Welder

2 weeks ago

Port Allen, Louisiana, United States Turner Industries Full time
Job DescriptionJob Description

APPLICANT MUST BE ABLE to Weld TIG/Stick and TIG/Fluxcore, and Pass the Welding Tests.


THIS JOB IS AT THE PIPE FAB SHOP IN PORT ALLEN, LA

Job Description:

Works under the direction of a foreman, interprets weld maps and weld procedures, identifies material types and welds pipe spools.

Functional Requirements:

Read and sign off on JSA prior to starting shift; pass required welding test(s) in a 6G position, GTAW, GTAW/SMAW, GTAW/FCAW, GMAW and must be familiar with weld map, weld procedure, weld process numbers, filler metal selection guide, preheat & welding symbols, material color codes, weld wire color codes, etc.; grind tacks with pneumatic grinders; aware of surroundings; assist in setting up and taking down pipe spools; maintains a clean and safe work environment at all times.

Qualification Standards:

Preferably one (2) to four (4) years of experience in specified skill; Pre-employment qualification test if applicable & required Welding tests; Post-offer drug/alcohol screen and physical evaluation; Hazard Communication orientation/test; Turner Industries Group Indoctrination; OSHA approved corrective eye wear (Z87); Job site orientation; Job site "Personal Protective Equipment" requirements (hearing protection, safety glasses, long sleeve shirt, gloves, steel toe boots, etc); Applicant/employee must not pose a direct threat to the health or safety of such individual or others in the work place.

Physical Involvement:

Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools equipment, etc.; standing; sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; crawling; seeing with or without correction; hearing with or without correction

Mental Involvement:

Employee may be required to do the following: following set procedures and standards; applying basic mathematical skills; planning work and selecting proper tools; comparing and understanding differences in the size, shape and form of lines, figures and objects; picturing and evaluating solid objects from drawing or diagrams using standards that can be measured or checked; following oral and/or written directions, plans and blueprints; reading; writing; ability to recognize and report safety hazards

Work Environment Factors:

  • Location: industrial maintenance and construction sites, equipment yard and/or fabrication shop
  • Mobility Barriers to Access Job Site: uneven ground level; obstructed pathways; work performed at low and/or high elevations; work performed in confined areas
  • Climatic/Environmental Conditions at Job Site: predominately outdoor climate; may be exposed to extreme hot or cold weather, excessive humidity, rain, etc.; various noise levels caused by tools, machinery, equipment, etc.; potential exposure to chemical substances

Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law.

SPECIAL WARNING: PLEASE BE AWARE THAT YOU WILL NOT HAVE TO PAY FOR THIS DRUG/ALCOHOL TEST. PLEASE DO NOT SEND MONEY OR ANYTHING OF VALUE TO PERSONS WHO STATE THAT YOU HAVE TO PAY ANY AMOUNT OF MONEY OR GET A DEBIT/CASH CARD FOR THE PURPOSES OF THE DRUG/ALCOHOL TEST. IF YOU HAVE ANY QUESTIONS ABOUT THIS PLEASE CONTACT OUR HIRING OFFICE AT -INDUSTRIES.COM. BEFORE AGREEING TO PAY FOR A DRUG/ALCOHOL TEST.

Job Posted by ApplicantPro

  • Specialty Welder

    2 weeks ago

    Port Sulphur, Louisiana, United States Brown & Root Industrial Services Full time

    Brown & Root Industrial Services LA 23 [Fabricator] As a Specialty Welder at Brown & Root, you'll: Lay out, align and weld fabricated, cast and forged components to assemble structural forms; Select type and size of pipe or other related materials and equipment according to specifications; Select equipment and plan layouts, assembly, and welding; Bolt, clamp...

  • Welder - Combo

    2 weeks ago

    Port Allen, United States Cajun Industries Full time

    More information about this job: Overview The Combo Welder must be trained in a variety of welding processes, including arc welding and oxy-fuel welding depending on the material being used. Must possess the ability to set up equipment and weld either pipe, plate or structural steel using arc, gas-shielded arc or gas welding equipment. Will work from...

  • Welder - Tack

    4 weeks ago

    Port Allen, United States Cajun Industries Full time

    More information about this job: Overview The Tack Welder will ensure tack welds are made strong enough to sustain the stressors affecting them. Will hold in place the assembled components, complement the function of a fixture and permit the assembly removal from it if necessary. Controls and contrasts component movement and distortion of the structure...

  • Welder

    4 weeks ago

    Port Orchard, United States Tournesol Siteworks LLC Full time

    Job DescriptionJob DescriptionWelderDepartment: Production – Metal FabricationReports to: Production ManagerLocation: Fontana. CAExperience: 2 to 4 yearsJob Type: Full Time (non-exempt)Education: Min. High School DiplomaAbout UsTournesol Siteworks is a national manufacturer of landscape products for green buildings based in the San Francisco Bay Area....

  • Maintenance Welder

    3 weeks ago

    Port Neches, United States Indorama Ventures Full time

    Job Description: Indorama Ventures - Indovinya is currently looking for a dynamic individual to work as a Pipefitter/Welder located at our Port Neches, Texas facility. Welder general duties - expected to be able to weld in all positions (flat, vertical, and overhead) using stick, tig, mig, and Flux Core. Welders will work with carbon steel, stainless, and...

  • Maintenance Welder

    3 weeks ago

    Port Neches, United States Indorama Ventures Full time

    Job Description:Indorama Ventures - Indovinya is currently looking for a dynamic individual to work as aPipefitter/Welder located at our Port Neches, Texas facility.Welder general duties - expected to be able to weld in all positions (flat, vertical, and overhead) using stick, tig, mig, and Flux Core. Welders will work with carbon steel, stainless, and...

  • Welder

    2 weeks ago

    Port Orchard, United States Tournesol Siteworks LLC Full time

    Job DescriptionJob DescriptionWelderDepartment: Production – Metal FabricationReports to: Production ManagerLocation: Port Orchard, WAExperience: 2 to 4 yearsJob Type: Full Time (non-exempt)Education: Min. High School DiplomaAbout UsTournesol Siteworks is a national manufacturer of landscape products for green buildings based in the San Francisco Bay Area....

  • TIG Welder

    4 weeks ago

    Allen, United States RUK Consulting Full time

    Job DescriptionJob DescriptionJob Description:Our client is looking for an Senior Welder to perform laser department-related duties as assigned by team leader/ supervisor.Essential Duties and Responsibilities:• Perform weld related duties as assigned by team leader / supervisor.• Maintain compliance with all company policies and procedures.• Assume...

  • TIG Welder

    4 weeks ago

    Allen, United States RUK Consulting Full time

    Job DescriptionJob DescriptionJob Description:Our client is looking for an Senior Welder to perform laser department-related duties as assigned by team leader/ supervisor.Essential Duties and Responsibilities:• Perform weld related duties as assigned by team leader / supervisor.• Maintain compliance with all company policies and procedures.• Assume...

  • Mig Welder

    2 weeks ago

    Port Clinton, United States Aerotek Full time

    **Job Title: MIG Welder****Job Description**We are seeking a skilled MIG Welder to join our team. This role entails interpreting mechanical drawings, performing quality checks, welding company parts made of carbon steel, and designing and building simple jigs and fixtures. You will also be responsible for mentoring Welder I’s on welding and quality control...

  • Mig Welder

    2 weeks ago

    Port Clinton, United States Aerotek Full time

    **Job Title: MIG Welder** **Job Description** We are seeking a skilled MIG Welder to join our team. This role entails interpreting mechanical drawings, performing quality checks, welding company parts made of carbon steel, and designing and building simple jigs and fixtures. You will also be responsible for mentoring Welder Is on welding and quality control...

  • Rig Welder

    4 weeks ago

    Port Lavaca, United States Precision Group Full time

    Essential Duties and Responsibilities include the following. Other duties may be assigned. Welders read Isometric drawings Take measurements Plan layouts and procedures Determine what welding equipment and methods to use based on requirements Set-up components to specifications Prepare and align parts for welding Join components, repair holes and cut through...

  • Combination Welder>

    4 weeks ago

    Port Sulphur, United States Brown & Root Industrial Services Full time

    Brown & Root Industrial Services - 20200 LA 23 [Fabricator] As a Combination Welder at Brown & Root, you'll: Be certified on multi-process pipe being proficient in SMAW, GTAW and GMAW welding processes; Lay out, align and weld fabricated, cast and forged components to assemble structural forms; Select type and size of pipe or other related materials and...

  • Rig Welder

    7 days ago

    Port Lavaca, United States Precision Group Full time

    Essential Duties and Responsibilities include the following. Other duties may be assigned. Welders read Isometric drawings Take measurements Plan layouts and procedures Determine what welding equipment and methods to use based on requirements Set-up components to specifications Prepare and align parts for welding Join components, repair holes and cut through...

  • Welder

    3 weeks ago

    Port Allen, United States Turner Industries Full time

    Job DescriptionJob DescriptionAPPLICANT MUST BE ABLE to Weld TIG/Stick and TIG/Fluxcore, and Pass the Welding Tests. THIS JOB IS AT THE PIPE FAB SHOP IN PORT ALLEN, LAJob Description: Works under the direction of a foreman, interprets weld maps and weld procedures, identifies material types and welds pipe spools.Functional Requirements:Read and sign off on...

  • Welder

    4 weeks ago

    Port Allen, United States Turner Industries Full time

    Job DescriptionJob DescriptionAPPLICANT MUST BE ABLE to Weld TIG/Stick and TIG/Fluxcore, and Pass the Welding Tests. THIS JOB IS AT THE PIPE FAB SHOP IN PORT ALLEN, LAJob Description: Works under the direction of a foreman, interprets weld maps and weld procedures, identifies material types and welds pipe spools.Functional Requirements:Read and sign off on...

  • Welder 1/C

    2 weeks ago

    Port St Joe, United States Eastern Shipbuilding Group Full time

    Job Title Welder 1/C Location Port St Joe, FL US (Primary) Job Type Full-time Education High School / GED Travel None Security Clearance Required None Job Description Title: Welder 1st Class Job Summary: Layout, fit, and weld fabricated cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells,...

  • Welder - Rig

    2 weeks ago

    Port Sulphur, United States Cajun Industries LLC Full time

    Overview The Rig Welder will support rigs in all operations that require cutting or welding. Will work from blueprints, sketches, specifications and produce quality work with reasonable efficiency. Will provide own welding machine and power tools to perform the job such as a grinder, porta-band, torch, or gauge. Must learn and understand all safety...

  • Combo Welder 1

    6 days ago

    Port Arthur, United States Zachry Group Full time

    Job DescriptionPosition Summary A Combination Welder will weld, fabricate and assist pipe fitters in installation of varying types of industrial pipe into the projects piping systems. Qualification Highlights Must have the ability to weld in 2g, 4g, and 6g conditions. Must be able to Stick and Tig weld on Pipe. Must have current applicable welding...

  • Welder Combination

    2 weeks ago

    Port Sulphur, United States Zachry Group Full time

    Job DescriptionA Combination Welder will weld, fabricate and assist pipe fitters in the installation of varying types of industrial pipe (carbon, stainless, and chrome) into the project's piping systems.Responsibilities Selects equipment and plans layouts, assembly, and welding applying knowledge of geometry, physical properties of metal machining, weld...

  • Welder Combination

    4 weeks ago

    Port Sulphur, United States Zachry Group Full time

    Job Description A Combination Welder will weld, fabricate and assist pipe fitters in the installation of varying types of industrial pipe (carbon, stainless, and chrome) into the project's piping systems. Responsibilities Selects equipment and plans layouts, assembly, and welding applying knowledge of geometry, physical properties of metal machining, weld...