Electronic Technician

2 months ago

Stanton, United States Strategic Staffing Solutions Full time

Instrumentation and Electronic Technician


Direct hire

Location: Stanton, TN - on site


As an I&E technician, your job is to repair and install instrumentation and electrical equipment. I&E technicians often focus on systems like plant lightning, thermostat systems, and programmable controllers.


This position is responsible for installing, maintaining, testing, and troubleshooting instrumentation, controls, and electrical/electronic systems within the newly constructed Central Utility Plant located at Ford’s Blue Oval City complex. This is a “journeymen” level position with a high degree of knowledge of instrumentation, controls, low and medium voltage switchgear, transformers, generators, protective relays, and motor control centers. Work is performed under direct supervision of a Plant Manager and performance is reviewed against an established set of goals and Company policies and procedures. Work involves performing some difficult and complex functions requiring a high level of independent judgment, initiative, and discretion.

Plant equipment includes the following: (2) 7.8 MW Solar Taurus 70 gas turbine generators with associated Rentech 161 KPPH Heat Recovery Steam Generator’s with Duct Burners and Fresh Air Firing capability, (4) 75,000 MBH, and (1) 2,000 MBH steam to hot water heat exchangers, economizers, deaerators, boiler feed water pumps, condensate pumps. Also included will be (10) 3,350-ton electric cooling only centrifugal chillers, and (5) 2,245-ton heating/cooling chillers with an associated 10 MM gallon thermal storage tank and a 14 cell, 153,000 gpm cooling tower. Balance of plant equipment includes, air compressors, water treatment systems, pumps, filters, instrumentation, PLC controls and 25/5 kV, 480 V and 125 Vdc electrical systems.


Qualifications

Must have a high school diploma or GED and a minimum of five (5) years of power plant experience in instrument, controls, and electrical maintenance.

Must have knowledge of utility plant mechanical and electrical equipment, including gas turbines, HRSG’s, motors, pumps, mechanical chillers, fluid systems, chemical handling, water treatment systems, pollution control equipment, AC/DC electrical distribution, control systems, and associated maintenance functions.


• Experience with natural gas fired combustion turbines, heat recovery steam generators (HRSG), electrical systems, chilled water systems, compressed air, water softeners and emissions control systems

• Demonstrated knowledge of electrical equipment, electronics, schematics, controls, and instrumentation

• Demonstrated ability to calibrate I&C systems and equipment, including analytic equipment

• Demonstrated ability to configure and operate various test instruments and equipment as necessary to troubleshoot and repair plant equipment including, but not limited to PLC’s, variable frequency drives, motor control centers, transformers, and generators.

• Demonstrated experience with Allen Bradley PLC interfaces

• Ability to coordinate and work with others in a team environment

• Ability to learn and become proficient in all site-specific systems and sub-systems

• Ability to complete site-specific qualification training and periodic testing

• Knowledge of plant safety policies, and procedures, especially in areas such as chemical handling, energy systems, confined spaces, fire suppression, and first aid

• Knowledge of and ability to understand fundamental principles related to physics, mathematics, AC/DC electrical theory, heat transfer, fluid flow, thermal dynamics and chemistry

• Ability to use basic hand tools, portable electric, pneumatic tools, and basic rigging equipment such as winches, hoists, and slings

• Ability to locate, troubleshoot, and correct problems with mechanical and electrical system and ancillary equipment

• Ability to effectively communicate verbally and in writing

• Experience with Computerized Maintenance Management System (CMMS)

• Proficient in Microsoft Office applications (Word, Excel, PowerPoint, and Outlook)


Additional Qualifications

The physical demands characterized here epitomize those that must be met by an employee to properly perform the integral functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. In order to properly perform the integral functions of this job, the employee is required to:

• Frequently stand, walk, or climb and occasionally stoop, kneel or crawl.

• Talk and hear; use hands to fingers, handle and feel; and able to reach with hands and arms extensively.

• Frequently lift objects of up to 35 pounds in weight, occasionally, lift or move objects of up to 50 pounds in weight, and occasionally push or pull objects up to 70 pounds in weight.

• Vision requirements for this position include close vision, color vision and the ability to adjust focus.

While performing the duties of this job, the employee is occasionally exposed to outside weather conditions, including extreme heat/cold, wet and/or humid conditions. The employee is occasionally exposed to fumes or airborne particles and vibration. The employee is regularly exposed to moving mechanical parts and/or machinery. The noise level in the work environment is usually loud.

  • Mobile Equipment Technician

    3 hours ago

    Stanton, Tennessee, United States United Rentals Full time

    Join a Leading Company with Exceptional Opportunities. If you are looking to make a significant impact with a premier equipment rental organization, consider a career with United Rentals. As a Mobile Equipment Technician (Service Tech IV - Field Service), you will leverage your expertise to conduct maintenance and repairs on intricate machinery with minimal...

  • Diesel Technician Mechanic

    2 days ago

    NEW STANTON, United States Ryder System Full time

    Position Description Immediately hiring a Permanent Full Time Experienced Mid-Level Diesel Technician to support our Truck Fleet at Ryder in New Stanton, PA For More Info Call Rachel or Text "New Stanton T2" to 956-231-7283 Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/WelcomeTechs Average Weekly Pay: $1148 ...

  • Diesel Technician Mechanic

    6 days ago

    NEW STANTON, United States Ryder System Full time

    Position Description Immediately hiring a Permanent Full Time Experienced Mid-Level Diesel Technician to support our Truck Fleet at Ryder in New Stanton, PA For More Info Call Rachel or Text "New Stanton T2" to 956-231-7283 Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/WelcomeTechs Average Weekly Pay: $1148 ...

  • Shop Technician

    3 days ago

    New Stanton, United States Westinghouse Electric Company Full time

    Reference #: 17008 Shop Technician 1 in the Instrumentation and Control area assembles, troubleshoots, tests, or maintains circuitry or electronic components according to engineering instructions, technical manuals, or knowledge of electronics, using hand tools, power tools, and soldering iron. The role is an Individual Contributor performing multiple...

  • E&I Technician

    1 month ago

    Stanton, United States Strategic Staffing Solutions Full time

    STRATEGIC STAFFING SOLUTIONS HAS AN OPENING! Job Title: E&I Technician Duration: FTE Location: Stanton, TN - Onsite Salary: $43/HR We are offering a $5,000 signing bonus to the successful candidate. Overview: This position is responsible for installing, maintaining, testing, and troubleshooting instrumentation, controls, and...

  • Become a Mechatronics Expert with Stellar Enterprises

    2 hours ago

    Stanton, California, United States Stellar Enterprises Full time

    Job DescriptionAt Stellar Enterprises, we are seeking a highly skilled Mechatronics Technician to join our team. As a Mechatronics Technician, you will play a critical role in the development and maintenance of our state-of-the-art manufacturing systems.Key Responsibilities:Develop and implement technical solutions to improve manufacturing efficiency and...

  • HVAC Controls Technician

    1 month ago

    Stanton, United States Johnson Controls International Full time

    Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed.  We are committed to make a difference.What we offer:Competitive...

  • I&E Technician

    4 weeks ago

    Stanton, United States DTE ES Operations, LLC Full time

    Job Summary Location: Stanton, TN This position is responsible for installing, maintaining, testing, and troubleshooting instrumentation, controls, and electrical/electronic systems within the newly constructed Central Utility Plant located at Fords Blue Oval City complex. This is a journeymen level position with a high degree of knowledge of...

  • HVAC Controls Technician

    2 weeks ago

    Stanton, United States Johnson Controls International Full time

    Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people - you bring your talent, and we'll give you the space and opportunities to grow and succeed.  We are committed to make a difference.What we offer:Competitive...

  • Financial Support Specialist

    2 weeks ago

    Stanton, California, United States City of Stanton Full time

    APPLICATION DEADLINE:This recruitment is open until filled. Early applications are encouraged.WORK SCHEDULE:4-day workweek (Monday-Thursday)REMOTE WORK:With the approval of the Department Head, the successful candidate may be permitted to work remotely up to 25% of the work week after completing a minimum of six (6) months of employment with satisfactory...

  • HVAC Controls Technician

    3 months ago

    Stanton, United States Johnson Controls International Full time

    Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed.  We are committed to make a difference.What we offer:Competitive...

  • HVAC Controls Technician

    3 months ago

    Stanton, United States Johnson Controls International Full time

    Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive...

  • HVAC Controls Technician

    1 month ago

    Stanton, United States Johnson Controls International Full time

    Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed.  We are committed to make a difference.What we offer:Competitive...

  • HVAC Controls Technician

    3 months ago

    Stanton, United States Johnson Controls International Full time

    Job DescriptionBe part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed.  We are committed to make a difference.What we...

  • Diesel Mechanic

    3 weeks ago

    NEW STANTON, United States Ryder System Full time

    Position Description Immediately hiring a Permanent Full Time Experienced Mid-Level Diesel Technician to support our Truck Fleet at Ryder in New Stanton, PA For More Info Call Rachel or Text "New Stanton T2" to 956-231-7283 Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/WelcomeTechs Average Weekly Pay: $1148 ...

  • Diesel Mechanic

    2 weeks ago

    NEW STANTON, United States Ryder System Full time

    Position Description Immediately hiring a Permanent Full Time Experienced Mid-Level Diesel Technician to support our Truck Fleet at Ryder in New Stanton, PA For More Info Call Rachel or Text "New Stanton T2" to 956-231-7283 Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/WelcomeTechs Average Weekly Pay: $1148 ...

  • HVAC Controls Technician

    3 months ago

    Stanton, TN, US Johnson Controls International Full time

    Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed.  We are committed to make a difference.What we offer:Competitive...