Machinist (2nd or 3rd shift)

3 weeks ago

Vandalia, Ohio, United States General Electric Full time

Job Description Summary

The Machinist will set up, program, machine and inspect production/prototype parts for generators, starters and other rotating assemblies. Position is available on either 2nd or 3rd shift based on preference.

Job Description

Pay starts at $26 per hour, with NSB 5.5% for 2nd and 9.5% for 3rd shift. Position will require training on days for several months before going to preferred shift, but NSB will be paid during training period.

ESSENTIAL RESPONSIBILITES

  • Operate a variety of machining tools with a high degree of skill; Perform setup and operation of Manual machines: Knee mills, engine lathes, turret lathes, OD grinders, ID grinders. Also CNC machines: Mazak lathe, Mazak mill, Studer OD grinder, ProtoTrak Lathe and mill.
  • Machine quality parts from work instructions and blueprints.
  • Use measuring equipment such as: vernier micrometers, inside mics, height gages, intrimiks, air gages, dial indicators, dial bore gages to inspect parts during and after machining
  • Make parts from blueprints to close tolerances; produce error-free products
  • Make simple jigs and fixtures from part prints
  • Read and complete forms and generate meaningful reports and charts
  • Keep all machinery, tools, and work areas clean and trammed in
  • Apply basic math calculations (addition, subtraction, multiplication and division of fractions, decimals, and whole numbers) and concepts of geometry and trigonometry; compute numerical conversions to and from the metric system

MIMINMUM QUALIFICATIONS

  • Must have at least 2 years of experience as a machinist or tool and die maker, setting up and running both manual and CNC machines or have completed at least 2 years of trade/vocational school or an apprenticeship program that included training in manual and CNC machining and or tool and die making.
  • Must have a High School Diploma or GED
  • Must be able to lift up to 25 pounds repetitively, occasionally lift up to 35 pounds non-repetitively, and sometimes lift over 35 pounds with assistance
  • Conform to all EHS guidelines including, but not limited to, wearing required personal protective equipment (PPE); Work in an environment with moderate noise intensity (85 to 89.9 dBa) and areas where hearing protection is required, Work in an environment where, due to normal machining operations, there may be dust, chips, fumes, or smoke (not over OSHA Permissible Exposure Levels)
DESIRED CHARACTERISTICS
  • 5 years of experience in machining, including setup and operation of manual mills, lathes, and grinders
  • Ability to program conversational machines and in G&M code
  • Advanced knowledge of mechanisms and machine operations
  • Basic knowledge in principles of metal rule dies, CAD/CAM software, and assembly and inspection methods
  • Basic computer skills
  • Ability to read blueprints as well as understand applicable information such as written instructions, procedures and specifications that apply to daily work operations
  • Ability to work in a team-based environment and maintain an excellent record of attendance and punctuality
  • Ambition to excel and advance in skills and knowledge

This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.

Additional Information

GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable).

Relocation Assistance Provided: No

  • Machinist 1st shift

    3 weeks ago

    Vandalia, Ohio, United States GE Aviation Full time

    Job Description Summary The Machinist will set up, program, machine and inspect production/prototype parts for generators, starters and other rotating assemblies. Position is available on either 2nd or 3rd shift based on preference. Job Description Pay is $ $26 per hour based on experience.ESSENTIAL RESPONSIBILITESOperate a variety of machining tools with a...

  • Machinist 1st shift

    4 weeks ago

    Vandalia, Ohio, United States GE Aviation Full time

    Job Description Summary The Machinist will set up, program, machine and inspect production/prototype parts for generators, starters and other rotating assemblies. Position is available on either 2nd or 3rd shift based on preference. Job Description Pay is $ $26 per hour based on experience.ESSENTIAL RESPONSIBILITESOperate a variety of machining tools with a...

  • Custodian - 2nd Shift

    4 days ago

    Vandalia, Ohio, United States Dayton Area School Consortium Full time

    Position Type: Maintenance/Custodial/Custodian Date Posted: 5/30/2024 Location: Butler High School Date Available: ASAP District: Vandalia-Butler City Schools - website 2nd Shift Anticpated hours are 3:00 PM - 11:30PM Attachment(s):Job Description

  • Balance Technician

    4 weeks ago

    Vandalia, Ohio, United States GE Aerospace Full time

    Job Description SummaryThis position uses high speed balancing equipment and mills to produce precision balanced aerospace rotors. This is followed up using spin test automation which verifies the quality the rotor prior to installation within an aircraft generator. The candidate will be required to have both mechanical aptitude as well as technical...

  • Warehouse - Vandalia, OH. 2nd Shift 3:15pm - 11:45pm

    4 days ago

    Vandalia, Ohio, United States Precisional LLC Full time

    Spectra Precision has been the number one brand in the laser industry for years. The name is synonymous with innovation and quality in the construction industry. Our purpose is to support our customer in doing their job, helping them become efficient and effective on the jobsite. Spectra Precision has a long history of innovation in the construction...

  • Machinist (2nd or 3rd shift)

    4 weeks ago

    Vandalia, United States General Electric Full time

    Job Description Summary The Machinist will set up, program, machine and inspect production/prototype parts for generators, starters and other rotating assemblies. Position is available on either 2nd or 3rd shift based on preference. Job Description Pay starts at $26 per hour, with NSB 5.5% for 2nd and 9.5% for 3rd shift. Position will require training on...

  • Balance Technician

    4 weeks ago

    Vandalia, United States General Electric Full time

    Job Description Summary This position uses high speed balancing equipment and mills to produce precision balanced aerospace rotors. This is followed up using spin test automation which verifies the quality the rotor prior to installation within an aircraft generator. The candidate will be required to have both mechanical aptitude as well as technical...

  • Balance Technician

    3 weeks ago

    Vandalia, United States General Electric Full time

    Job Description Summary This position uses high speed balancing equipment and mills to produce precision balanced aerospace rotors. This is followed up using spin test automation which verifies the quality the rotor prior to installation within an aircraft generator. The candidate will be required to have both mechanical aptitude as well as technical...

  • Balance Technician

    3 weeks ago

    Vandalia, United States GE Renewable Energy Power and Aviation Full time

    Job Description SummaryThis position uses high speed balancing equipment and mills to produce precision balanced aerospace rotors. This is followed up using spin test automation which verifies the quality the rotor prior to installation within an aircraft generator. The candidate will be required to have both mechanical aptitude as well as technical...

  • Balance Technician

    4 weeks ago

    Vandalia, United States GE Aerospace Full time

    Job Description SummaryThis position uses high speed balancing equipment and mills to produce precision balanced aerospace rotors. This is followed up using spin test automation which verifies the quality the rotor prior to installation within an aircraft generator. The candidate will be required to have both mechanical aptitude as well as technical...

  • Balance Technician

    3 weeks ago

    Vandalia, United States GE Renewable Energy Power and Aviation Full time

    Job Description SummaryThis position uses high speed balancing equipment and mills to produce precision balanced aerospace rotors. This is followed up using spin test automation which verifies the quality the rotor prior to installation within an aircraft generator. The candidate will be required to have both mechanical aptitude as well as technical...

  • Balance Technician

    3 weeks ago

    Vandalia, United States GE Aerospace Full time

    Job Description SummaryThis position uses high speed balancing equipment and mills to produce precision balanced aerospace rotors. This is followed up using spin test automation which verifies the quality the rotor prior to installation within an aircraft generator. The candidate will be required to have both mechanical aptitude as well as technical...

  • Balance Technician

    3 weeks ago

    Vandalia, United States GE Aviation Full time

    Job Description Summary This position uses high speed balancing equipment and mills to produce precision balanced aerospace rotors. This is followed up using spin test automation which verifies the quality the rotor prior to installation within an aircraft generator. The candidate will be required to have both mechanical aptitude as well as technical...

  • Balance Technician

    3 weeks ago

    Vandalia, United States GE Aviation Full time

    Job Description Summary This position uses high speed balancing equipment and mills to produce precision balanced aerospace rotors. This is followed up using spin test automation which verifies the quality the rotor prior to installation within an aircraft generator. The candidate will be required to have both mechanical aptitude as well as technical...

  • Custodian - 2nd Shift

    2 weeks ago

    Vandalia, United States Dayton Area School Consortium Full time

    Position Type: Maintenance/Custodial/Custodian Date Posted: 5/30/2024 Location: Butler High School Date Available: ASAP District: Vandalia-Butler City Schools - website 2nd Shift Anticpated hours are 3:00 PM - 11:30PM Attachment(s): Job Description

  • Forklift Driver

    4 weeks ago

    Vandalia, United States Crocs Full time

    Overview At Crocs, our Forklift Drivers are responsible for operating and managing powered equipment to load and unload product and move them to and from the loading docks and racking areas. This position supports our 2nd shift operations, Monday - Thursday, 6:00pm-4:30am. * We have openings on all three shifts* Please apply with a current copy of your...

  • Forklift Driver

    3 weeks ago

    Vandalia, United States Crocs Full time

    Overview At Crocs, our Forklift Drivers are responsible for operating and managing powered equipment to load and unload product and move them to and from the loading docks and racking areas. This position supports our 2nd shift operations, Monday - Thursday, 6:00pm-4:30am. * We have openings on all three shifts* Please apply with a current copy of your...

  • Balance Technician

    4 weeks ago

    Vandalia, United States GE Aviation Full time

    Job Description SummaryThis position uses high speed balancing equipment and mills to produce precision balanced aerospace rotors. This is followed up using spin test automation which verifies the quality the rotor prior to installation within an aircraft generator. The candidate will be required to have both mechanical aptitude as well as technical...

  • Forklift Driver

    3 weeks ago

    Vandalia, United States Crocs Full time

    Overview At Crocs, our Forklift Drivers are responsible for operating and managing powered equipment to load and unload product and move them to and from the loading docks and racking areas. This position supports our 2nd shift operations, Monday - Thursday, 6:00pm-4:30am. * We have openings on all three shifts* Please apply with a current copy of your...

  • Forklift Driver

    3 weeks ago

    Vandalia, United States Crocs Full time

    Overview At Crocs, our Forklift Drivers are responsible for operating and managing powered equipment to load and unload product and move them to and from the loading docks and racking areas. This position supports our 2nd shift operations, Monday - Thursday, 6:00pm-4:30am. * We have openings on all three shifts* Please apply with a current copy of your...

  • Certified Nursing Aide

    4 weeks ago

    Vandalia, United States Gardant Management Solutions, Inc. Full time

    At Brookstone Estates of Vandalia each team member serves a pivotal role in providing enriched lifestyles that are enhanced by the values of love, compassion, and dignity. By embracing these values, we aim to create an innovative and inclusive cultur Aide, Nursing, 3rd Shift, Certified, Solutions, Property Management, Healthcare

  • Certified Nursing Aide

    3 weeks ago

    Vandalia, United States Gardant Management Solutions, Inc. Full time

    At Brookstone Estates of Vandalia each team member serves a pivotal role in providing enriched lifestyles that are enhanced by the values of love, compassion, and dignity. By embracing these values, we aim to create an innovative and inclusive cultur Aide, Nursing, 3rd Shift, Certified, Solutions, Property Management, Healthcare

  • Electronic Test Technician 2nd Shift

    3 weeks ago

    Vandalia, United States GE Renewable Energy Power and Aviation Full time

    Job Description Summary2nd shift positions will require training on days for several months before going to preferred shift, but NSB will be paid during training period. 2nd shift hours are 2pm-10:30pm. We offer a dynamic, fast-paced work environment for someone looking to grow and excel in their role. You'll perform testing, measuring, and recording for...

  • Electronic Test Technician 2nd Shift

    3 weeks ago

    Vandalia, United States GE Renewable Energy Power and Aviation Full time

    Job Description Summary2nd shift positions will require training on days for several months before going to preferred shift, but NSB will be paid during training period. 2nd shift hours are 2pm-10:30pm. We offer a dynamic, fast-paced work environment for someone looking to grow and excel in their role. You'll perform testing, measuring, and recording for...

  • Electronic Test Technician 2nd Shift

    4 weeks ago

    Vandalia, United States GE Aviation Full time

    Job Description Summary 2nd shift positions will require training on days for several months before going to preferred shift, but NSB will be paid during training period. 2nd shift hours are 2pm-10:30pm. We offer a dynamic, fast-paced work environment for someone looking to grow and excel in their role. You'll perform testing, measuring, and recording for...