INTERDISCIPLINARY ENGINEER/ COMPUTER SCIENTIST with Security Clearance

Summary This is a public notice flyer to notify interested applicants of anticipated vacancies through the STRL Mission Support direct hire authority. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer. Duties * You will provide systems engineering advice, consultation and technical documentation to engineers, project directors and management on designated specialty areas, as required. * You will integrate systems engineering and subject-matter-expertise requirements, approaches, trade-offs, costs, schedule and risks as the consolidated technical input to the IPT. * You will finalize the performance requirements as baselined in the configuration, design and performance characteristics of the conceptually defined training system. * You will support the requirements definition and acquisition of F-35 distributed training, requirements definition and future acquisition of coalition distributed training standards and F-35 integration into customer provided networks. * You will support updates of the pilot training devices to support the new standards, and support stand up of additional DMT sites. * You will provide input to the technical management and performance of the engineering functions related to training systems acquisition, development, and operational support. * You will identify and document engineering staffing requirements in order to exercise technical conscience, identification of technical risks, identification of technical impacts to cost, and schedule and performance. Requirements Conditions of Employment * Must be a US Citizen. * Must be determined suitable for federal employment. * Must participate in the direct deposit pay program. * New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov * Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326. * Males born after 12-31-59 must be registered for Selective Service. * This is a bargaining unit position. * You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal. * This is a Cyber Workforce position. You must obtain qualification in accordance with DoDM 8140.03 Cyber Workforce Qualification and Management Program for area 641- System Requirements Planner level- Intermediate within 12 months of appointment. * This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Practitioner level Engineering and Technical Management area is required within established category timeframes. * Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing. * This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time. Qualifications Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Providing systems engineering advice, consultation and technical documentation to engineers, project directors and management on designated specialty areas; 2) Integrating systems engineering requirements, approaches, trade-offs, costs, schedule and risks; 3) Finalizing the performance requirements as baselined in the configuration, design and performance characteristics of the defined training system; 4) Supporting the requirements definition and acquisition of distributed mission training; 5) Supporting device updates to new standards; 6) Providing input to the technical management and performance of the engineering functions related to training systems acquisition, development, and operational support; and 7) Identifying and documenting engineering staffing requirements in order to exercise technical conscience, identification of technical risks, identification of technical impacts to cost, and schedule and performance with appropriate technical documentation and communication to program and competency personnel. Additional qualification information can be found from the following Office of Personnel Management website:
08XX: opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf
1550: Computer Science Series 1550 (opm.gov) Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess. For 08XX series: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. For 1550 Series: Bachelor's degree in computer science or bachelor's degree with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus. All academic degrees and course work must be from accredited or pre-accredited institutions. Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications (https://www.ed.gov/). Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. Foreign Education: Required for Vacancies with Positive Education or Education Substitution - Education completed in foreign co

---