engineering equipment operator

2 weeks ago


Maryland, United States USAJobs Full time
Duties

- Operates one or more types of heavy equipment to push, pull, pile, or load materials such as sand, gravel, earth, coal, moving and covering refuse, and clearing brush, rocks, tree stumps, and other material
- Maintains, repairs, and constructs flexible roads, pavements, parking areas, airdromes, bike paths, or similar surfaces of asphalt.
- Maintains, repairs, and constructs rigid pavements or similar cement and concrete surfaces.
- Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment.
- Uses and maintains tools and equipment.

Requirements

Conditions of Employment
  • U.S. Citizenship Required
  • Males must be registered for Selective Service, see
  • This posn is subject to provisions of the DoD Priority Placement Program
  • Disclosure of Political Appointments
  • Emergency overtime may be required.
  • The work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required for the position. Class B Commercial Drivers License (CDL) is required.
  • Shift work may be required. The employee may be required to work other than normal duty hours, which may include evenings, weekends, and/or holidays.
  • May be required to train and/or guide lower grade employees.
  • This position requires a physical/medical examination. The physical requirements of this position as determined by the manager are: Heavy physical effort is used by the operator in constantly reaching,
  • bending, turning, and moving hands, arms, feet, and legs to handle different sets of controls to operate the equipment and attachments.
  • Considerable strain is caused by the constant vibration of the equipment and the jerking and jolting from operating over rough surfaces. Frequently required to work in awkward or strained positions. The employee frequently lifts,
  • carries, and handles items weighing up to 40 pounds. When performing cement work, employee is frequently required to perform heavy lifting up to 100 pounds. Asphalt work requires considerable physical effort while using
  • pickax or air hammer to remove damaged pavement. Work requires frequent stooping, stretching, bending, kneeling, and working in tiring, uncomfortable positions for long periods.
  • In addition, work involves frequent movement and maneuvering of large, heavy equipment using hoists, holders, and pulleys, attaching and disconnecting tow bars, as required
  • This position is designated as a key position IAW AFI Duties of this position are essential to the accomplishment of artime/contingency operations. Incumbents of key positions must be removed from their
  • military recall status if alternative for filling of the position during an emergency are not available.
  • This is Mission Essential (ME) during hazardous weather and incumbent is required to report for duty. This is a ME position performing a Mission Critical Function (MCF) which must continue uninterrupted after
  • the occurrence of an emergency and continued through full resumption of all functions. IAW, DoDI , Defense Continuity Programs."
  • This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program.

    Qualifications

    In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.

    QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-5700 Transportation/Mobile Equipment Operation Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.

    The screen out element for this position is ability to do the work of a ENGINEERING EQUIPMENT OPERATOR (ROAD CONSTR WRKR) without more than normal supervision.

    JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
    1. Knowledge of engineering equipment such as graders, tractors with bulldozer or angle dozer blades, front-end loaders, backhoes, and trench diggers; and the different sets of controls or operation of the equipment and attachments.
    2. Knowledge of methods and techniques of subsurface preparation and constructing and repairing asphalt and cement surfaces.
    3. Knowledge of safety regulations, practices, and procedures.
    4. Skill in applying and leveling gravel, crushed stone, sand, or other aggregates to the proper thickness for the subsurface; applying sealer; shaping curbs and drainage ditches; curing asphalt with sealer; and manipulating the controls to adjust spreaders, sprayers, post hole diggers, backhoes, moveable dozer blades, and front-end loading devices.
    5. Ability to use and maintain power tools, hand tools, and related equipment.
    6. Ability to read and interpret instructions, blueprints, drawings, and sketches.

    Physical Effort:
    Heavy physical effort is used by the operator in constantly reaching, bending, turning, and moving hands, arms, feet, and legs to handle different sets of controls to operate the equipment and attachments. Considerable strain is caused by the constant vibration of the equipment and the jerking and jolting from operating over rough surfaces. Frequently required to work in awkward or strained positions. The employee frequently lifts, carries, and handles items weighing up to 40 pounds. When performing cement work, employee is frequently required to perform heavy lifting up to 100 pounds. Asphalt work requires considerable physical effort while using pickax or air hammer to remove damaged pavement. Work requires frequent stooping, stretching, bending, kneeling, and working in tiring, uncomfortable positions for long periods. In addition, work involves frequent movement and maneuvering of large,
    heavy equipment using hoists, holders, and pulleys, attaching and disconnecting tow bars, as required.

    Working Conditions:
    The employee works outside in all kinds of weather frequently exposed to dust and dirt. Works near moving parts of equipment and machinery. Employee is regularly exposed to the possibility of cuts, scrapes, bruises, falls, falling material, or injury from equipment. May be required to wear protective clothing such as hard hats, steel-toed shoes, gloves, masks, and aprons.

    PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

    VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

    Education

    This job does not have an education qualification requirement.

    Additional information

    Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here . To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.

    Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.

    120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.

    Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected, and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.

    Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.

    Direct Deposit: All federal employees are required to have direct deposit.

    If you have questions regarding this announcement and have hearing or speech difficulties click here .



  • Maryland, United States Aviation Systems Engineering Company Full time

    Description As the Security Systems Engineer (SSE) , you will provide specialized systems engineering support to a NAVAIR acquisition program based at NAS Patuxent River, MD. You may also act as a project lead in the development of engineering procedures and controls. Your extensive experience with NAVAIR SETR and technology acquisition processes will enable...


  • Maryland Heights, United States Otis Worldwide Full time

    Date Posted: 2024-04-25 Country: United States of America Location: OT139: CZ - ST LOUIS (BRENTWOOD) 1976 Congressional Drive , Maryland Heights, MO, 63146 USA Otis Elevator Company is searching for a highly motivated Sr Supervisor, New Equipment & Modernization Field Operations to drive productivity and the performance of new equipment projects for...


  • Maryland Heights, United States Otis Worldwide Full time

    Date Posted: 2024-04-25 Country: United States of America Location: OT139: CZ - ST LOUIS (BRENTWOOD) 1976 Congressional Drive , Maryland Heights, MO, 63146 USA Otis Elevator Company is searching for a highly motivated Sr Supervisor, New Equipment & Modernization Field Operations to drive productivity and the performance of new equipment projects for the...


  • Maryland Heights, Missouri, United States Otis Worldwide Full time

    Date Posted:Country:United States of AmericaLocation:OT139: CZ - ST LOUIS (BRENTWOOD) 1976 Congressional Drive , Maryland Heights, MO, 63146 USAOtis Elevator Company is searching for a highly motivated Sr Supervisor, New Equipment & Modernization Field Operations to drive productivity and the performance of new equipment projects for the branch and...


  • Maryland Heights, United States Otis Worldwide Corporation Full time

    Direct, supervise, and lead the performance of field operations for the New Equipment installation side of Otis business. Supervise construction mechanics and installation teams. Achieve all financial performance targets including profit and working Operations, Field, Equipment, Supervisor, Field Technician, Operation, Manufacturing, Business Services

  • Application Engineer

    7 hours ago


    Maryland Heights, United States Arizon Companies Full time

    Job DescriptionJob DescriptionPOSITION SUMMARYApplication engineering is a challenging, yet creative position! Operating in a custom design manufacturing firm in the HVAC industry, the Application Engineer will incorporate air-handling, cooling, and heating components into a functional unit. They are responsible for the design, suitability, performance,...

  • Electrical Engineer

    4 weeks ago


    Germantown, Maryland, United States IPS-Integrated Project Services Full time

    Job Description:At IPS, you'll apply your knowledge, skills, and passion to make a difference in the lives of people, solving complex challenges related to pharmaceutical, biotech, and animal health research and manufacturing facilities. We're looking for a developing, innovative Electrical Engineer to assist in planning and designing electrical engineering...

  • Application Engineer

    3 weeks ago


    Maryland Heights, United States Arizon Companies Full time

    POSITION SUMMARY Application engineering is a challenging, yet creative position! Operating in a custom design manufacturing firm in the HVAC industry, the Application Engineer will incorporate air-handling, cooling, and heating components into a functional unit. They are responsible for the design, suitability, performance, serviceability and durability of...

  • Application Engineer

    2 weeks ago


    Maryland Heights, United States Arizon Companies Full time

    Job DescriptionJob DescriptionPOSITION SUMMARYApplication engineering is a challenging, yet creative position! Operating in a custom design manufacturing firm in the HVAC industry, the Application Engineer will incorporate air-handling, cooling, and heating components into a functional unit. They are responsible for the design, suitability, performance,...

  • Application Engineer

    3 weeks ago


    Maryland Heights, United States Arizon Companies Full time

    Job DescriptionJob DescriptionPOSITION SUMMARYApplication engineering is a challenging, yet creative position! Operating in a custom design manufacturing firm in the HVAC industry, the Application Engineer will incorporate air-handling, cooling, and heating components into a functional unit. They are responsible for the design, suitability, performance,...

  • Cyclotron Engineer

    1 month ago


    Maryland Heights, United States curium Full time

    About Curium Curium is the world's largest nuclear medicine company with more than a century of industry experience. We develop, manufacture and distribute world-class radiopharmaceutical products to help patients around the globe. Our proven heritage combined with a pioneering approach are the hallmarks to deliver innovation, excellence and unparalleled...

  • Mechanical Engineer

    4 weeks ago


    Maryland Heights, United States Per Se Group Full time

    SummaryPer Sé Group has an exciting new job opportunity for a Mechanical/Project Engineer to work with our premier client who is a leader in the HVAC Mechanical Services Industry. With a focus on energy efficiency, our client has been entrusted with the design and installation of mechanical systems across the country for more than 250 projects. From project...

  • Mechanical Engineer

    1 month ago


    Maryland Heights, United States Selectek Full time

    We have an exciting engineering role for a Mechanical Engineer assist with HVAC design work. In this role the work will focus on HVAC projects for healthcare, laboratories, food processing facilities and other similar projects. A strong background in HVAC design for commercial or industrial projects will be considered. Any experience with Process Piping...

  • Cyclotron Engineer

    3 weeks ago


    Maryland Heights, United States Curium Live Forward Full time

    Summary of Position A Cyclotron Engineer serves as one of a group of specialists / engineers who are responsible for all technical aspects pertaining to the monitoring, training, planning, and execution of operations, troubleshooting, maintenance, repair, and upgrade project activities for multiple particle accelerators (cyclotrons). This position must...


  • Maryland Heights, United States Curium Live Forward Full time

    Summary of Position The Senior Director North America Engineering Services serves a pivotal role in overseeing critical aspects of engineering operations, ensuring safety, compliance, and efficiency in a radioactive pharmaceutical facility. Responsibilities will encompass New Product Initiatives, Controls Engineering, and CapEx Program and Project...

  • Mechanical Engineer

    4 weeks ago


    Maryland City, Maryland, United States Planate Management Group Full time

    Planate Management Group (PMG) is a Service-Disabled Veteran-Owned Small Business (SDVOSB) headquartered in Alexandria, Virginia, and Orlando, Florida USA with a technical support center in South East Asia and East Africa, that provides program management and facilities engineering services worldwide. Planate is a small business provider of planning, design,...


  • Maryland Line, United States Wallace Montgomery Full time

    Job DetailsJob Location Maryland Office - Hunt Valley, MD Position Type Full Time Description Founded in 1975, Wallace Montgomery is a recognized leader in planning, engineering, and construction management. As an ENR Top 500 Design Firm, WM's staff of Professional Engineers, Planners, Surveyors, Technicians, Construction Inspectors, and Support Personnel...


  • Maryland Line, United States Wallace Montgomery Full time

    Job DetailsJob Location Maryland Office - Hunt Valley, MD Position Type Full Time Description Founded in 1975, Wallace Montgomery is a recognized leader in planning, engineering, and construction management. As an ENR Top 500 Design Firm, WM's staff of Professional Engineers, Planners, Surveyors, Technicians, Construction Inspectors, and Support Personnel...


  • Maryland Line, United States Fuse Engineering Full time

    Patching servers and workstations with Red Hat Satellite server STIG compliance applied to all machines (assuming it makes sense to do so) Maintaining STE compliance (SEAR logs, UAM reporting, McAfee reporting, Nessus Agent scanning) Work with ESXi and vCenter to ensure virtual machines are patched and that VMs are running smoothly for end user developers...

  • Mechanical Engineer

    4 weeks ago


    Maryland Heights, Missouri, United States Selectek Full time

    We have an exciting engineering role for a Mechanical Engineer assist with HVAC design work. In this role the work will focus on HVAC projects for healthcare, laboratories, food processing facilities and other similar projects. A strong background in HVAC design for commercial or industrial projects will be considered. Any experience with Process Piping...