CNC Machinist

Found in: beBee jobs US - 2 weeks ago

Traverse City, Michigan, United States CENTURY LLC Full time

$2,000 Sign On Bonus for this Position

Job Title: CNC Machinist (Grinder)

Reports to: Department Leader

Hourly or salary: Hourly

Position type/ expected hours: Full-Time

Summary/Objective

Sets up and operate CNC and manual grinder to perform machining operations.

Essential Duties and Responsibilities

1. Reads process sheets, blueprints, and sketches of part to determine machining to be done, dimensional specifications, set up, and operating requirements.

2. Mounts workpiece between centers, in chuck, or to faceplate.

3. Selects and installs preset tooling in tool posts, turrets or indexing heads, and automatic tool change magazine, in sequence specified on process sheet.

4. Depresses buttons, toggles, and starts machining operation.

5. Observes control panel and compares with data on process sheet to verify dimensional adjustments, feed rates, and speeds of machining cuts.

6. Inspects first run piece and spot checks succeeding pieces for conformance to specifications.

7. Studies job packets and organizes materials for next run during automatic controlled cycles to shorten changeover time.

8. Sets tools before positioning them in mill or lathe.

9. Follow weekly schedule to turn jobs to meet shipping deadlines.

10. Maintain machine maintenance and cleanliness, fill out proper checklists.

11. Verify that proper tooling required to do daily tasks is on-hand.

Position Requirements

1. Problem solving – Identifies and resolves problems in a timely manner, gathers and analyzes information skillfully and develops alternative solutions.

2. Technical skills – Assesses own strengths and weaknesses, pursues training and development opportunities, strives to continuously build knowledge and skills, and shares expertise with others.

3. Teamwork – Balances team and individual responsibilities and gives and welcomes feedback.

4. Safety and Security – Observes safety and security procedures, reports potentially unsafe conditions, and uses equipment and materials properly.

5. Dependability – Follows instructions, responds to management direction, completes tasks on time or notifies appropriate person with an alternate plan.

6. Education and Experience - Associates degree or equivalent from two-year college or technical school; or six months to one-year related experience and/or training; or equivalent combination of education and experience.

7. Language Skills – Ability to read and interpret documents such as safety rules, operating and maintaining instructions and procedure manuals. Ability to write routine reports and correspondences. Ability to speak effectively before groups of customers or employees of organization.

8. Mathematical Skills – Ability to apply basic algebra and geometry.

9. Computer Skills – Basic computer skills and Epicor Manufacturing software

Come join a team of hardworking and dedicated individuals. Century can provide you with a lifelong career and advancement

opportunities Century, LLC is an equal opportunity employer. All employees are required to pass physical, background and drug testing prior to employment, including the testing of marijuana.

PI

  • CNC Machinist

    1 week ago

    Ford City, United States Career Concepts Full time

    CNC MachinistA CNC (Computer Numerical Control) Machinist is responsible for creating, optimizing, and maintaining CNC programs used in the manufacturing of precision components or parts. They work closely with engineers, designers, and machinists to translate engineering drawings and specifications into efficient and accurate machining instructions. CNC...

  • CNC Machinist

    1 week ago

    Bessemer City, United States BuildSubmarines.com Full time

    We are currently seeking an experienced and reliable CNC Machinist to join our industrial production team. You will set up and program various tools and equipment to create, modify, or repair precision parts. During production, you must monitor the machinery and conduct regular quality checks to ensure they are running properly and that the parts are...

  • CNC Machinist

    1 week ago

    Bessemer City, United States CBM Full time

    We are currently seeking an experienced and reliable CNC Machinist to join our industrial production team. You will set up and program various tools and equipment to create, modify, or repair precision parts. During production, you must monitor the machinery and conduct regular quality checks to ensure they are running properly and that the parts are...

  • CNC Machinist

    2 weeks ago

    Union City, United States FOXSEMICON TECHNOLOGY LLC Full time

    Job DescriptionJob DescriptionPosition: CNC MachinistHours: 40 hours per weekPosition SummaryWe are currently seeking an experienced and reliable CNC Machinist to join our industrial production team. You will set up and program various tools and equipment to create, modify, or repair precision parts. During production, you must monitor the machinery and...

  • CNC Machinist

    1 week ago

    Union City, United States FOXSEMICON TECHNOLOGY LLC Full time

    Job DescriptionJob DescriptionPosition: CNC MachinistHours: 40 hours per weekPosition SummaryWe are currently seeking an experienced and reliable CNC Machinist to join our industrial production team. You will set up and program various tools and equipment to create, modify, or repair precision parts. During production, you must monitor the machinery and...

  • CNC Machinist

    2 weeks ago

    Union City, United States FOXSEMICON TECHNOLOGY LLC Full time

    Job DescriptionJob DescriptionPosition: CNC MachinistHours: 40 hours per weekPosition SummaryWe are currently seeking an experienced and reliable CNC Machinist to join our industrial production team. You will set up and program various tools and equipment to create, modify, or repair precision parts. During production, you must monitor the machinery and...

  • CNC Machinist

    2 weeks ago

    Union City, United States FOXSEMICON TECHNOLOGY LLC Full time

    Job DescriptionJob DescriptionPosition: CNC MachinistHours: 40 hours per weekPosition SummaryWe are currently seeking an experienced and reliable CNC Machinist to join our industrial production team. You will set up and program various tools and equipment to create, modify, or repair precision parts. During production, you must monitor the machinery and...

  • CNC Machinist

    1 week ago

    Rapid City, United States RPM Solutions, Inc. Full time $45,000 - $60,000

    The following is a summary of the principal responsibilities and tasks associated with the CNC Machinist:There will be a significant amount of hands-on training which will allow for a general introduction to the operations of RPM Solutions and its associated safety and functional requirements.Setup, operation, programming, complex troubleshooting, and...

  • CNC Machinist

    2 weeks ago

    Kansas City, United States JARBO Full time

    Job DescriptionJob DescriptionSummary - CNC Machinist - CNC Mill or CNC Lathe: We are looking for an experienced CNC Machinist with experience working with CNC Mill or CNC Lathe. You would be responsible for producing parts utilizing CNC Mills or CNC Lathes, which will include setting up the mill or lathe, operating the mill or lathe, and checking produced...

  • CNC Machinist

    2 weeks ago

    Kansas City, United States JARBO Full time

    Job DescriptionJob DescriptionSummary - CNC Machinist - CNC Mill or CNC Lathe: We are looking for an experienced CNC Machinist with experience working with CNC Mill or CNC Lathe. You would be responsible for producing parts utilizing CNC Mills or CNC Lathes, which will include setting up the mill or lathe, operating the mill or lathe, and checking produced...

  • CNC Machinist

    2 weeks ago

    Webb City, United States Cardinal Scale Manufacturing Co Full time

    Job DescriptionJob DescriptionSummary/ObjectiveThe CNC machinist sets up and operates computer numerical control machines to fabricate parts. The CNC machinist sets up the machine to specifications based on prints, loads parts and operates the machine, cycles machine and detects malfunctions in machine operations, such as worn or damaged cutting tools. The...

  • CNC Machinist

    2 weeks ago

    Webb City, United States Cardinal Scale Manufacturing Co Full time

    Job DescriptionJob DescriptionSummary/ObjectiveThe CNC machinist sets up and operates computer numerical control machines to fabricate parts. The CNC machinist sets up the machine to specifications based on prints, loads parts and operates the machine, cycles machine and detects malfunctions in machine operations, such as worn or damaged cutting tools. The...

  • CNC Machinist

    6 days ago

    West Valley City, United States Laborie Medical Technologies Corp Full time

    We believe that great healthcare is an essential safeguard of human dignity.At Laborie, we know the work we do matters - it's what fuels our motivation and contributes to our success. If you're ready to make a positive impact in the lives of patients across the globe, we'd like to meet you.We support and empower our employees to grow their careers in an...

  • CNC Machinist

    2 weeks ago

    Ponca City, United States Ponca City Development Authority Full time

    Job DescriptionJob DescriptionCNC Machinist, 2nd shift position, 2:30PM-11PMMust have 3-5 years of CNC Machinist Experience and be able to work independently. Job Type: Full-timePay: $15.00 and up DOECompetenciesTo perform the job successfully, an individual should demonstrate the following competencies:Teamwork - Balances team and individual...

  • CNC Machinist

    1 week ago

    Ponca City, United States Ponca City Development Authority Full time

    Job DescriptionJob DescriptionCNC Machinist, 2nd shift position, 2:30PM-11PMMust have 3-5 years of CNC Machinist Experience and be able to work independently. Job Type: Full-timePay: $15.00 and up DOECompetenciesTo perform the job successfully, an individual should demonstrate the following competencies:Teamwork - Balances team and individual...

  • CNC Machinist

    2 weeks ago

    Spring City, United States Extreme Holding Full time

    Job DescriptionJob DescriptionDescription:Progressive Machining Co. is seeking an experienced CNC machinist to operate Haas CNC. The machinist will setup and operate machinery for various jobs. Requirements:Responsibilities•Setup and program machinery•Identify material to be cut•Accurately read a tape measure and customer's drawings•Lift and move...

  • CNC Machinist

    1 week ago

    Spring City, United States Extreme Holding Full time

    Job DescriptionJob DescriptionDescription:Progressive Machining Co. is seeking an experienced CNC machinist to operate Haas CNC. The machinist will setup and operate machinery for various jobs. Requirements:Responsibilities•Setup and program machinery•Identify material to be cut•Accurately read a tape measure and customer's drawings•Lift and move...

  • CNC Machinist Floater

    1 week ago

    Webb City, United States Cardinal Scale Manufacturing Co Full time

    Job DescriptionJob DescriptionSummary/ObjectiveThe CNC machinist floater has the knowledge, skill and ability to set up and operate all machines in the machine shop. The CNC machinist floater sets up machines to specifications based on prints, loads parts and operates machines, cycles the machines and detects malfunctions in machine operations, such as worn...

  • CNC Machinist Floater

    1 week ago

    Webb City, United States Cardinal Scale Manufacturing Co Full time

    Job DescriptionJob DescriptionSummary/ObjectiveThe CNC machinist floater has the knowledge, skill and ability to set up and operate all machines in the machine shop. The CNC machinist floater sets up machines to specifications based on prints, loads parts and operates machines, cycles the machines and detects malfunctions in machine operations, such as worn...

  • CNC Lathe Machinist

    1 week ago

    Imlay City, United States ResourceMFG Full time

    summary ResourceMFG is hiring an experienced CNC Mill machinist for a great company in Oklahoma City! Hours: 6a-4pm or 4pm-2am Monday-Friday OT available also! Pay: $22 and up per hour depending on experience Job Details Set up, edit lathe machinery Utilize Fanuc, Mazatrol and Haas controls 3-5 years experience CNC lathe. Send resume and pay requirements to...