Engineering Technician III
Found in: beBee jobs US - 2 weeks ago
Job Responsibilities:
• Responsible for assembly and support testing of mechanical and electronic devices
• Support projects for fabrication and test of all mechanical and electrical ground support equipment
• Support flat pattern layout, fabrication, (sewing) and installation of thermal blankets
• Support Assembly, Test and Launch Operations (ATLO) activities at the company and at launch site
• Perform tests, verify configuration, solder wires and cable fabrication
• Ability to work from prints and sketches and use precision measuring devices, as well as all shop and hand tools
• Perform setup operations on environmental test equipment and mechanical support equipment, start and operate test equipment from detailed procedures and make adjustments as required
• Interface with cognizant or research engineer and suggest test configurations and will perform work in accordance with the test engineers' procedures
• Assigned to projects and teamwork with engineers and technicians on the assembly and test of flight spacecraft
Required Skills:
• Typically requires a High School diploma with 8 years of related experience; related and required training; Associates with 4 years of related experience; Bachelors with 1 years of related experience; related required training
• Minimum of 6 years as a pattern maker and sewing machine operator
• Must have advanced understanding, technical expertise, and experience in the following areas: o Electro-Mechanical Assembly, with strong emphasis on thermal blanket fabrication, installation, alignment and testing also strong knowledge of thermal blanket properties and grounding procedures o Safe handling and bonding of delicate components, including all surface prep and flight hardware in a controlled environment
• Ability to work from prints and sketches and use precision measuring devices, as well as all shop and hand tools
• Experience working in 100-10,000 clean room, and Hi bay protocol
• Advanced understanding of applicable policies, procedures, and practices in handling Flight Hardware
• Ability to work with different solvents on a daily basis
• Work with limited supervision requiring no instructions on routine work, and general instructions on new assignments
Desired Skills:
• Associates degree with 4 years of related experience; Bachelors with 2 years of related experience
• Minimum 6 years' experience as a prototype pattern maker and blanket fabricator
• Advanced understanding, technical expertise and experience in the following areas: Assembly, Test and Launch Operations. (ATLO); Electronic assemblies; assembly/dis-assembly, operation, testing, troubleshooting & diagnostics of components
• Good hand-eye coordination and manual dexterity, necessary to work with miniaturized systems or components
• Must be able to work at remote sites for extended periods
• Skilled in operations of all shop tools, including soldering and crimping
• Ability to work closely with team members, long hours in a sometimes-high stress environment
• Working knowledge of computer applications (e.g., spreadsheets, databases, word processing, web searches) for component information
-
On-Site Applications Engineer
Found in: beBee jobs US - 2 weeks ago
Pasadena, California, United States Flowserve Corporation Full timeCompany Overview:If a culture of excellence, innovation and ownership is what you're searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve's position as the global standard in comprehensive flow control solutions. Here, your opportunity for...
-
Engineering Technician III
Found in: beBee S US - 2 weeks ago
Pasadena, United States HIKINEX Full timeJob Responsibilities: • Responsible for assembly and support testing of mechanical and electronic devices • Support projects for fabrication and test of all mechanical and electrical ground support equipment • Support flat pattern layout, fabrication, (sewing) and installation of thermal blankets • Support Assembly, Test and Launch Operations (ATLO)...
-
Mechanical Engineer
1 week ago
Pasadena, United States The Walstrom Group, Inc. Full timePOSITION OVERVIEW: The Production Engineering is responsible for the continuous improvement of manufacturing processes, hard and soft goods assembly, cost reduction initiatives, processing of engineering changes, and introduction of new products. Also provide leadership, guidance and mentoring to manufacturing, technicians, and operations support staff....
-
Mechanical Engineer
6 days ago
Pasadena, United States The Walstrom Group, Inc. Full timePOSITION OVERVIEW: The following information aims to provide potential candidates with a better understanding of the requirements for this role. The Production Engineering is responsible for the continuous improvement of manufacturing processes, hard and soft goods assembly, cost reduction initiatives, processing of engineering changes, and introduction of...
-
Instrumentation Engineer
Found in: Appcast US C2 - 2 weeks ago
Pasadena, United States Flexicrew Technical Services Full timeInstrumentation EngineerOverview: Pasadena, TX: Flexicrew Technical Services (FTS) is seeking a skilled Instrumentation Engineer to join our client’s team. As an Instrumentation Engineer, you will play a crucial role in providing technical support to the instrumentation activities of the HDPE and HAD plant, focusing on improving reliability and ensuring...
-
Instrumentation Engineer
Found in: Appcast Linkedin GBL C2 - 2 weeks ago
Pasadena, United States Flexicrew Technical Services Full timeInstrumentation EngineerOverview: Pasadena, TX: Flexicrew Technical Services (FTS) is seeking a skilled Instrumentation Engineer to join our client’s team. As an Instrumentation Engineer, you will play a crucial role in providing technical support to the instrumentation activities of the HDPE and HAD plant, focusing on improving reliability and ensuring...
-
Automotive Technician
3 days ago
Pasadena, United States Express Oil Change & Tire Engineers Full timeJob DescriptionJob DescriptionCompany DescriptionExpress Oil Change & Tire Engineers is one of the leading automotive service providers in the nation with nearly 300 locations across 17 states. We employ experienced, certified technicians trained to provide premium total-car care, and we use state-of-the-art equipment and premium parts to ensure the quality...
-
Mechanical Engineer
Found in: Appcast US C2 - 2 weeks ago
Pasadena, United States The Walstrom Group, Inc. Full timePOSITION OVERVIEW:The Production Engineering is responsible for the continuous improvement of manufacturing processes, hard and soft goods assembly, cost reduction initiatives, processing of engineering changes, and introduction of new products. Also provide leadership, guidance and mentoring to manufacturing, technicians, and operations support...
-
Mechanical Engineer
Found in: Appcast Linkedin GBL C2 - 2 weeks ago
Pasadena, United States The Walstrom Group, Inc. Full timePOSITION OVERVIEW:The Production Engineering is responsible for the continuous improvement of manufacturing processes, hard and soft goods assembly, cost reduction initiatives, processing of engineering changes, and introduction of new products. Also provide leadership, guidance and mentoring to manufacturing, technicians, and operations support...
-
Instrumentation Engineer
1 week ago
Pasadena, United States CareerBuilder Full timeJob Description Job Description Instrumentation Engineer Overview: Pasadena, TX: Flexicrew Technical Services (FTS) is seeking a skilled Instrumentation Engineer to join our clients team. As an Instrumentation Engineer, you will play a crucial role in providing technical support to the instrumentation activities of the HDPE and HAD plant, focusing on...
-
Instrumentation Engineer
1 day ago
Pasadena, United States Flexicrew Technical Services (FTS) Full timeJob DescriptionJob DescriptionInstrumentation EngineerOverview: Pasadena, TX: Flexicrew Technical Services (FTS) is seeking a skilled Instrumentation Engineer to join our client’s team. As an Instrumentation Engineer, you will play a crucial role in providing technical support to the instrumentation activities of the HDPE and HAD plant, focusing on...
-
Instrumentation Engineer
1 week ago
Pasadena, United States Flexicrew Technical Services (FTS) Full timeJob DescriptionJob DescriptionInstrumentation EngineerOverview: Pasadena, TX: Flexicrew Technical Services (FTS) is seeking a skilled Instrumentation Engineer to join our client’s team. As an Instrumentation Engineer, you will play a crucial role in providing technical support to the instrumentation activities of the HDPE and HAD plant, focusing on...
-
Development Engineering Manager
1 week ago
Pasadena, United States CareerBuilder Full timeCalpine Corporation is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. Its fleet of 76 power plants in operation and one under construction represents nearly 26,000 megawatts of generation capacity. Through wholesale power operations and its retail businesses, Calpine serves...
-
Blade Welder/Technician
Found in: Talent US 2 C2 - 6 days ago
Pasadena, United States NES Fircroft Full timeResponsibilities & Qualifications of the Blade Technician/Welder include, but are not limited to:Blending skills requiredKnowledge in Tig welding and plasma in chamberAssist in identifying issues and initiating corrective action processes as necessary.Use precision measurement tools and gauges.Perform periodic maintenance on equipment.Maintain a clean and...
-
Electrical Engineer
1 week ago
Pasadena, United States Flowserve Full timeThe role of the Electrical Engineer is to address and resolve technical product issues at a customer’s facility. The services provided may consist of troubleshooting, commissioning, repair, maintenance and training of electric automation equipment. The Engineer will help the FCD MRO End-Users Services organization to increase capabilities in automation and...
-
Mobile Fleet Technician
Found in: Lensa US P 2 C2 - 2 weeks ago
Pasadena, United States NaumannHobbs Material Handling Corporation Full timeJob description Transwest Mobile Truck Repair, the leader in mobile fleet maintenance, is expanding our operations within the greater Houston area and are looking for highly qualified technicians. Technicians will be performing a wide array of bumper to bumper mechanical and maintenance services on a wide variety of trucks and vans. Qualifications for the...
-
Cable Technician
3 hours ago
Pasadena, United States Provider comm Full timeWe are seeking a Cable Installation Technician to become an integral part of our team! You will design and configure data communication systems as well as identify areas of improvement to increase efficiency. **fiber / coax EXPERIENCE TECHS ONLY*** **Responsibilities**: - Supervise installation and maintenance of communication systems - Adjust voice and...
-
Instrument Engineer
4 days ago
Pasadena, United States Workday Full timeAre you inspired by “what’s next”? So are we. When you join the Albemarle team, you contribute to a better tomorrow. You will play a role in powering many of the world’s largest and most critical industries, from energy and communications to transportation and electronics. We are putting innovation to work to improve people’s lives and we want YOU...
-
RESEARCH TECHNICIAN
Found in: Careerbuilder One Red US C2 - 34 minutes ago
Pasadena, CA, USA, United States California Institute of Technology Full timeThe Bjorkman Lab in the Division of Biology and Biological Engineering is seeking a motivated individual to join as a Research Technician. The successful candidate will assist a multidisciplinary research team on one or more projects to study antibod Technician, Research, Technology, Education, Biology
-
On-Site Applications Engineer
Found in: beBee S US - 2 weeks ago
Pasadena, United States Flowserve Corporation Full timeCompany Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your...
-
Blade Welder/Technician
Found in: beBee S US - 3 days ago
Pasadena, California, United States NES Fircroft Remote Work Freelance Full timeResponsibilities & Qualifications of the Blade Technician/Welder include, but are not limited to:Blending skills requiredKnowledge in Tig welding and plasma in chamberAssist in identifying issues and initiating corrective action processes as necessary.Use precision measurement tools and gauges.Perform periodic maintenance on equipment.Maintain a clean and...