Machine Operator Day Shift

5 days ago

Aurora, Colorado, United States Drake-Williams Steel Full time

$5,000 hiring bonus

Primary Purpose of this Position:

Fabricate parts for structural fabrication, Service Center, and misc. steel assemblies per cutting lists, shop drawings, and DWS quality requirements.

Essential Job Functions:

  • Identify steel shapes, sizes, and mill tolerances.
  • Fabricate material as trained and instructed.
  • Fabricate beams, tubes, angle, channel, bar grating, pipe, plate, or rounds according to the dimensions shown on cut lists and shop drawings, AISC code requirements for structural steel, and machine capabilities.
  • Make adjustments to machine to ensure accurate dimensions as shown on the shop drawings.
  • Identify cut list and shop drawing errors and discrepancies before or during early stages of fabrication.
  • Operate forklifts, jib cranes, overhead cranes, conveyors, and transfers in order to move materials.
  • Any other duties assigned by management.
  • Attend all meetings as required by management.
  • Consistently and reliably works scheduled hours at assigned locations.

Qualifications

Knowledge, Skills and Abilities:

  • Ability to read, write, and perform higher arithmetic computations involving addition, subtraction, multiplication, and division of whole numbers, decimals and fractions.
  • Ability to understand and carry out semi-complicated verbal and written instructions.
  • Ability to effectively communicate with co-workers, supervisors and managers.
  • Ability to work under periodic supervision focused on the progress of work and setting priorities for job completion.
  • Skill in using auto measurer, tape measure, or 1" rule.
  • Ability to pass a Drake-Williams Steel administered test that covers shop drawing interpretation, fractional number calculations, basic geometry, etc.
  • Ability to interpret, understand and utilize cutting lists, shop orders, and shop drawings.
  • Ability to use a computer for cut-lists and inventory purposes.
  • Ability to possess pride in own workmanship; demonstrate attention to detail, and work safely.
  • Ability to operate forklifts and overhead cranes in a safe and proper manner. Use and understand industry and Drake-Williams Steel adopted hand signals used for crane operations.
  • Perform minor mechanical tasks on machine (blade changes, cleaning, etc.)
  • Ability to follow inventory procedures.
  • Ability to multi-task. Physical Demands:
  • Stand FREQUENTLY over the course of the 8 to 12 hour work shift.
  • Walk OCCASIONALLY to FREQUENTLY over the course of the 8 to 12 hour work shift. The distances walked will range from a distance of a few feet to 60 foot.
  • Sit only during the break and lunch periods. Rarely one will be able to sit while cutting material.
  • Lift weights up to 20 pounds from floor to chest CONTINUOUSLY, which includes the various tools utilized in the process of performing the usual work duties.
  • Lift weights up to 35 pounds from floor to waist FREQUENTLY during the 8 to 12 hour work shift
  • Lift weights up to 60 pounds from floor to waist OCCASIONALLY during the work shift. Jib cranes and overhead cranes are available for the employee's assistance with lifting.
  • Carry weights noted above distances ranging from a few feet to 60 foot.
  • Climb OCCASIONALLY onto or over the conveyors.
  • Stoop or crouch OCCASIONALLY while performing the regular job duties. The position will be held continuously for a few seconds to 15 minutes, depending upon the job.
  • Kneel in the commission of job duties OCCASIONALLY, depending upon the job.
  • Crawl RARELY up to 10 feet to access tools, materials, etc.
  • Reach forward OCCASIONALLY to perform job duties or to retrieve tools. The employee will OCCASIONALLY be required to reach to full forward extension.
  • Reach overhead OCCASIONALLY to guide material attached to the cranes and to attach the chains from the crane to the material.
  • Push and pull drawers open OCCASIONALLY to FREQUENTLY to retrieve tools. Employee will OCCASIONALLY push material attached to a jib crane or overhead crane to properly guide into place. Force varies up to 35 pounds.
  • Push material OCCASIONALLY into machine for fabrication. (SHEAR)
  • Gross finger dexterity skills required to operate the various tools and equipment utilized in the course of standard job duties. Fine finger dexterity is not required. Non-Material Handling Demands
  • Employee is expected to work 40 hours a week. However, hours including overtime and weekends may be required based on Drake-Williams Steel's needs.
  • Hear sufficiently to be aware of safety issues
  • Visual ability to read and interpret shop drawings. Safety glasses are required in the shop area.
  • Exposure to heat, cold, wet and humid conditions in the shop area OCCASIONALLY.
  • Exposure to fumes, odors and dusts in the shop area OCCASIONALLY.
  • Exposure to solvents, greases, oils, and coolants OCCASIONALLY.
  • Wear all required Personal Protective Equipment. PPE includes steel-toe safety shoes, hearing protection, safety glasses, gloves, and hard hats. Tools Required : Pencil, Square, Tape Measure, Markers, Ball Peen Hammer, Wire Brushes, 4" Grinder, SledgeHammer, Grab Hooks, Vise Grips, Allen Wrenches, Pry-Bar, C-Clamps, Band Cutters, and Chains. Machines Utilized: Saw, Overhead Crane, Jib Crane, Pallets, Transfers, Brake, Blaster, Punch, Shear, and Forklifts. Experience and Education Required:
  • High School degree or equivalent.
  • Minimum of six months of experience in a steel manufacturing environment.

Please visit our Employee Benefits page ) for more information


  • Machine Operator

    2 weeks ago

    Aurora, Colorado, United States Integrity Staffing USA Full time

    Job Opportunity: Machine Operator A client located in Aurora is looking for a Machine Operator. In this role you will perform daily activities of operating and maintaining a clean and orderly warehouse. Machine Operators are moving around in and out of the warehouse and production floor.About the Company: Established in 1984, this company is a leading food...

  • Machine Operator

    4 weeks ago

    Aurora, Colorado, United States Aerotek Full time

    Description:We are seeking Punch Press and Brake Press or Spot Welding operators with experience in a heavy manufacturing environment. Candidates with any type of machine operating experience are qualified and will be trained on the jobCandidates need to have experience operating using quality inspection tools and following detailed work orders as well as...

  • Machine Operator

    2 days ago

    Aurora, Colorado, United States HelloFresh Full time

    We are seeking a motivated team player to join our operations team as Machine Operator in Aurora, IL. In this role, you will be responsible for supporting the production initiatives and goals set forth by the area supervisor by making sure machines in your area of responsibility are kept fully functional and operated in accordance with plant standards,...

  • Machine Operator

    4 weeks ago

    Aurora, Colorado, United States Aerotek Full time

    Description:Candidates will be responsible for the following:-Utilizing a tape measure to measure beams of steel and metal to customer order size-Operating an auto saw machine to cut pieces to length (mainly operating laser machine)-Will be operating a laser machine-trained how to set up and operate-Will use hand and power tools to assist in assembling...

  • CNC Machinist/machine Operator

    2 weeks ago

    Aurora, Colorado, United States eCom Solutions Inc Full time

    Job Title: MachinistDuration: 6 Months (high possibility for temp to perm)Pay Rate: $19-22/hr on W2Shift: 1st Shift, 2nd ShiftKEY RESPONSIBILITIESStudies blueprints, sketches, drawings, manuals, specification, or sample part to determine dimensions and tolerances of finished workpiece, sequence of operations and setup requirements. Measure, mark and scribe...

  • Gluer/Folder Machine Operator

    2 weeks ago

    Aurora, Colorado, United States Mill Rock Packaging Full time

    The Folder/Gluer Machine Operator is responsible for overseeing all aspects of production for our folder/gluer machine including setup, operation, cleanup, and recommending improvements to operations to keep and improve schedule requirements. We will evaluate starting pay based on experience.What You Will Do:Prepare make-ready of the feeder unit.Run the...

  • Machine Operator I

    2 weeks ago

    Aurora, Colorado, United States Glanbia Performance Nutrition Full time

    Glanbia is a global nutrition company, grounded in science and nature and dedicated to providing better nutrition for every step of life's journey. The company takes pure and clean ingredients including milk, whey and grains and using expert knowledge and capabilities produces high quality nutritional ingredients and branded consumer products for customers...

  • Machining Technician

    2 weeks ago

    Aurora, Colorado, United States Cummins Inc. Full time

    Description Machining Technician - 2nd Shift We believe in flexibility for you to explore your passions while making an impact through meaningful work within our inclusive workforce. That's what #LifeAtCummins is all about. We are looking for a talented Axle Machining Technician - 2nd Shift to join our team specializing in Manufacturing for our...

  • Blender Operator

    2 weeks ago

    Aurora, Colorado, United States Glanbia Full time

    Immediate Hiring for Entry-Level and Experienced manufacturing team members at Glanbia Performance Nutrition Hourly Pay: $18.00/hour in a temperature-controlled environment with opportunities to promote from within Monday through Friday set schedule Night shifts with Shift differential pay • 2nd shift 2:00pm – 10:30pm (0.75 shift diff) Benefits...

  • Production Line Operator

    2 weeks ago

    Aurora, Colorado, United States Client 6 Full time

    Production Operator (Days)Fletcher, NC$23ph + Training + Progression + Medical + Dental + Vision + PPE + Purpose built facilityAn excellent opportunity for someone from a manufacturing or production background looking to join a rapidly expanding manufacturing company, where you will work in a newly purpose built facility, and who offers fantastic training...

  • Production Line Operator

    4 weeks ago

    Aurora, Colorado, United States Client 6 Full time

    Production Operator (Days)Fletcher, NC$23ph + Training + Progression + Medical + Dental + Vision + PPE + Purpose built facilityAn excellent opportunity for someone from a manufacturing or production background looking to join a rapidly expanding manufacturing company, where you will work in a newly purpose built facility, and who offers fantastic training...

  • Slitter Operator

    2 weeks ago

    Aurora, Colorado, United States HyR-Up Solutions Full time

    Job DescriptionWe are seeking a Slitter Machine Operator to join our team at our Aurora Plant. This role involves setting up and operating a slitting machine to cut rolls of Protective Film, ensuring safety, quality, and efficiency while minimizing costs and waste.Available Shifts:- 5am-5pmSummary:The primary responsibilities include operating the slitting...

  • Production Line Operator

    2 days ago

    Aurora, Colorado, United States Client 2 Full time

    Production Operator (Nights)Fletcher, NC $24ph + Training + Progression + Medical + Dental + Vision + PPE + Purpose built facilityAn excellent opportunity for someone from a manufacturing or production background looking to join a rapidly expanding manufacturing company, where you will work in a newly purpose built facility, and who offers fantastic training...

  • Customer Service Registrar Day Shift

    4 weeks ago

    Aurora, Colorado, United States HCA Healthcare Full time

    Description Hourly Wage Estimate: / hourLearn more about the benefits offered for this job. The estimate displayed represents the typical wage range of candidates hired. Factors that may be used to determine your actual salary may include your specific skills, how many years of experience you have and comparison to other employees already in this role. The...

  • Operator, Mine Operations

    4 weeks ago

    Aurora, Colorado, United States Nutrien Full time

    Pay Band: WAGE At Nutrien, our purpose is Feeding the Future and we do so with safety, inclusion, integrity and results as our core values. Nothing is more important than sending our people home safe, every day. Nutrien is a leading provider of agricultural products, services, and solutions. With over 26,000 employees world-wide, we are the largest producer...

  • Production Operator Days 7am-7pm on 2-2-3 Schedule

    4 weeks ago

    Aurora, Colorado, United States Niagara Bottling Full time

    At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water.Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to...

  • Equipment Operator

    2 weeks ago

    Aurora, Colorado, United States Congruex Full time

    Job DescriptionJob DescriptionJob ProfileJob Title: Equipment OperatorPrimary Location: Denver, COEmployment Status: Full Time, Non-ExemptCompensation: $26 - $31/hr.CNS, a Congruex Company, is looking for Equipment Operators to join our construction team. Learn more about our operating unit at: www.Congruex.comWho is CongruexCongruex designs and builds...

  • Operator, Mine Operations

    7 days ago

    Aurora, Colorado, United States Nutrien Full time

    Pay Band: WAGE At Nutrien, our purpose is Feeding the Future and we do so with safety, inclusion, integrity and results as our core values. Nothing is more important than sending our people home safe, every day. Nutrien is a leading provider of agricultural products, services, and solutions. With nearly 25,000 employees world-wide, we are the largest...

  • General Labor

    2 weeks ago

    Aurora, Colorado, United States Malone Workforce Solutions- Palatine, IL Full time

    Job DescriptionJob DescriptionMalone Workforce Solutions is hiring General Laborers/ Machine Operators for full-time positions with a Metal Industrial and Furniture parts fabrication company in Aurora, IL.Apply today to join a friendly team that believes in developing all levels of talent and offers avenues for growthGeneral Labor/ Machine Operator...

  • Operator, Mine Operations

    5 days ago

    Aurora, Colorado, United States Nutrien Full time

    Pay Band: WAGE At Nutrien, our purpose is Feeding the Future and we do so with safety, inclusion, integrity and results as our core values. Nothing is more important than sending our people home safe, every day.Nutrien is a leading provider of agricultural products, services, and solutions. With nearly 25,000 employees world-wide, we are the largest producer...