Welder (1st & 2nd Shift)

1 month ago

San Diego, California, United States General Dynamics Corporation Full time
Responsibilities for this Position

Welder (1st & 2nd Shift)

Date: May 9, 2024

Location: San Diego, CA, US, 92113

Company: National Steel and Shipbuilding Com

Job Posting End Date: Until Filled
Shift: ALL
Security Clearance: No Clearance

Job Summary

Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other related tasks as assigned, some of which may become essential to the position.

Qualifications Standards

Previous experience or training is required. Must be able to qualify in two gas shielded FCAW welding processes 71T-1 and 811N3 in the three positions. Knowledge of welding characteristics of metal. Must be able to work at heights, confined spaces, and any assigned shift. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings.

Essential Job Tasks

  1. Welds parts in position for fabrication of vessels, tanks or other structural assemblies.
  2. Uses carbon electrodes to cut, shape and groove metal.
  3. May prepare workplace for welding by cleaning and/or preheating.
  4. Examines weld sizes of weld beads.
  5. Cleans weld area; sweeps and removes scrap.
  6. Other job duties as may be assigned relevant to the trade.
Materials, Tools, Equipment, Work Aids

Welding machinery, hand tools, high reach equipment and semi auto equipment. Personal protective equipment required.

Physical/Mental Involvement

Frequent to continuous lifting of welding equipment. Standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed. Works in all areas of the shipyard and on board ships. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employees work area.

Marginal Job Tasks

General housekeeping in work areas. May be required to attend safety, quality and/or process improvement meetings.

Environmental Factors

Exposure to fumes, odors, dust, gases, various climates and temperatures, and low ventilation conditions, all of which can cause discomfort and/or respiratory difficulties. Exposure to constantly moving machines, mechanical parts, and high levels of constant noise.

PAY SCALE
$ $34.72

Hourly Roles
This pay range is a reasonable estimate of the hourly range for this role. It takes into account the wide range of factors considered in making compensation decisions; including but not limited to skill sets, experience, training, and education. General Dynamics NASSCO also provides a variety of benefits including medical & dental insurance coverage, 401(k) retirement savings plan, flexible spending accounts/HSAs, life and disability insurance, company paid holidays and paid time off (PTO), wellness coaching, and an onsite health services.

General Dynamics NASSCO is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

To learn more about applicant rights under federal law, click here:
EEO is the Law Poster:
EEO is the Law - Supplement:
Pay Transparency:

If you have a disability that impacts your ability to complete the job application process and would like to request an accommodation, please contact our Human Resources Department.
Call or email . This contact information is for accommodation requests only, not to inquire about the status of applications.

Nearest Major Market: San Diego

Job Segment: Welding, Security Clearance, QA, Business Process, Fabrication, Manufacturing, Government, Quality, Management

PI

Back To Search Results General Dynamics NASSCO designs and builds auxiliary and support ships for the U.S. Navy, as well as oil tankers and dry cargo carriers for commercial markets. The company also provides repair services that assists with the overall readiness of the U.S. Navy.

  • Shipfitter (1st & 2nd Shift)

    2 weeks ago

    San Diego, California, United States General Dynamics Corporation Full time

    Responsibilities for this Position Shipfitter (1st & 2nd Shift)Date: Apr 12, 2024 Location: San Diego, CA, US, 92113 Company: National Steel and Shipbuilding Com Job Posting EndDate:Until Filled Shift:ALLSecurity Clearance: No Clearance Job Summary Assembles, cuts, and grinds metal structural parts to include plates, bulkheads, strong backs, turnbuckles, and...

  • Shipfitter (1st & 2nd Shift)

    1 month ago

    San Diego, California, United States General Dynamics Corporation Full time

    Responsibilities for this Position Shipfitter (1st & 2nd Shift) Date: Apr 12, 2024 Location: San Diego, CA, US, 92113 Company: National Steel and Shipbuilding Com Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Job Summary Assembles, cuts, and grinds metal structural parts to include plates, bulkheads, strong backs,...

  • Shipfitter (1st & 2nd Shift)

    4 weeks ago

    San Diego, California, United States General Dynamics Corporation Full time

    Responsibilities for this Position Shipfitter (1st & 2nd Shift) Date: Apr 12, 2024 Location: San Diego, CA, US, 92113 Company: National Steel and Shipbuilding Com Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Job Summary Assembles, cuts, and grinds metal structural parts to include plates, bulkheads, strong backs,...

  • Flux Core Welder

    2 weeks ago

    San Diego, California, United States Aerotek Full time

    Description:*Pay is $22hr-$30hr1st shift 5am-1:30pmWelding steel beams to form structures.They will see a drawing run basic measurementsRunning everything from lay outs, packing, and full weldsMig welding (Mostly steel)Flux core weldingset jigsmeasuring beamsset up and weld materialsSkills:Welding, Mig, Tack, Fcaw, Mig welder, Blueprint reading, flux core...

  • Flux Core Welder

    2 weeks ago

    San Diego, California, United States Aerotek Full time

    **Description:** **Pay is $22hr-$30hr** **1st shift 5am-1:30pm** Welding steel beams to form structures. They will see a drawing run basic measurements Running everything from lay outs, packing, and full welds Mig welding (Mostly steel) Flux core welding set jigs measuring beams set up and weld materials **Skills:** Welding, Mig, Tack, Fcaw, Mig welder,...

  • 2nd Shift Mechanical Assembler

    2 weeks ago

    San Diego, California, United States Volt Full time

    Volt is immediately hiring multiple 2nd Shift Assemblers for immediate hire in San Diego, CAAs a 2nd Shift Assembler you will:Work from written and verbal instructions to lay out, assemble and install prefabricated sheet, tubular, machined, mechanical, and formed parts to build up subassemblies and assemblies.Prepare mixtures of braze alloys and adhesives...

  • 2nd Shift Mechanical Assembler

    2 weeks ago

    San Diego, California, United States Volt Full time

    Volt is immediately hiring multiple 2nd Shift Assemblers for immediate hire in San Diego, CA As a 2nd Shift Assembler you will: Work from written and verbal instructions to lay out, assemble and install prefabricated sheet, tubular, machined, mechanical, and formed parts to build up subassemblies and assemblies. Prepare mixtures of braze alloys and adhesives...

  • Welder

    2 weeks ago

    San Jose, California, United States PrideStaff Full time

    Welder Shift/ Hours: Monday - Friday, First Shift 8:00 am-5:00 pmPay Rate:$28-$35 per hourLocation:San Jose, CA - Experience: 6 months of Welder experience We are excited to share a new opportunity We are currently in need of an experienced Welder, Metal Fabricator, Staffing, Skilled Trades, Welding, Staff

  • Technician, 1st Shift

    2 weeks ago

    San Diego, California, United States AMETEK Full time

    AMETEK Programmable Power is a leading company that specializes in designing, manufacturing, and offering high-quality AC and DC programmable power supplies, electronic loads, and compliance test solutions to customers who appreciate exceptional power products and services.Job Title: Production TechnicianAs a Production Technician at AMETEK Programmable...

  • Experienced Marine Welder

    2 weeks ago

    San Diego, California, United States Serco North America Full time

    Position Description : If you love and enjoy engaging in manual projects supporting our U.S Naval Ships, Serco has a great opportunity for you Serco is hiring Marine Welders to be part of a dynamic team supporting our US. Navy. You will be part of a team that works closely with the customer and other Serco team members to deliver quality work performed...

  • 1st Shift CNC Machine Operator

    2 weeks ago

    San Diego, California, United States Ultimate Staffing Services Full time

    Job DescriptionJob Description1st shift CNC Machine OperatorLocation: Scripps Ranch, CA 92131Hours: Monday - Friday - 6:00am - 230pmPay: $24 - $28/hr, with the ability to go up to $34/hr for seasoned Machinist with all the required experienceMust be able to pass a background check and drug screenTemp-HireAn industry leading manufacturer is seeking a CNC...

  • Pipe Welder-Journeyman

    4 weeks ago

    San Diego, California, United States General Dynamics Corporation Full time

    Responsibilities for this Position Pipe Welder-Journeyman Date: May 8, 2024 Location: San Diego, CA, US, 92113 Company: National Steel and Shipbuilding Com Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Job Summary Welds a variety of metal surfaces or pipe using various types of welding equipment. Welds shell plating,...

  • Pipe Welder-Journeyman

    1 month ago

    San Diego, California, United States General Dynamics Corporation Full time

    Responsibilities for this Position Pipe Welder-Journeyman Date: May 8, 2024 Location: San Diego, CA, US, 92113 Company: National Steel and Shipbuilding Com Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Job Summary Welds a variety of metal surfaces or pipe using various types of welding equipment. Welds shell plating,...

  • Cook - Part-Time 2nd Shift

    2 weeks ago

    San Francisco, California, United States Watermark Retirement Communities Full time

    Watermark is focused on keeping our communities healthy and our residents thriving through leading edge technology and well-being programs that benefit our entire Watermark family. Learn more. Stay Safe. Be Well. We are proud of the talented and nurt Cook, 2nd Shift, Part-Time, Restaurant, Program

  • Machine Operator Plater 2nd shift

    2 weeks ago

    San Jose, California, United States Telephonics Full time

    A Plating Operator is actively involved in various processes within the plating department to include etching, stripping and oxidizing PCB panels. Must maintain the work area in a safe environment while working with chemical processes and using high Machine Operator, Operator, Process Engineer, 2nd Shift, Processing, Chemical, Manufacturing, Technology

  • Housekeeper - Full-Time 1st Shift

    2 weeks ago

    San Gabriel, California, United States Watermark Retirement Communities Full time

    We are without a doubt one of the most premier retirement community, and are a dream come true for an experienced Housekeeper. At a Watermark Community our housekeepers do so much more than what the title reflects. For us it is about working with peo Housekeeper, 1st Shift, Hotel

  • Entry Level Electrical Assembler

    2 weeks ago

    San Diego, California, United States Volt Full time

    Calling all Electrical Trainees, Electrician Helpers or recent trade school Electrical / Electrician Grads looking to kickstart their career in the electrical field.Volt has teamed up with a top-notch manufacturing company in San Diego to identify multiple Electrical Assemblers to start soon.As an Electrical Assembler you will:Fabricate parts, and build...

  • Shop AssistantSandblasters 2nd shift

    2 weeks ago

    San Bernardino, California, United States SYNC Staffing Defunct Full time

    We are looking for a Shop Assistant/Sandblaster (2nd Shift)Schedule:Monday-Friday12:30PM-9PMCompensation: $20 per hourAssist in gathering materialsAbility to interpret work ordersCapable of lifting up to 50lbsUtilize cleaning suppliesOrganize hardwareOperate grinding equipmentFlexible to work in various departmentsSandblasting duty occurs 2-3 times a week...

  • Shop AssistantSandblasters 1st shift

    2 weeks ago

    San Bernardino, California, United States SYNC Staffing Defunct Full time

    We are hiringShop Assistant/Sandblasters (1st shift)Schedule:Monday-Friday4AM-12:30PMPay rate: $19h/rHelp gather materialsAble to read work ordersAble to lift 50lbsCleaning materialsHardware sortingGrindingCross trained in different departmentsSandblasting will only be required 2-3 times a week depending on the department needs.Will be trained but prefer...

  • CNC Machinist 3rd Shift

    2 weeks ago

    San Diego, California, United States Volt Full time

    Apply for tomorrow's opportunity today, with Volt Volt is immediately hiring CNC Machinist 2nd & 3rd Shift for a local leading manufacturing company in Miramar. As a CNC Machinist 2nd & 3rd Shift you will: Produce machined parts by programming, setting up, and operating a computer numerical control (CNC) machine to produce parts and tools from metal, plastic...