Control Systems Specialist

4 weeks ago

Wichita, United States CONTECH CONTROL SERVICES Full time

Control Systems Specialist

Wichita, KS


Contech Control Services is seeking team-oriented professionals who have expert knowledge of Distributive Control Systems (DCS) or Safety Instrumented System (SIS), graphics, system architecture, and logic programming of plant control systems.


Primary Duties and Responsibilities:

The Control System Specialist performs a wide range of duties including some or all of the following:


  • Configure DCS and/or SIS logic, graphics, and interfaces with other systems.
  • Responsible for design, specification, selection and services relating to control systems including basic process control systems, safety systems, telecommunications, etc.
  • Candidate will plan, budget, organize and control an important segment of a typical automation project.
  • Responsible to assist with control philosophy and/or functional descriptions.
  • Communicate progress to project manager for inclusion into reports to client.
  • Responsible for quality of the control system portion of the project


Requirements:

The Control System Specialist requirements include, but are not limited to, the following:


  • BS in Engineering field required with a PE preferable.
  • 5+ years of hands-on configuration experience with at least one of the following control systems: DCS (Honeywell, DeltaV, Foxboro, Yokogawa), SIS (Triconex, DeltaV, Honeywell).
  • Configuration experience with Wonderware and Allen-Bradley PLCs is a plus.
  • Demonstrated experience in technical execution on both FEL/FEED and EPC projects in the chemical and petrochemical industry.
  • Functional Safety experience and certification are a plus.
  • Knowledge of Microsoft software products.


Working conditions are as follows:


  • Position Type: Full Time, Full Benefits
  • Standard Hours: Monday—Thursday 7:00 am to 5:30pm
  • Overtime: Occasionally, paid by hourly rate
  • Range: Permanent
  • Travel: 25% maximum


Must be authorized to work in the US without H1B Visa sponsorship.

  • Control Systems Specialist

    4 weeks ago

    Wichita, United States CONTECH CONTROL SERVICES Full time

    Control Systems Specialist Wichita, KSContech Control Services is seeking team-oriented professionals who have expert knowledge of Distributive Control Systems (DCS) or Safety Instrumented System (SIS), graphics, system architecture, and logic programming of plant control systems.Primary Duties and Responsibilities:The Control System Specialist performs a...

  • Control Systems Specialist

    1 week ago

    Wichita, United States CONTECH CONTROL SERVICES Full time

    Control Systems Specialist Wichita, KSContech Control Services is seeking team-oriented professionals who have expert knowledge of Distributive Control Systems (DCS) or Safety Instrumented System (SIS), graphics, system architecture, and logic programming of plant control systems.Primary Duties and Responsibilities:The Control System Specialist performs a...

  • Control Systems Specialist

    2 weeks ago

    Wichita, United States CONTECH CONTROL SERVICES Full time

    Control Systems Specialist Wichita, KSContech Control Services is seeking team-oriented professionals who have expert knowledge of Distributive Control Systems (DCS) or Safety Instrumented System (SIS), graphics, system architecture, and logic programming of plant control systems.Primary Duties and Responsibilities:The Control System Specialist performs a...

  • Control Systems Specialist

    4 weeks ago

    Wichita, United States CONTECH CONTROL SERVICES Full time

    Control Systems Specialist Wichita, KSContech Control Services is seeking team-oriented professionals who have expert knowledge of Distributive Control Systems (DCS) or Safety Instrumented System (SIS), graphics, system architecture, and logic programming of plant control systems.Primary Duties and Responsibilities:The Control System Specialist performs a...

  • Control Systems Specialist

    4 weeks ago

    Wichita, United States CONTECH CONTROL SERVICES Full time

    Control Systems Specialist (Honeywell)Wichita, KSContech Control Services is seeking team-oriented professionals who have hands-on knowledge of Distributive Control Systems (DCS), specifically Honeywell Experion and TDC-3000 configuration, graphics, system architecture, and logic programming of plant control systems.Primary Duties and Responsibilities:The...

  • Control Systems Specialist

    4 weeks ago

    Wichita, United States CONTECH CONTROL SERVICES Full time

    Control Systems Specialist (Honeywell)Wichita, KSContech Control Services is seeking team-oriented professionals who have hands-on knowledge of Distributive Control Systems (DCS), specifically Honeywell Experion and TDC-3000 configuration, graphics, system architecture, and logic programming of plant control systems.Primary Duties and Responsibilities:The...

  • Control Systems Specialist

    4 weeks ago

    Wichita, United States CONTECH CONTROL SERVICES Full time

    Control Systems Specialist (Honeywell)Wichita, KSContech Control Services is seeking team-oriented professionals who have hands-on knowledge of Distributive Control Systems (DCS), specifically Honeywell Experion and TDC-3000 configuration, graphics, system architecture, and logic programming of plant control systems.Primary Duties and Responsibilities:The...

  • System Specialist I

    3 weeks ago

    Wichita, United States Building Controls and Services, Inc. Full time

    POSITION: Systems Specialist I DEPARTMENT: Operations CLASSIFICATION: Non-exempt SUMMARY: General Responsibilities: The Systems Specialist is responsible for the installation of DDC controls on various components of a new project. This position performs troubleshooting to resolve problems, referring more complex problems to supervisor. This position has the...

  • System Specialist I

    3 weeks ago

    Wichita, United States Building Controls & Services Full time

    POSITION: Systems Specialist I DEPARTMENT: Operations CLASSIFICATION: Non-exempt SUMMARY: General Responsibilities: The Systems Specialist is responsible for the installation of DDC controls on various components of a new project. This position performs troubleshooting to resolve problems, referring more complex problems to supervisor. This position has the...

  • System Specialist I

    1 month ago

    Wichita, United States Building Controls & Services Full time

    POSITION: Systems Specialist I DEPARTMENT: Operations CLASSIFICATION: Non-exempt SUMMARY: General Responsibilities: The Systems Specialist is responsible for the installation of DDC controls on various components of a new project. This position performs troubleshooting to resolve problems, referring more complex problems to supervisor. This position has the...

  • System Specialist I

    1 month ago

    Wichita, United States Building Controls & Services Full time

    POSITION: Systems Specialist I DEPARTMENT: Operations CLASSIFICATION: Non-exempt SUMMARY: General Responsibilities: The Systems Specialist is responsible for the installation of DDC controls on various components of a new project. This position performs troubleshooting to resolve problems, referring more complex problems to supervisor. This position has the...

  • Operations Specialist

    1 month ago

    Wichita, United States Camp Systems Full time

    CAMP Systems is the leading provider of aircraft compliance and health management services to the global business aviation industry. CAMP is the pre-eminent brand in its industry and is the exclusive recommended service provider for nearly all busine Operations Specialist, Operations, Specialist, Customer Service, Maintenance, Aviation, Manufacturing

  • Controls Service Technician

    1 month ago

    Wichita, United States Building Controls and Services Full time

    POSITION: Controls Service Technician DEPARTMENT: Controls and MSD Service CLASSIFICATION: Non-exempt SUMMARY: General Responsibilities: The Controls Service Technician handles job start-up, checkout, and troubleshooting for systems and service installed jobs. Performs control service related duties, including service agreement tasks and handles...

  • Controls Service Technician

    1 week ago

    Wichita, United States Building Controls and Services Full time

    POSITION: Controls Service Technician DEPARTMENT: Controls and MSD Service CLASSIFICATION: Non-exempt SUMMARY: General Responsibilities: The Controls Service Technician handles job start-up, checkout, and troubleshooting for systems and service installed jobs. Performs control service related duties, including service agreement tasks and handles...

  • Production Control Specialist

    6 days ago

    Wichita, United States Johnson Controls International Full time

    Job DescriptionThis position is not eligible for visa sponsorship.What you will do:Leads the plan to coordinate and establish operational inventory levels, by plant, by region, consistent with divisional objectives in customer service and working capital management. Optimizes product availability in a multi-location, global distribution environment. Applies...

  • Supervisory Airway Transportation Systems Specialist

    2 months ago

    Wichita, United States Federal Aviation Administration Full time

    Summary As a supervisor/manager, the selectee for this position will be eligible to receive a Manager Performance Incentive (MPI) provided eligibility requirements noted in agency policy are met. The MPI is an annual lump-sum incentive payment that considers agency performance, the manager's individual performance, and available funding. Serves as a...

  • Controls Engineer III

    2 months ago

    Wichita, United States Building Controls & Services Full time

    POSITION: Controls Engineer IIIDEPARTMENT: OperationsCLASSIFICATION: Salary + OTSUMMARY:General Responsibilities:The Controls Engineer III manages the design, tracking, and installation of systems and/or service installed jobs. This may include training of customers and employees, entering of database and programming, creating and installing new software,...

  • Controls Engineer III

    4 days ago

    Wichita, United States Building Controls & Services Full time

    POSITION: Controls Engineer IIIDEPARTMENT: OperationsCLASSIFICATION: Salary + OTSUMMARY:General Responsibilities:The Controls Engineer III manages the design, tracking, and installation of systems and/or service installed jobs. This may include training of customers and employees, entering of database and programming, creating and installing new software,...

  • Controls Engineer III

    4 weeks ago

    Wichita, United States Building Controls & Services Full time

    POSITION: Controls Engineer III DEPARTMENT: Operations CLASSIFICATION: Salary + OT SUMMARY: General Responsibilities: The Controls Engineer III manages the design, tracking, and installation of systems and/or service installed jobs. This may include training of customers and employees, entering of database and programming, creating and installing new...

  • Controls Engineer III

    1 week ago

    Wichita, United States Building Controls & Services Full time

    POSITION: Controls Engineer III DEPARTMENT: Operations CLASSIFICATION: Salary + OT SUMMARY: General Responsibilities: The Controls Engineer III manages the design, tracking, and installation of systems and/or service installed jobs. This may include training of customers and employees, entering of database and programming, creating and installing new...