https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf and For 0020 series: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0000/community-planning-series-0020/ For 0807 series: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/landscape-architecture-series-0807/ For 0808 series: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/ For 0810 series: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/civil-engineering-series-0810/ For 0896 series:https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/industrial-engineering-series-0896/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Applicants for the GS-11 level that do not meet the specialized experience as described in the Education section below may qualify with education or a combination of experience and education as follows: You have successfully completed a Ph.D. or equivalent doctoral degree directly related to the position being filled; or you have successfully completed three full years of progressively higher level graduate education leading to a Ph.D. or equivalent degree directly related to the position being filled; or you have a combination of experience and education as described above that equal at least one hundred percent of the qualification requirements. Education For the 0810 Civil Engineer/ or 0896 Industrial Engineer - applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering scien