Bench Mechanic

1 month ago

Gardena, United States Link Consulting Services (LinkCS) Full time

Hours: First Shift - 6:00am – 2:30pm with overtime (usually 10 hour days) and possible work on Saturday with potential 5:00am start time


Job Summary & Essential Functions: Work with general supervision, plans, lays out, fabricates, assembles, installs, and repairs sheet metal parts, equipment, and products by performing the following duties.


  • Reads and interprets blueprints, sketches, or product specifications to determine sequence and methods of fabricating, assembling, and installing sheet metal products.
  • Performs all deburring operations
  • Strip remaining maskant and silstic from finished chem mill parts
  • Removes burrs and sharp edges by use of various hand tools and materials such as files and edge breakers
  • Smoothes edges and removes build ups with air or electric equipment using abrasive disk and sleeves
  • Operates burring equipment using countersink, grinding wheels, burring rolls, bench grinders, rotary files, drill presses and jitterbug
  • Control thickness by using ultrasonic gages and micrometers calipers,, scales to work to close tolerances +/-.002
  • Responsible for the proper handling and management of hazardous waste generated in their work area.
  • Performs other duties as assigned including leading projects and participation in project committees


Required Skills & Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, qualifications, competencies, abilities and any physical demands if required. Physical demands are representative of those that must be met by an employee to successfully perform the essential requirements of this job.


  • Ability to read, interpret, and comprehend instructions such as blue prints and shop drawings, chem. mill templates with an emphasis on chemical milling features, excess and special conditions.
  • Ability to write simple correspondence.
  • Ability to effectively present information in one-on-one and small group situations.
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
  • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
  • Ability to deal with problems involving several concrete variables in standardized situations.
  • Must be able to comply with specific safety policies.
  • Read and understand internal procedures and policies.
  • Understand and follow through on both verbal and written instructions.
  • Team oriented with a continuous improvement outlook.
  • Basic Computer Skills - able to learn new screens, reports, functions, and simple software programs with assistance.
  • Critical thinking skills and good decision-making thought processes
  • Ability to effectively communicate among all levels within the organization.


Physical Demands (reasonable accommodations may be made, if necessary):

Physical Abilities

Stand – Continuously

Walk – Continuously

Sit – Occasionally

Climb – Occasionally

Crawl – Occasionally

Squat or Kneel – Frequently

Bend – Frequently

Fine Manipulation – Frequently

Reach Outward – Continuously

Reach Above Shoulder – Frequently

Drive – Occasionally


Lift / Carry

10 lbs or less – Continuously

11-20 lbs – Continuously

21-50 lbs – Frequently

51-100 lbs – N/A

Over 100 lbs – N/A


Push / Pull

10 lbs or less – Continuously

10-20 lbs – Continuously

20-50 lbs – Frequently

50-100 lbs – N/A

Over 100 lbs – N/A


N/A (Not Applicable) - Activity is not applicable to this occupation

Occasionally - Occupation requires this activity up to 33% of the time (.25 - 2.5 hrs/day)

Frequently - Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5 hrs/day)

Continuously - Occupation requires this activity more than 66% of the time (5.5+ hrs/day)


Required Experience/Education/Training/Certifications: To perform this job successfully, an individual must possess the outlined experience level, education, training, minimum years of experience, product or industry knowledge plus any certifications in order to be considered.


  • High school diploma or equivalent
  • 1 – 3 years of experience preferred


Work Environment and Safety Equipment Required: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job.


  • Working Conditions are: 95% manufacturing environment; 5% outdoors
  • Ability to wear Personal Protective Equipment (PPE) such as safety glasses and fully enclosed steel or composite toe shoes while in all manufacturing areas. Hearing protection and hard hat in certain manufacturing areas.
  • Noise level is usually moderate
  • While performing the duties of this job, the employee is regularly exposed to fumes or airborne particles and toxic or caustic chemicals.
  • The employee is occasionally exposed to wet and/or humid conditions and airborne particles.


Pay Range: $18.00 to $20.00 (hourly estimate)

  • Bench Mechanic

    23 hours ago

    Gardena, United States Kimco Staffing Services Full time

    Job DescriptionJob DescriptionCompany information: Aerospace MFG Company is a global provider of manufacturing and engineering services, engineered and structural solutions for complex applications in aerospace, defense and industrial markets! Industry and what does the company do? Aerospace company based in Los Angeles is seeking a Bench Mechanics!Job...

  • Bench Mechanic

    2 months ago

    Gardena, United States Ducommun Incorporated Full time

    Job Description Bench Mechanic Work with general supervision, plans, lays out, fabricates, assembles, installs, and repairs sheet metal parts, equipment, and products by performing the following duties. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and...

  • Bench Mechanic

    3 weeks ago

    Gardena, United States Ducommun Incorporated Full time

    Job Description Bench Mechanic Work with general supervision, plans, lays out, fabricates, assembles, installs, and repairs sheet metal parts, equipment, and products by performing the following duties. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and...

  • Bench Mechanic

    4 weeks ago

    Gardena, United States Ducommun Incorporated Full time

    Bench Mechanic Work with general supervision, plans, lays out, fabricates, assembles, installs, and repairs sheet metal parts, equipment, and products by performing the following duties. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and eventually assisted in the...

  • Bench Mechanic

    4 weeks ago

    Gardena, United States Ducommun Incorporated Full time

    Bench Mechanic Work with general supervision, plans, lays out, fabricates, assembles, installs, and repairs sheet metal parts, equipment, and products by performing the following duties. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and eventually assisted in the...

  • Bench Mechanic

    4 weeks ago

    Gardena, United States Ducommun Incorporated Full time

    Bench Mechanic Work with general supervision, plans, lays out, fabricates, assembles, installs, and repairs sheet metal parts, equipment, and products by performing the following duties. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and eventually assisted in the...

  • Bench Mechanic

    2 months ago

    Gardena, United States Ducommun Full time

    Job DescriptionBench Mechanic Work with general supervision, plans, lays out, fabricates, assembles, installs, and repairs sheet metal parts, equipment, and products by performing the following duties. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and eventually...

  • Bench Mechanic

    3 weeks ago

    Gardena, United States Ducommun Full time

    Job DescriptionBench Mechanic Work with general supervision, plans, lays out, fabricates, assembles, installs, and repairs sheet metal parts, equipment, and products by performing the following duties. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and eventually...

  • Bench Mechanic

    1 week ago

    Gardena, California, United States Ducommun Full time

    Job DescriptionBench Mechanic Work with general supervision, plans, lays out, fabricates, assembles, installs, and repairs sheet metal parts, equipment, and products by performing the following duties. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and eventually...

  • Bench Mechanic

    3 weeks ago

    Gardena, CA, United States Ducommun Incorporated Full time

    Bench Mechanic Work with general supervision, plans, lays out, fabricates, assembles, installs, and repairs sheet metal parts, equipment, and products by performing the following duties. Who are we? Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and eventually...

  • Aircraft Bench Mechanic

    2 months ago

    Gardena, United States Link Consulting Full time

    Job DescriptionJob DescriptionJob Summary & Essential Functions:Work with general supervision, plans, lays out, fabricates, assembles, installs, and repairs sheet metal parts, equipment, and products by performing the followingduties.Reads and interprets blueprints, sketches, or product specifications to determine sequence and methods of fabricating,...

  • Bench Mechanic

    1 month ago

    Gardena, United States Link Consulting Services (LinkCS) Full time

    Hours: First Shift - 6:00am – 2:30pm with overtime (usually 10 hour days) and possible work on Saturday with potential 5:00am start timeJob Summary & Essential Functions: Work with general supervision, plans, lays out, fabricates, assembles, installs, and repairs sheet metal parts, equipment, and products by performing the following duties.Reads and...

  • Bench Mechanic

    3 weeks ago

    Gardena, United States Link Consulting Services (LinkCS) Full time

    Hours: First Shift - 6:00am – 2:30pm with overtime (usually 10 hour days) and possible work on Saturday with potential 5:00am start timeJob Summary & Essential Functions: Work with general supervision, plans, lays out, fabricates, assembles, installs, and repairs sheet metal parts, equipment, and products by performing the following duties.Reads and...

  • Quality Inspector 2

    4 weeks ago

    Gardena, United States Precision Castparts Corp. Full time

    United States of America **State / County** - California **City** - Gardena **Division** - EPD **Company** - Permaswage Gardena **Function** - Quality **Workplace Type** - On-Site **Position type** - Full Time **Opportunity ID** 11797 **Company Profile** PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer;...

  • Quality Inspector 2

    3 weeks ago

    Gardena, United States Precision Castparts Corp. Full time

    United States of America **State / County** - California **City** - Gardena **Division** - EPD **Company** - Permaswage Gardena **Function** - Quality **Workplace Type** - On-Site **Position type** - Full Time **Opportunity ID** 11797 **Company Profile** PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer;...

  • Quality Inspector 2

    1 week ago

    Gardena, California, United States Precision Castparts Corp Full time

    Position Summary: Level Two: Working under minimal supervision, level two QC Inspector performs complex mechanical inspection processes, demonstrating the ability to inspect complex geometries using common inspection tools as well as optical comparators, CMMs, performing full bench setups. The QC Inspector demonstrates the advanced ability to interpret...

  • Aerospace Sheet Metal Mechanic Assembly

    3 weeks ago

    Gardena, CA, United States Ducommun Incorporated Full time

    Work with general supervision, plans, lays out, fabricates, assembles, installs, and repairs sheet metal parts, equipment, and products by performing the following duties. Starting as a hardware supply store during the California Gold Rush and eventually assisted in the birth of the aerospace industry in Southern California by providing aircraft aluminum...

  • Quality Inspector 2

    1 week ago

    Gardena, California, United States Precision Castparts Corp Full time

    CountryUnited States of AmericaState / CountyCaliforniaCityGardenaDivisionEPDCompanyPermaswage GardenaFunctionQualityWorkplace TypeOn-SitePosition typeFull TimeOpportunity ID11797 Company ProfileWith more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural...

  • Quality Inspector 2

    2 weeks ago

    Gardena, United States Precision Castparts Corp Full time

    CountryUnited States of AmericaState / CountyCaliforniaCityGardenaDivisionEPDCompanyPermaswage GardenaFunctionQualityWorkplace TypeOn-SitePosition typeFull TimeOpportunity ID11797 Company ProfileWith more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural...