Power Design Engineer II

1 week ago

Dallas, United States Raytheon Full time

Date Posted:

2024-10-31

Country:

United States of America

Location:

AZ201: RMS AP Bldg 801 1151 East Hermans Road Building 801, Tucson, AZ, 85756 USA

Position Role Type:

Onsite

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

What You Will Do

Raytheon's Effector Power (EP) Team is looking for junior to mid-level engineers who have power electronics knowledge to help design robust power systems.

The Effector Power Department is responsible for the development, from concept to integration, of Telemetry and Flight Termination products; power systems from all up round to the lowest level power regulation; servo electronics supporting all mechanical motion in our products and low noise mixed signal electronics that provides the analog to digital interface to our front-end sensors. Each of these products generally operate in lower power and voltage ranges less than 10kW and 1000V.

  • Design, analyze, simulate, test, and document power conversion (and related analog) circuitry. This circuitry will dominantly involve non-isolated and isolated switch mode power converters and linear converters. Main emphasis is on board-mounted power end use applications.
  • Assist in architecting at the circuit card level.
  • Help to see circuit card development through its design phases, from requirements definition through initial integration testing.
  • Drive to meet schedule concerns. Define schedules for circuit level tasking.
  • Guide ECAD drafters through layout and routing activities, with moderate support from senior engineers. Assist in layer stackup definition.
  • Function as an individual contributor. Understand the role of a small team lead and engage in personal technical growth.
  • Clearly present your work product to functional and program leadership.

Qualifications You Must Have:

  • Typically requires a bachelor’s degree in science, Technology, Engineering, or Mathematics (STEM) and 2 years of prior relevant experience OR an Advanced STEM degree.
  • Design, analysis, test, and/or simulation experience with one or more of the following non-isolated converter topologies: buck, boost, buck-boost.
  • Experience using tools such as MATLAB, MathCAD, Mathematica, or other similar tools.
  • Design and/or Analysis experience with analog electronics design, including at least one of the following: FETs/BJTs, op-amp, high/low/band pass filters, clock/data termination, and comparator circuits.
  • The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer:

  • An advanced degree in Electrical Engineering.
  • Design and analysis experience with analog or digital power converter design.
  • Experience guiding Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation.
  • Experience communicating and documenting technical topics at the small team level.
  • Experience in any one of the following:
    • Acting as a liaison between program and functional management in a cross-matrixed organization
    • Military specifications
    • Design considerations for voltages > 400V and/or power > 10kW. Three-phase power systems, power factor control, and inverter/rectifier development
  • Circuit simulator SIMPLIS, system simulator SABER, and/or analysis tool Mathcad.
  • Mentor Graphics DxDesigner, and/or Hyperlynx.

What We Offer

  • Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
  • Relocation Eligibility

Learn More & Apply Now

  • RTX solves some of the toughest challenges in aerospace and defense. That requires expansive thinking and bold innovation – and that, in turn, requires a culture that is diverse, equitable and inclusive.
  • We embrace individuality and diversity of thought to fuel opportunity for our employees, our customers, and our communities. We work toward progress, knowing that a more inclusive world is critical to our mission. Not just in this moment, but always.
  • Please consider the following role type definition as you apply for this role.
    •  Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
  • This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: https://www.state.gov/m/ds/clearances/c10978.htm 

Location Info

  • Tucson, AZ: https://careers.rtx.com/global/en/raytheon-tucson,-az-location
The salary range for this role is 64,000 USD - 128,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

  • Power Design Engineer II

    7 days ago

    Dallas, United States Raytheon Full time

    Date Posted:2024-10-31Country:United States of AmericaLocation:AZ201: RMS AP Bldg East Hermans Road Building 801, Tucson, AZ, 85756 USAPosition Role Type:OnsiteAt Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than...

  • Power Design Engineer II

    6 days ago

    Dallas, TX, United States Raytheon Full time

    Date Posted:2024-10-31Country:United States of AmericaLocation:AZ201: RMS AP Bldg East Hermans Road Building 801, Tucson, AZ, 85756 USAPosition Role Type:OnsiteAt Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than...

  • Power Design Engineer II

    6 days ago

    Dallas, TX, United States Raytheon Full time

    Date Posted:2024-10-31Country:United States of AmericaLocation:AZ201: RMS AP Bldg East Hermans Road Building 801, Tucson, AZ, 85756 USAPosition Role Type:OnsiteAt Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than...

  • Principal Power Design Engineer

    1 day ago

    Dallas, United States Raytheon Full time

    Date Posted: 2024-10-31 Country: United States of America Location: AZ852: RMS AP Bldg M02 1151 East Hermans Road Building M02, Tucson, AZ, 85756 USA Position Role Type: Onsite At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the...

  • Mechanical Design Engineer II

    4 weeks ago

    Dallas, Texas, United States Smith Seckman Reid Full time

    At Smith Seckman Reid, we are seeking a highly skilled Mechanical EIT II to join our team of experts in providing innovative solutions for clients with facility and infrastructure challenges.The successful candidate will assist the senior engineering staff in the execution of technical activities required on assigned projects, learning discipline-specific...

  • Design Engineer II, Burn-In Specialist

    4 weeks ago

    Dallas, Texas, United States Smiths Interconnect Full time

    Job SummarySmiths Interconnect is seeking a highly skilled Design Engineer II, Burn-In to join our team. The successful candidate will be responsible for designing new products and redesigning existing ones to meet customer needs and specifications.Key Responsibilities Designs new products and redesigns existing products of moderate complexity to meet...

  • Analog IC Design Engineer

    2 weeks ago

    Dallas, United States Texas Instruments Full time

    We can't predict what the future holds, but we know Texas Instruments will have a part in shaping it. Texas Instruments (TI) is out front and ready for the next big challenge. Our innovations are at the core of nearly every electronics product in use today. And it doesn't stop there. We're developing breakthrough technology to power the world's future...

  • DRAM Design Engineer

    4 weeks ago

    Dallas, Texas, United States Micron Technology Full time

    Job SummaryWe are seeking a highly skilled DRAM Design Engineer to join our team at Micron Technology. As a key member of our Design Engineering Group, you will be responsible for designing and analyzing digital and analog circuits used in the development of memory products.Key ResponsibilitiesDesign and simulate digital and analog circuits using CMOS logic...

  • Electrical Engineer

    4 weeks ago

    Dallas, Texas, United States SmithGroup Full time

    SmithGroup is a leading integrated design firm that combines research, data, and technology with innovation and creativity to deliver resilient and inclusive spaces that address our clients' most pressing challenges.Our teams create exceptional design solutions for various sectors, including healthcare, science and technology, workplace, mixed-use, higher...

  • Senior Electrical Engineer

    4 weeks ago

    Dallas, Texas, United States Jacobs Full time

    We're seeking a Senior Electrical Engineer to join our team at Jacobs, a global leader in delivering innovative solutions for our clients' challenges. As a Senior Electrical Engineer, you'll have the opportunity to use your vast experience in the industry to solve today's challenges and make a positive impact on our communities and society as a whole.Our...

  • Principal Power IC Layout Engineer

    3 months ago

    Dallas, United States Advanced Technology Search Full time

    We are working on behalf of a leading maker of RF/Wireless and Power Semiconductors. They have two fast- growing business units that make lower power PMICs, like LDOs, bandgaps, regulators, as well as higher power GaN and SiC DC converters.They are looking for IC Layout Engineers, up to the Principal level, based in Dallas TX, San Jose CA, and Phoenix AZ...

  • Principal Power IC Layout Engineer

    1 month ago

    dallas, United States Advanced Technology Search Full time

    We are working on behalf of a leading maker of RF/Wireless and Power Semiconductors. They have two fast- growing business units that make lower power PMICs, like LDOs, bandgaps, regulators, as well as higher power GaN and SiC DC converters.They are looking for IC Layout Engineers, up to the Principal level, based in Dallas TX, San Jose CA, and Phoenix AZ...

  • Principal Power IC Layout Engineer

    2 months ago

    dallas, United States Advanced Technology Search Full time

    We are working on behalf of a leading maker of RF/Wireless and Power Semiconductors. They have two fast- growing business units that make lower power PMICs, like LDOs, bandgaps, regulators, as well as higher power GaN and SiC DC converters.They are looking for IC Layout Engineers, up to the Principal level, based in Dallas TX, San Jose CA, and Phoenix AZ...

  • Sales Application Engineer

    4 weeks ago

    Dallas, Texas, United States STEWART & STEVENSON POWER PRODUCTS Full time

    Job SummaryWe are seeking a highly skilled Sales Application Engineer to join our team at STEWART & STEVENSON POWER PRODUCTS. As a Sales Application Engineer, you will play a crucial role in promoting the use of MTU Onsite Energy products and services to the Electrical Engineering community.Key ResponsibilitiesPerform face-to-face visits with consulting...

  • Power BI Engineer

    6 days ago

    Dallas, United States Daman Full time

    Job Title: Power BI EngineerLocation: Pheonix, AZ -or Dallas, TX - Hybrid (Once a week onsite)Role type: Long Term contractJob DescriptionWe are seeking a skilled Power BI Developer with experience in SAP ERP, including ECC to create and manage comprehensive reporting solutions across critical business functions. The ideal candidate will have a strong...

  • Autodesk’s Design Engineer

    3 weeks ago

    Dallas, United States Talent Groups Full time

    We are looking for an experienced & certified engineer who can help configure the Autodesk Token Flex console. To effectively deploy, monitor, manage, and optimize our ongoing investments with Autodesk’s design and engineering applications.Review and prepare related IT infrastructure conditions, resources and requirements with IT staff. This will include...

  • Autodesk’s Design Engineer

    3 weeks ago

    dallas, United States Talent Groups Full time

    We are looking for an experienced & certified engineer who can help configure the Autodesk Token Flex console. To effectively deploy, monitor, manage, and optimize our ongoing investments with Autodesk’s design and engineering applications.Review and prepare related IT infrastructure conditions, resources and requirements with IT staff. This will include...

  • Autodesk’s Design Engineer

    3 weeks ago

    dallas, United States Talent Groups Full time

    We are looking for an experienced & certified engineer who can help configure the Autodesk Token Flex console. To effectively deploy, monitor, manage, and optimize our ongoing investments with Autodesk’s design and engineering applications.Review and prepare related IT infrastructure conditions, resources and requirements with IT staff. This will include...

  • Mechanical Systems Design Engineer

    4 weeks ago

    Dallas, Texas, United States RTM Engineering Consultants, LLC Full time

    Job OverviewRTM Engineering Consultants, LLC is seeking a skilled Mechanical Engineer II to join our team. As a Mechanical Engineer II, you will apply mechanical systems design knowledge and skills to create construction drawings for project owners and provide continuous professional support throughout the construction process.Key ResponsibilitiesManage...

  • Data Engineer II

    4 weeks ago

    Dallas, Texas, United States TechnoGen Full time

    Job SummaryWe are seeking a highly skilled Data Engineer II to join our team at TechnoGen. As a key member of our data engineering team, you will be responsible for designing, developing, and maintaining large-scale data systems. Key Responsibilities- Design and implement data pipelines using Informatica PowerCenter- Develop and maintain data warehouses...