Aerospace Engineer

6 days ago


Edmond, Oklahoma, United States Federal Aviation Administration Full time

SummaryI-Band:
The incumbent serves as an Aerospace Engineer with knowledge and experience in aircraft electrical systems and propulsion aspects needed to conduct research, development, and testing (RD&T) in agency aircraft

J-Band:

This position serves as an Aerospace Engineer (Structural Electrical/Avionics) in Flight Program Operations, Aircraft Maintenance, AJF-2000.This job is open toThe publicU.S.

Citizens, Nationals or those who owe allegiance to the U.S.Individuals with disabilitiesMilitary spousesPeace Corps & AmeriCorps VistaVeterans Clarification from the agencyAlso open to those eligible for 30% or More Disabled and PWD/PWTD.

VRA is not eligible for positions above FG-11 grade level.

DutiesI-Band:

Performs multiple, varying, and complex assignments and plans the implementation of projects/programs under limited direction of a manager, project/program manager, or more experienced engineer.

May act as a contributing specialist on large work activities or as a team leader for single or small work activities.

Applies experience and advanced knowledge of engineering principles, theories, and concepts applicable to his/her discipline to accomplish assignments and to develop plans and techniques to improve programs and policies.

Responsibilities include the preparation of aircraft for the installation of systems requiring airborne and/or ground test, including data recording and support equipment and supports RD&T by developing aircraft configurations for complex and continually changing projects/programs that support the National Airspace System.

Defines, plans, and organizes assigned resources to accomplish organizational objectives. Allocates resources to accomplish small work activities within established schedules.

Work includes complex project components and applied experience and comprehensive scientific knowledge of engineering, engineering technology, and aircraft systems to develop new approaches, concepts, and methodologies to solve complex problems.

Established policies/procedures provide guidance for most assignments, but considerable discretion is allowed to select the most appropriate approach or to recommend new approaches.

Understands how his/her technical area interacts with or is affected by other disciplines and considers the objectives of the major subdivision and LOB/SO when developing, integrating, and implementing solutions to diverse, complex problems.


Typical assignments may include:
system design and integration; extensive research; and shared responsibility for project/program management

J-Band:

The Aerospace Engineer (Electrical/Avionics) position analyzes and applies regulations and policies to overseeing the certification and continued operational safety of aeronautical products, or systems, or components; and is responsible for organizing, planning, conducting and successfully completing type certification/type validation projects, oversight of compliance and safety systems, and for supporting continued operational safety activities of aircraft, aircraft engines, propellers, or appliances in accordance with Title 14, Code of Federal Regulations (14 CFR), hereafter called aviation products.

May act as the principal engineer or as a project/program manager orteam lead for large work activities. The incumbent plans and accomplishes highly complex and challenging projects/programs under the minimal direction of a manager.

The incumbent applies experience and comprehensive knowledge of engineering principles, theories, and concepts applicable to aerospace engineering as well as an understanding of new technologies and methodologies to solve complex problems and develop improved processes for the organization.

Also applies experience and knowledge of risk analysis techniques to analyze and evaluate the safety and reliability of aeronautical products, or systems, or components.

Assures compliance of aircraft and products with the appropriate requirements of 14 CFR and with foreign certification authority regulations governed by bilateral agreements.

Defines and organizes resources to accomplish organizational project/program objectives. Uses allocated resources to accomplish large work activities within established schedules.

Prepares reports and provides required briefings and/or technical presentations within the FAA and to manufacturers, professional organizations and to foreign certification authorities.

The incumbent is a mentor, coach, and role model to less knowledgeable or less experienced engineers and distributes tasking in accordance with management-defined criteria.

Requirements Conditions of EmploymentUS Citizenship is required.
Selective Service Registration is required for males born after 12/31/1959.Designated or Random Drug Testing required.
This position has a positive education requirement. Transcript(s) required.
A one-year probationary period may be required.
Successful completion of a security investigation may be required.
Please Review Required Documents & Additional Information. QualificationsBASIC REQUIREMENTSA.

Degree:
Engineering.

To be acceptable, the program must:
(1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
ORB.

Combination of education and experiencecollege-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.

The adequacy of such background must be demonstrated by one of the following:1.

Professional registration or licensure Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.

Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration.

For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2.

Written Test Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.3.

Specified academic courses Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A.

The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.4.

Related curriculum Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance.

Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

(The above examples of related curricula are not all-inclusive).ANDTo qualify for this position at the FV-I (FG/GS-13) level, in addition to the Basic Requirements you must demonstrate in your application that you possess at least one year of specialized experience equivalent to FV
  • H (FG/GS 12) level.

Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position.

Specialized Experience includes experience in the design, test, or regulatory compliance in one or more of the following disciplines; avionics systems (e.g. communication/navigation/surveillance systems) or electrical systems (e.g.

electrical power generating and distribution systems).To qualify for this position at the FV-J (FG/GS-14) level, in addition to the Basic Requirements you must demonstrate in your application that you possess at least one year of specialized experience equivalent to FV-I (FG/GS-13) level.

Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to perform successfully the duties of the position.

Specialized Experience includes experience in certification or conducting safety evaluations of an aircraft's structural, electronics and/or avionics systems.
Applicants should include examples of specialized experience in their work history.
Qualifications must be met by the closing date of the announcement.

EducationThis position has a positive education requirement:

Applicants must submit a copy of their college or university transcripts(s) and certificates by the closing date of announcement to verify qualifications.

If selected, an official transcript will be required prior to appointment.

You may upload these documents with your application in USAJOBS or fax it to fax number provided in the announcement (please include announcement number on each page).Failure to do so will result in loss of consideration.

Schools must be accredited by an accrediting institution recognized by the U.S. Department of Education.

Accreditation may be verified at the following website:
education must be evaluated by a private professional organization specializing in interpretation of foreign education credentials or an accredited U.S. educational institution in terms of equivalence to a degree acquired at an American college or university. A copy of the evaluation results must be included, otherwise your foreign education will not be considered.
See Qualifications Required.

Information Regarding KSA's:


As a part of the Federal-Wide Hiring Reform Initiative (streamlining the hiring process), the FAA is committed to eliminating the use of the Knowledge, Skills and Ability (KSA) narratives from the initial application in the hiring process for all announcements.

Therefore, as an applicant for this announcement, you are NOT required to provide a narrative response in the text box listed below each KSA.In lieu of providing a KSA narrative response in the text box listed below each Knowledge Skills and Abilities (KSAs), in your work history, please include information that provides specific examples of how you meet the response level or answer you chose for each KSA.

Your work history examples should be specific and clearly reflect the highest level of ability.

Your KSA answers will be evaluated further to validate whether the level that you selected is appropriate based on the work history and experience you provided.

Your answers may be adjusted by a Human Resource Specialist as appropriate.

Eligible applicants meeting the minimum qualification requirements and selective factor(s), if applicable, may be further evaluated on the KSAs and Other Factors listed in the announcement.

Based on this evaluation, applicants will be placed in one of the following categories:
score order, category grouping, or alphabetical and referred to the selecting official for consideration.
Preview Job QuestionnaireMake sure your resume includes detailed information to support your qualifications and answers to the job questionnaire.
Additional informationWe may use this vacancy to fill other similar vacant positions.
Position may be subject to a background investigation.
A one-year probationary period may be required.

The person selected for this position may be required to file a financial disclosure statement within 30 days of entry on duty.

FAA policy limits certain outside employment and financial investments in aviation-related companies. U.S.

Department of Transportation strives to ensure that equity, transparency, accountability, collaboration, and communication permeate all that we do for the betterment of the Department, the traveling public, and our nation.

As such, DOT values a highly diverse workforce of persons who promote a culture of belonging by respecting the personal dignity and worth of each individual and fostering a positive environment where all feel safe and welcome.

If these commitments coincide with your personal ideals and professional aspirations, please consider joining the DOT family.
This position is covered by the Department of Transportation's Drug and Alcohol Testing Program. Any applicant tentatively selected for this position will be subject to pre-employment or pre-appointment drug screening. Persons occupying a "testing designated position (TDP)" will be subject to random drug and/or alcohol testing.

NOTES:
1) Applicants must apply online to receive consideration for this vacancy announcement. Faxed, mailed or emailed applications cannot be accepted.2) Please ensure you answer all questions and follow all instructions carefully.

Errors or omissions may impact your rating or may result in you not being considered for the job.3) Some, none, or all candidates may be interviewed.4) Position(s) to be filled at the I-Band and/or J-Band within AJF-2122, duty location of Oklahoma City, OK.5) This position has a positive education requirement.

If you have never served in a Federal Professional Engineering Series you must UPLOAD a copy of your transcripts with your application or email to 9-AMC-AHF-) To confirm receipt of documents, Please contact Jeff Westlake at ) This position is covered by the FAA Core Compensation plan.

Additional information about core compensation is available on the following website:
) Additional information regarding living in Oklahoma can be found at is a bargaining unit position.

This position is represented by NATCA:
Engineers & Architects

Links to Important Information:
Locality Pay , COLABenefitsA career with the U.S. government provides employees with a comprehensive benefits package.

As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding.

Opens in a new windowLearn more about federal benefits.

Review our benefitsEligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent.

Contact the hiring agency for more information on the specific benefits offered.

How You Will Be EvaluatedYou will be evaluated for this job based on how well you meet the qualifications above.


IMPORTANT:

Applicants may be rated on the extent and quality of experience, education, and training relevant to the duties of the position(s).

All answers provided in the on-line process must be substantiated.
Ensure that your application package/resume supports your responses.
BenefitsA career with the U.S. government provides employees with a comprehensive benefits package.

As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding.

Opens in a new windowLearn more about federal benefits.

Review our benefitsEligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent.

Contact the hiring agency for more information on the specific benefits offered.

Required DocumentsAs a new or existing federal employee, you and your family may have access to a range of benefits.

Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee.

You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies.

SF-50 (Notification of Personnel Action), DD Form 214, and college transcript(s) as indicated below will be accepted in combination with your on-line application and must be uploaded or emailed to 9-AMC-AHF- on or before the closing date of this announcement.

All submitted documents should reference the announcement number.

If you are requesting consideration for Persons with Disabilities/Targeted Disabilities Appointment:

You must provide proof of disability documentation (i.e.

Schedule A Letter) that:

  • May be a letter or other documentation on official stationery or letterhead with an official signature.
  • Clearly states that you are eligible for appointment under the PWD/PWTD hiring authority or a Schedule A appointment authority, outlined in 5 CFR Section u).
  • Must indicate that the individual is indeed a person with an intellectual disability, severe physical disability, or psychiatric disability. Does not need to detail medical history.30% or More Disabled Veteran, see below.

This position has a positive education requirement; college transcripts are required for ALL candidates newly appointed to the FAA in the 0800 (Engineering) series.

College transcripts must be submitted from current FAA employees applying for internal vacancies if they have never held a position in the 0800 (Engineering) series with the FAA.College transcripts are not required from current FAA employees who are currently occupying an 0800 (Engineering) series.

If selected, official transcripts are required prior to employment.

All Veterans:

If you are claiming veterans' preference, you must submit either a DD Form 214 Certificate of Release or Discharge from Active Duty (Member 4 Copy or equivalent), or a document from the armed forces certifying that within 120 days you are expected to be discharged or released from active duty service under honorable conditions.

If you are claiming 10 point preference, you must also submit a completed SF-15, Application for 10-Point Veteran's Preference, and supporting documents outlined on the SF-15.

Documents must be uploaded or faxed to the Servicing Human Resource Management Office listed in this announcement and all documents must be received by the closing date of the announcement.

If you fail to submit documentation, you will be assessed as a non-veteran.

If you are claiming 10 point preference but fail to submit the supporting documents outlined on the SF-15, you will be tentatively assessed as a 5 point preference eligible provided your DD Form 214 reflects that you have the service required to qualify for preference.

Documents must be uploaded or faxed to the Servicing Human Resource Management Office listed in this announcement and all documents must be received by the closing date of the announcement.

If you fail to submit documentation, you will be assessed as a non-veteran.

Veterans currently on active duty claiming veterans' preference:

You will be granted tentative preference if you submit a document from the armed forces certifying that within 120 days you are expected to be discharged or released from active duty service under honorable conditions and your application shows that you have the required service.

Prior to being appointed, you must provide to the Servicing Human Resource Management Office a DD Form 214 documenting discharge/release and showing that the service was honorable or general.

If you are on terminal leave, you must provide documentation certifying authorized terminal leave.

Forms:

SF-15: Application for 10-Point Veteran PreferenceIf you are relying on your education to meet qualification requirements:Education must be accredited by an accrediting institution recognized by the U.S.

Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees fromschools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

How to ApplyYou must apply online to receive consideration. Your application must be submitted by 11:59 PM Eastern Time on the Close Date for it to be accepted.

If you are applying for positions associated with FAA registers, your application must be submitted at the time a referral list is created in order to receive consideration for positions associated with a register.

IN DESCRIBING YOUR WORK EXPERIENCE AND/OR EDUCATION, PLEASE BE CLEAR AND SPECIFIC REGARDING YOUR EXPERIENCE OR EDUCATION.We strongly encourage applicants to utilize the USAJOBS resume builder in the creation of resumes.

Please ensure EACH work history includes ALL of the following information:

Job Title (include series and grade if Federal Job)Duties (be specific in describing your duties)Employer's name and addressSupervisor name and phone numberStart and end dates including month and year (e.g.

June 2007 to April 2008)Full-time or part-time status (include hours worked per week)SalaryDetermining length of General or Specialized Experience is dependent on the above information and failure to provide ALL of this information may result in a finding of ineligible.

You may upload completed documents to your USAJOBS Account. This will provide you the opportunity to utilize the uploaded information again when applying for future vacancies. Please see this guide, Document Upload Guide, for more information on uploading and re-using the documents in your applications.
Agency contact informationJeff WestlakePhone Emailjeffrey.k.govAddressFederal Aviation AdministrationAAC Regional HR Services Branch6500 S.

Macarthur Blvd, HQ Room 155 AHF-S210 Oklahoma City, OK 73169USNext stepsOnce we receive your complete application, the Human Resources Office will conduct an evaluation of your qualifications.

Eligible and qualified candidates will be referred to the hiring manager for consideration. You will be contacted directly if selected for an interview.

For instructions on how to check the status of your application, please go to:
USAJOBS Help Guide.
Important
  • If you make any changes to your application, you must resubmit it.
If you make changes to your application and do not resubmit it, your changes will not be considered part of your application package, and only your previously submitted application will be evaluated.

All qualified applicants will be considered regardless of political affiliation, race, color, religion, national origin, gender, sexual orientation, marital status, age, disability, or other non-merit factors.

DOT provides reasonable accommodations to applicants with disabilities.

If you need a reasonable accommodation for any part of the application and hiring process, please notify the agency contact listed in the Agency Contact Information section of this announcement or the hiring manager.

An employee with a disability must notify the decision-maker of the accommodation request. Job applicants and employees are required to follow up oral requests in writing. Decisions on granting reasonable accommodation will be made on a case-by-case basis.

Additional information on reasonable accommodations procedures or on EEO Programs is available on Office of Civil Rights (ACR) or by contacting the local FAA Civil Rights Office.

Fair and TransparentThe Federal hiring process is set up to be fair and transparent. Please read the following guidance.
Criminal history inquiriesEqual Employment Opportunity (EEO) PolicyFinancial suitabilityNew employee probationary periodPrivacy ActReasonable accommodation policySelective ServiceSignature and false statementsSocial security number requestRequired Documents

SF-50 (Notification of Personnel Action), DD Form 214, and college transcript(s) as indicated below will be accepted in combination with your on-line application and must be uploaded or emailed to 9-AMC-AHF- on or before the closing date of this announcement.

All submitted documents should reference the announcement number.

If you are requesting consideration for Persons with Disabilities/Targeted Disabilities Appointment:

You must provide proof of disability documentation (i.e.

Schedule A Letter) that:

  • May be a letter or other documentation on official stationery or letterhead with an official signature.
  • Clearly states that you are eligible for appointment under the PWD/PWTD hiring authority or a Schedule A appointment authority, outlined in 5 CFR Section u).
  • Must indicate that the individual is indeed a person with an intellectual disability, severe physical disability, or psychiatric disability. Does not need to detail medical history.30% or More Disabled Veteran, see below.

This position has a positive education requirement; college transcripts are required for ALL candidates newly appointed to the FAA in the 0800 (Engineering) series.

College transcripts must be submitted from current FAA employees applying for internal vacancies if they have never held a position in the 0800 (Engineering) series with the FAA.College transcripts are not required from current FAA employees who are currently occupying an 0800 (Engineering) series.

If selected, official transcripts are required prior to employment.

All Veterans:

If you are claiming veterans' preference, you must submit either a DD Form 214 Certificate of Release or Discharge from Active Duty (Member 4 Copy or equivalent), or a document from the armed forces certifying that within 120 days you are expected to be discharged or released from active duty service under honorable conditions.

If you are claiming 10 point preference, you must also submit a completed SF-15, Application for 10-Point Veteran's Preference, and supporting documents outlined on the SF-15.

Documents must be uploaded or faxed to the Servicing Human Resource Management Office listed in this announcement and all documents must be received by the closing date of the announcement.

If you fail to submit documentation, you will be assessed as a non-veteran.

If you are claiming 10 point preference but fail to submit the supporting documents outlined on the SF-15, you will be tentatively assessed as a 5 point preference eligible provided your DD Form 214 reflects that you have the service required to qualify for preference.

Documents must be uploaded or faxed to the Servicing Human Resource Management Office listed in this announcement and all documents must be received by the closing date of the announcement.

If you fail to submit documentation, you will be assessed as a non-veteran.

Veterans currently on active duty claiming veterans' preference:

You will be granted tentative preference if you submit a document from the armed forces certifying that within 120 days you are expected to be discharged or released from active duty service under honorable conditions and your application shows that you have the required service.

Prior to being appointed, you must provide to the Servicing Human Resource Management Office a DD Form 214 documenting discharge/release and showing that the service was honorable or general.

If you are on terminal leave, you must provide documentation certifying authorized terminal leave.

Forms:

SF-15: Application for 10-Point Veteran PreferenceIf you are relying on your education to meet qualification requirements:Education must be accredited by an accrediting institution recognized by the U.S.

Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees fromschools accredited by accrediting institutions recognized by the U.S. Department of Education.

Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

How to ApplyYou must apply online to receive consideration. Your application must be submitted by 11:59 PM Eastern Time on the Close Date for it to be accepted.

If you are applying for positions associated with FAA registers, your application must be submitted at the time a referral list is created in order to receive consideration for positions associated with a register.

IN DESCRIBING YOUR WORK EXPERIENCE AND/OR EDUCATION, PLEASE BE CLEAR AND SPECIFIC REGARDING YOUR EXPERIENCE OR EDUCATION.We strongly encourage applicants to utilize the USAJOBS resume builder in the creation of resumes.

Please ensure EACH work history includes ALL of the following information:

Job Title (include series and grade if Federal Job)Duties (be specific in describing your duties)Employer's name and addressSupervisor name and phone numberStart and end dates including month and year (e.g.

June 2007 to April 2008)Full-time or part-time status (include hours worked per week)SalaryDetermining length of General or Specialized Experience is dependent on the above information and failure to provide ALL of this information may result in a finding of ineligible.

You may upload completed documents to your USAJOBS Account. This will provide you the opportunity to utilize the uploaded information again when applying for future vacancies. Please see this guide, Document Upload Guide, for more information on uploading and re-using the documents in your applications.
Agency contact informationJeff WestlakePhone Emailjeffrey.k.govAddressFederal Aviation AdministrationAAC Regional HR Services Branch6500 S.

Macarthur Blvd, HQ Room 155 AHF-S210 Oklahoma City, OK 73169USNext stepsOnce we receive your complete application, the Human Resources Office will conduct an evaluation of your qualifications.

Eligible and qualified candidates will be referred to the hiring manager for consideration. You will be contacted directly if selected for an interview.

For instructions on how to check the status of your application, please go to:
USAJOBS Help Guide.
Important
  • If you make any changes to your application, you must resubmit it.
If you make changes to your application and do not resubmit it, your changes will not be considered part of your application package, and only your previously submitted application will be evaluated.

All qualified applicants will be considered regardless of political affiliation, race, color, religion, national origin, gender, sexual orientation, marital status, age, disability, or other non-merit factors.

DOT provides reasonable accommodations to applicants with disabilities.

If you need a reasonable accommodation for any part of the application and hiring process, please notify the agency contact listed in the Agency Contact Information section of this announcement or the hiring manager.

An employee with a disability must notify the decision-maker of the accommodation request. Job applicants and employees are required to follow up oral requests in writing. Decisions on granting reasonable accommodation will be made on a case-by-case basis.

Additional information on reasonable accommodations procedures or on EEO Programs is available on Office of Civil Rights (ACR) or by contacting the local FAA Civil Rights Office.

Fair & TransparentThe Federal hiring process is set up to be fair and transparent. Please read the following guidance.
Criminal history inquiriesEqual Employment Opportunity (EEO) PolicyFinancial suitabilityNew employee probationary periodPrivacy ActReasonable accommodation policySelective ServiceSignature and false statementsSocial security number request

  • Edmond, United States Lincoln Search Consultants Inc Full time

    Job Description Demonstrated experience in systems engineering modeling of UAV systems, including creation of all associated work products Model Based development of System Architecture Modeling and Simulation System Interfaces Responsible for the integration of the capabilities into the UAS Work with the engineering leads to define use cases, operational...


  • Edmond, United States Lincoln Search Consultants Inc Full time

    Job Description Demonstrated experience in systems engineering modeling of UAV systems, including creation of all associated work products Model Based development of System Architecture Modeling and Simulation System Interfaces Responsible for the integration of the capabilities into the UAS Work with the engineering leads to define use cases, operational...


  • Edmond, United States Lincoln Search Consultants Inc Full time

    Safety & Reliability Engineer About Us Our client is a transatlantic cutting-edge aerospace company developing solar powered aircraft solutions capable of achieving perpetual flight with heavy, and powerful payload capacity. Utilizing technology based upon the longest continuous renewably powered flight program in history, this fast-growing startup is...


  • Edmond, United States Gables Search Group Full time

    Safety & Reliability EngineerAbout Us Our client is a transatlantic cutting-edge aerospace company developing solar powered aircraft solutions capable of achieving perpetual flight with heavy, and powerful payload capacity. Utilizing technology based upon the longest continuous renewably powered flight program in history, this fast-growing startup is...


  • Edmond, United States Gables Search Group Full time

    Safety & Reliability EngineerAbout Us Our client is a transatlantic cutting-edge aerospace company developing solar powered aircraft solutions capable of achieving perpetual flight with heavy, and powerful payload capacity. Utilizing technology based upon the longest continuous renewably powered flight program in history, this fast-growing startup is...


  • Edmond, United States Your Hiring Coaches Full time

    Safety & Reliability Engineer About Us Our client is a transatlantic cutting-edge aerospace company developing solar powered aircraft solutions capable of achieving perpetual flight with heavy, and powerful payload capacity. Utilizing technology based upon the longest continuous renewably powered flight program in history, this fast-growing startup is...


  • Edmond, United States Management Business Solutions Full time

    System Engineering Developer About Us Our client is a transatlantic cutting-edge aerospace company developing solar powered aircraft solutions capable of achieving perpetual flight with heavy, and powerful payload capacity. Utilizing technology based upon the longest continuous renewably powered flight program in history, this fast-growing startup is...


  • Edmond, United States Lincoln Search Consultants Inc Full time

    System Engineering Developer About Us Our client is a transatlantic cutting-edge aerospace company developing solar powered aircraft solutions capable of achieving perpetual flight with heavy, and powerful payload capacity. Utilizing technology based upon the longest continuous renewably powered flight program in history, this fast-growing startup is...


  • Edmond, United States United States Air Force Full time

    ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to...

  • System Test Engineer

    2 months ago


    Edmond, United States Lincoln Search Consultants Inc Full time

    System Test Engineer About Us Our client is a transatlantic cutting-edge aerospace company developing solar powered aircraft solutions capable of achieving perpetual flight with heavy, and powerful payload capacity. Utilizing technology based upon the longest continuous renewably powered flight program in history, this fast-growing startup is developing...

  • System Test Engineer

    3 weeks ago


    Edmond, United States Lincoln Search Consultants Inc Full time

    System Test Engineer About Us Our client is a transatlantic cutting-edge aerospace company developing solar powered aircraft solutions capable of achieving perpetual flight with heavy, and powerful payload capacity. Utilizing technology based upon the longest continuous renewably powered flight program in history, this fast-growing startup is developing...


  • Edmond, United States TRIGO ADR Americas Full time

    Production-2 TQSThe Program Manager will support for multiple aeronautics programs. The PM's job is to provide onsite support at various suppliers facilities in order to mitigate any and all supply chain risks and constraints. The position requires a thorough understanding of both Airframe and Major Systems manufacturing procedures and production processes....

  • Design Engineer

    4 weeks ago


    Edmond, United States Butler America Full time

    Design EngineerLocation: Oklahoma City, OKJob ID: #69153Pay Range: $40-60 DOE 6 month contractCitizenship Requirement: US Citizen. If Dual Citizen, a review of citizenships will be required. Min years of experience: Minimum 3 years primary structure design experience. Degree Requirements: BS in Engineering Detailed Job Description: Design Engineer...

  • VMS Avionics Engineer

    1 month ago


    Edmond, United States Gables Search Group Full time

    VMS Avionics EngineerAbout Us Our client is a transatlantic cutting-edge aerospace company developing solar powered aircraft solutions capable of achieving perpetual flight with heavy, and powerful payload capacity. Utilizing technology based upon the longest continuous renewably powered flight program in history, this fast-growing startup is developing a...


  • Edmond, United States Gables Search Group Full time

    VMS Avionics EngineerAbout Us Our client is a transatlantic cutting-edge aerospace company developing solar powered aircraft solutions capable of achieving perpetual flight with heavy, and powerful payload capacity. Utilizing technology based upon the longest continuous renewably powered flight program in history, this fast-growing startup is developing a...


  • Edmond, United States Management Business Solutions Full time

    Embedded Software Engineer Job Description Our Client is looking for motivated, process-oriented and creative software engineers to join the embedded software team to develop safety-critical code for the UAV and ground station. The job includes full lifecycle development following DO-178C objectives in a fast-paced, collaborative environment. Software is...


  • Edmond, United States Management Business Solutions Full time

    Embedded Software Engineer Job Description Our Client is looking for motivated, process-oriented and creative software engineers to join the embedded software team to develop safety-critical code for the UAV and ground station. The job includes full lifecycle development following DO-178C objectives in a fast-paced, collaborative environment. Software is...


  • Edmond, United States Lincoln Search Consultants Inc Full time

    Modeling and Simulation Engineer Job Description Our Client is looking for a Modeling and Simulation Engineer to join our System Simulation team. The job includes full lifecycle software development of in-house simulators. System Simulation team delivers a diverse line of products and services to support the testing activities. This range of products...


  • Edmond, United States Gables Search Group Full time

    Modeling and Simulation EngineerJob Description Our Client is looking for a Modeling and Simulation Engineer to join our System Simulation team. The job includes full lifecycle software development of in-house simulators. System Simulation team delivers a diverse line of products and services to support the testing activities. This range of products varies...


  • Edmond, United States Gables Search Group Full time

    Modeling and Simulation EngineerJob Description Our Client is looking for a Modeling and Simulation Engineer to join our System Simulation team. The job includes full lifecycle software development of in-house simulators. System Simulation team delivers a diverse line of products and services to support the testing activities. This range of products varies...