Diesel Fleet Mechanic Tech II
4 weeks ago
Company:
US0048 Sysco Charlotte, LLCZip Code:
28027Minimum Level of Education:
High School or EquivalentMinimum Years of Experience:
3 YearsEmployment Type:
Full TimeTravel Percentage:
0COMPENSATION INFORMATION:
The pay range provided is not indicative of Sysco's actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factors
JOB SUMMARY
To provide safe, reliable and cost-efficient vehicles by performing quality preventive maintenance inspections and repairs as well as performing expert diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability.
RESPONSIBILITIES
- Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet.
- Perform FAI/CVI (Annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies. (Includes all state-required inspections and frequencies).
- Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any other company-owned equipment.
- Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment.
- Address all Driver Vehicle Inspection Report write ups timely, and efficiently.
- Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems.
- Follow procedures including documenting all work performed on work orders.
- Learn and develop efficiency in Sysco computer programs
- Proficient in electrical meter testing
- Knowledge of controls and electric (DC (distribution center) low voltage
- Electric motor knowledge (DC)
- Complete electrical repairs and welding projects as needed.
QUALIFICATIONS
Education
- Medium / Heavy Duty truck technical training
- High school diploma or GED required
Experience
- 2-year school and 1 year of experience or 3 years of experience in fleet maintenance and repair
- Current and valid driver's license.
Certifications, Licenses, and Registrations
- Annual Inspector Certification, Knowledge, Skills, and Abilities
- Brake Inspector Certification, Knowledge, Skills and Abilities
- ASE certifications; Automotive or Medium/Heavy Duty Trucks (Preferred, Not Required)
- 609 HVAC Certification
Professional Skills
- Working knowledge of computer-based diagnostic software for OEM's and component manufacturers
- Must provide own and provide all tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics
- Expert knowledge and skill of all vehicle systems and components
- Moderate knowledge and skill in diagnosis and repair of electrical systems on all equipment
- Moderate knowledge and skill in Preventive Maintenance Inspections and repair
- Basic knowledge and skill in welding and cutting (gas, electric, MIG, TIG)
- Basic computer skills and knowledge
- Moderate knowledge of all DOT (FMCSA) regulations
- Basic knowledge of OSHA safety regulations
- Basic knowledge of environmental regulations
- The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools, and other shop equipment.
- Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.
- Ability to operate various pieces of equipment
- Ability to stand, sit, walk, bend, reach
- Ability to push/pull
- Ability to lift /carry
- Ability to grasp tools
- Ability to perform Repetitive motion: wrenches and hand tools
Physical Demands
- While performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear.
- The employee is frequently required to sit and reach with hands and arms.
- The employee is frequently required to climb, balance, stoop, kneel, crouch, bend or crawl.
- The employee is occasionally required to sit and must frequently lift and/or move up to 100 lbs.
Work Environment
- While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces.
- The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call.
- The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.).
- The associate is occasionally exposed to high, precarious places and confined spaces.
- The associate is occasionally exposed to fumes or airborne particles.
- The noise level in the work environment is usually moderate.
- Frequently works outdoors.
BENEFITS INFORMATION:
For information on Sysco's Benefits, please visitOVERVIEW:
Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations.
We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We're looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service.
AFFIRMATIVE ACTION STATEMENT:
Applicants must be currently authorized to work in the United States.
We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law.
This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.
-
Licensed Diesel Truck Technician/Mechanic I
1 week ago
Concord, New Hampshire, United States Fleet Jobs Full timePosition Available: Vehicle Maintenance Technician at Penske Truck Leasing Canada Inc.About the Company:Penske is a leading company in the vehicle maintenance industry, providing top-notch trucks, technology, tools, and experts to support your career growth.Job Summary:Are you an experienced and licensed technician seeking a company that values your skills?...
-
Marine Machinery Mechanic
4 weeks ago
Concord, New Hampshire, United States U.S. Army Military Surface Deployment And Distribution Command Full timeDevelop quality assessment plans to evaluate and improve quality of maintenance production and work processes. Ensure the dispatching and operational capability of all Marine Machine equipment at sites to achieve police and firefighting operational requirements. Analyze quality data to detect unsatisfactory trends/conditions and/or weaknesses in the PWS's...
-
Heavy Mobile Equipment Mechanic
1 week ago
Concord, New Hampshire, United States U.S. Army Military Surface Deployment And Distribution Command Full timeMonitor engine disassembly operations (air cooled and/or liquid cooled), V-engines, L-engines, and opposed engines; gas or multi-fuel) to determine the extent of repair and/or rebuild required. Monitor the removal of transmission, disassembly, replacement of defective selector rods, gears, pressure pumps, bearings, clutch discs, pressure plates, bands,...
-
Heavy Mobile Equipment Mechanic
3 weeks ago
Concord, New Hampshire, United States U.S. Army Military Surface Deployment And Distribution Command Full timeMonitor engine disassembly operations (air cooled and/or liquid cooled), V-engines, L-engines, and opposed engines; gas or multi-fuel) to determine the extent of repair and/or rebuild required. Monitor the removal of transmission, disassembly, replacement of defective selector rods, gears, pressure pumps, bearings, clutch discs, pressure plates, bands,...
-
Concord, New Hampshire, United States Alta Equipment Group Inc. Full timeCome work for one of the largest equipment dealers in North America Are you a Technician/Mechanic with diesel, agricultural, or heavy equipment repair experience? If so, then we want you on our teamTechnicians are at the backbone of our organization; therefore, we provide them with the tools and resources to be successful: Manufacturer technical training...
-
15N Avionics Mechanic
1 month ago
Concord, New Hampshire, United States Army National Guard Full timeJob Description:Job DescriptionThe communications system, navigation, and flight controls are just a few examples of the dozens of electrical systems that help pilots keep aircraft safely in flight. As an Avionics Mechanic in the Army National Guard, you will make sure these systems and instruments operate properly. Through training and practice, you will...
-
Facilities and Maintenance Director
1 month ago
Concord, New Hampshire, United States Sysco Full timeCompany: US0048 Sysco Charlotte, LLC Zip Code:28027 Minimum Level of Education:Bachelor's Degree Minimum Years of Experience:7 Years Employment Type:Full Time Travel Percentage: 0 COMPENSATION INFORMATION: The pay range provided is not indicative of Sysco's actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may...
-
Facilities and Maintenance Director
4 weeks ago
Concord, New Hampshire, United States Sysco Full timeCompany: US0048 Sysco Charlotte, LLC Zip Code:28027 Minimum Level of Education:Bachelor's Degree Minimum Years of Experience:7 Years Employment Type:Full Time Travel Percentage: 0 COMPENSATION INFORMATION: The pay range provided is not indicative of Sysco's actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may...
-
Maintenance Technician II or III
2 days ago
Concord, New Hampshire, United States Getinge Full timeAt Getinge we have the passion to perform Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge, our passion is to secure that every person and community have access to the best possible care, offering hospitals and life science institutions products and solutions that aim to...
-
Materials Planner II
1 week ago
Concord, New Hampshire, United States Elbit Systems of America Full timeJob DescriptionThe Materials Planner II will be responsible for all materials planning for assigned products and/or manufacturing cells to meet the guidelines established by the Master Schedule. Purchase a wide variety of nonstandard, specialized and custom equipment and materials requiring knowledge of electronic and/or mechanical product specifications and...
-
Maintenance Technician II or III
1 month ago
Concord, New Hampshire, United States Getinge Full timeAt Getinge we have the passion to perform Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge, our passion is to secure that every person and community have access to the best possible care, offering hospitals and life science institutions products and solutions that aim to...
-
Maintenance Technician II or III
4 weeks ago
Concord, New Hampshire, United States Getinge Full timeAt Getinge we have the passion to perform Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge, our passion is to secure that every person and community have access to the best possible care, offering hospitals and life science institutions products and solutions that aim to...
-
Adjunct Faculty II
1 month ago
Concord, New Hampshire, United States Atrium Health Full timeOverview Job SummaryProvides a quality learning experience for students on a semester basis. Performs instruction and clinical related duties and responsibilities in a timely manner and in accordance with the mission, policies, and procedures of the college.Essential FunctionsImplements current, traditional, and innovative teaching methodologies whether in...
-
Adjunct Faculty II
4 weeks ago
Concord, New Hampshire, United States Atrium Health Full timeOverview Job SummaryProvides a quality learning experience for students on a semester basis. Performs instruction and clinical related duties and responsibilities in a timely manner and in accordance with the mission, policies, and procedures of the college.Essential FunctionsImplements current, traditional, and innovative teaching methodologies whether in...
-
Maintenance Technician II
4 weeks ago
Concord, New Hampshire, United States Great Wolf Lodge Full timePay: $20 per hourThe Engineer 2 oversees the day to day engineering operations in the lodge. This includes but is not limited to project management, general life safety, ordering, working with vendors. Responsible for completing preventative maintenance and repairs through-out the hotel guestrooms, public spaces, equipment, buildings &...
-
Maintenance Technician II
1 month ago
Concord, New Hampshire, United States Great Wolf Lodge Full timePay: $20 per hourThe Engineer 2 oversees the day to day engineering operations in the lodge. This includes but is not limited to project management, general life safety, ordering, working with vendors. Responsible for completing preventative maintenance and repairs through-out the hotel guestrooms, public spaces, equipment, buildings &...
-
English Adjunct Faculty II
4 weeks ago
Concord, New Hampshire, United States Atrium Health Full timeOverview Job SummaryProvides a quality learning experience for students on a semester basis. Performs instruction and clinical related duties and responsibilities in a timely manner and in accordance with the mission, policies, and procedures of the college.Essential FunctionsImplements current, traditional, and innovative teaching methodologies whether in...
-
English Adjunct Faculty II
1 month ago
Concord, New Hampshire, United States Atrium Health Full timeOverview Job SummaryProvides a quality learning experience for students on a semester basis. Performs instruction and clinical related duties and responsibilities in a timely manner and in accordance with the mission, policies, and procedures of the college.Essential FunctionsImplements current, traditional, and innovative teaching methodologies whether in...
-
Electromechanical Inspector II
4 weeks ago
Concord, New Hampshire, United States BAE Systems Full timeJob Description Because of the need for consistent, in-person collaboration and/or the requirement to perform all work onsite due to the nature of this particular role, it will be performed full-time on site. This means work will be conducted on location at a BAE Systems facility 100% of the time.Our employees work on the world's most advanced electronics....
-
Electromechanical Inspector II
1 month ago
Concord, New Hampshire, United States BAE Systems Full timeJob Description Because of the need for consistent, in-person collaboration and/or the requirement to perform all work onsite due to the nature of this particular role, it will be performed full-time on site. This means work will be conducted on location at a BAE Systems facility 100% of the time.Our employees work on the world's most advanced electronics....