Sheet Metal Press Brake Operator

2 weeks ago

St Petersburg, United States Plasma-Therm Full time
Sheet metal press brake operator. Bend and finish custom parts/products that meet customer specifications. Organized self-starter.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
  • Examines specifications of the customer's order using drawings, work orders, and/or set up sheets to determine the characteristics of the finished item, materials to be used, and machine setup requirements.
  • Bends parts as determined by work order specifications.
  • Retrieves correct materials, prepares workbench, and sets up appropriate tools to complete the job.
  • Examines work piece visually, by touch, or using tape rule, calipers, or gauges to ensure product meets desired standards.
  • Completes first article documentation as required.
  • Enters production quantities and labor hours into ERP system.
  • Maintains condition of work area (i.e., free of trash, product in correct location, etc.).
  • May perform various other fabrication duties including sawing, deburring, hardware installation, etc. as necessary to satisfy customer requirements and meet specifications.
  • Other Duties as assigned.
  • It is every employee's responsibility to be aware of and adhere to the applicable Safety & Health, Quality and Environmental Process of Rev-Tech Manufacturing Solutions.

SUPERVISORY RESPONSIBILITIES: Should be willing and able to provide basic direction to fellow team members and encourage a cooperative team environment.
QUALIFICATIONS:
  • High School diploma or GED required.
  • Trade school, technical school, or military education preferred.
  • Minimum 5 years of experience bending sheet metal required.

SKILLS AND ABILITIES:
  • Ability to interpret blueprints, drawings, schematics, technical procedures, and other related material.
  • Ability to read, interprets, and follows safety rules, operating and maintenance instructions, and procedure manuals.
  • Ability to follow written and verbal directions to perform to the quality standards.
  • Ability to apply basic mathematical skills to solve technical problems.
  • Utilize knowledge of all metallic and non-metallic materials.

WORK ENVIRONMENT and PHYSICAL DEMANDS:
  • The normal work environment is typical of a machine shop with many moving parts, and is typically noisy.
  • While performing the regular duties of the position, the incumbent will be exposed to moving mechanical parts and risk of electrical shock.
  • Ability to stand for prolonged periods of time.
  • Ability to lift up to 50 pounds; over 50 pounds with assistance.
  • Safety Steel toed shoes are required.
  • Ear plugs, gloves, back braces, safety glasses are provided by the company.

Rev-Tech Manufacturing Solutions is an equal employment opportunity employer, in accordance with applicable federal and state laws for qualified employees and applicants without regard to race, religion, color, sex, age, national origin, sexual orientation, gender identity, marital status, genetic information, protected veteran or disability status. When requested and necessary, we provide reasonable accommodations for qualified individuals with disabilities.

About Plasma-Therm:

Plasma-Therm designs and manufacturers plasma-processing systems that are used in fabricating advanced electronics and electro-mechanical devices. Our systems are employed in many industries, from renewable energy to consumer electronics to space science.
Since its founding in 1975, Plasma-Therm has been recognized for technology leadership, with dozens of U.S. and foreign patents, and more than 30 awards for superior products and customer service.
Our company is committed to innovation, excellence, and partnership. Join a team that looks beyond yesterday's routine to tomorrow's solutions.

  • Sheet Metal Press Brake Operator

    1 month ago

    St. Petersburg, United States Plasma-Therm Full time

    Sheet metal press brake operator. Bend and finish custom parts/products that meet customer specifications. Organized self-starter.ESSENTIAL DUTIES AND RESPONSIBILITIES:Examines specifications of the customer’s order using drawings, work orders, and/or set up sheets to determine the characteristics of the finished item, materials to be used, and machine...

  • Sheet Metal Press Brake Operator

    4 weeks ago

    St. Petersburg, United States Plasma-Therm Full time

    Sheet metal press brake operator. Bend and finish custom parts/products that meet customer specifications. Organized self-starter.ESSENTIAL DUTIES AND RESPONSIBILITIES:Examines specifications of the customer’s order using drawings, work orders, and/or set up sheets to determine the characteristics of the finished item, materials to be used, and machine...

  • Press Brake Set Up Operator

    2 weeks ago

    St Paul, United States Aerotek Full time

    **Job Title: Press Brake Set Up Operator** **Job Description** You will be responsible for setting up and operating AMADA Press Brakes, including models HG 8025, HD 8025 NT, and HRB. You will use your expertise in reading blueprints, drawings, and sketches to fabricate high-quality sheet metal parts and components tailored to customer specifications. Our...

  • Brake Press Operator

    3 weeks ago

    St Paul, United States Randstad North America, Inc. Full time

    Randstad Roseville has partnered with a metal manufacturer in St. Paul. Looking for a skilled machine operator to join the team as a Break Press operator. Must be comfortable working in a loud and dirty environment to produce necessary products. Shif Press Operator, Brake Press, Operator, Press, Manufacturing, Staffing

  • Press Brake Operator

    4 weeks ago

    Saint Petersburg, United States Rev-Tech Manufacturing Solutions LLC Full time

    Job DescriptionJob DescriptionDescription:DescriptionSheet metal press brake operator. Bend and finish custom parts/products that meet customer specifications. Organized self-starter. ESSENTIAL DUTIES AND RESPONSIBILITIES:Examines specifications of the customer’s order using drawings, work orders, and/or set up sheets to determine the characteristics of...

  • Brake Press Operator

    1 month ago

    Petersburg, United States Ballard Marine Construction Full time

    Onyett is seeking an experienced Brake Press Operator responsible for forming various types of steel for bucket and blade liners, forming metal into different degrees, and forming channels. These responsibilities include shaping metal, maintaining press brake, reading blueprints, completing inspections, packaging, lifting, and moving of parts & inventory,...

  • Brake Press Operator

    4 weeks ago

    Petersburg, United States Ballard Marine Construction Full time

    Onyett is seeking an experienced Brake Press Operator responsible for forming various types of steel for bucket and blade liners, forming metal into different degrees, and forming channels. These responsibilities include shaping metal, maintaining press brake, reading blueprints, completing inspections, packaging, lifting, and moving of parts & inventory,...

  • Brake Press Operator

    2 months ago

    St Paul, United States Randstad North America, Inc. Full time

    As a brake press operator you will prepare and operate brake press machines to blue print or mechanical drawing specifications. You will need an understanding of measurements, calipers and micrometers. You will load raw materials and parts onto machi Press Operator, Brake Press, Operator, Press, Manufacturing, Staffing

  • Brake Press Operator

    1 month ago

    St Paul, United States Randstad North America, Inc. Full time

    As a brake press operator you will prepare and operate brake press machines to blue print or mechanical drawing specifications. You will need an understanding of measurements, calipers and micrometers. You will load raw materials and parts onto machi Press Operator, Brake Press, Operator, Press, Manufacturing, Staffing

  • Brake Press Operator

    1 month ago

    Petersburg, United States Ballard Marine Construction Full time

    Onyett is seeking an experienced Brake Press Operator responsible for forming various types of steel for bucket and blade liners, forming metal into different degrees, and forming channels. These responsibilities include shaping metal, maintaining press brake, reading blueprints, completing inspections, packaging, lifting, and moving of parts & inventory,...

  • Brake Press Operator

    4 weeks ago

    Petersburg, United States Ballard Marine Construction Full time

    Onyett is seeking an experienced Brake Press Operator responsible for forming various types of steel for bucket and blade liners, forming metal into different degrees, and forming channels. These responsibilities include shaping metal, maintaining press brake, reading blueprints, completing inspections, packaging, lifting, and moving of parts & inventory,...

  • Sheet Metal Fabricator

    3 weeks ago

    St Cloud, United States Aerotek Full time

    **Sheet Metal Fabricator****Now Hiring!****Position Summary**As a Sheet Metal Fabricator, your responsibilities include creating HVAC fittings and ductwork by reading blueprints and fabrication sheets to lay out and assemble the necessary fittings. You are also responsible for performing service and repair work on fleet vehicles, trailers, and equipment....

  • brake press operator_

    12 hours ago

    St Paul, United States Randstad Full time

    brake press operator. + st paul , minnesota + posted june 5, 2024 **job details** summary + $20 per hour + temporary + category production occupations + reference1029249-1 job details Randstad Roseville has partnered with a metal manufacturer in St. Paul. Looking for a skilled machine operator to join the team as a Break Press operator. Must be comfortable...

  • Sheet Metal Fabricator

    2 weeks ago

    St Cloud, United States Aerotek Full time

    Sheet Metal FabricatorNow Hiring! Position Summary As a Sheet Metal Fabricator, your responsibilities include creating HVAC fittings and ductwork by reading blueprints and fabrication sheets to lay out and assemble the necessary fittings. You are also responsible for performing service and repair work on fleet vehicles, trailers, and equipment. Being...

  • CNC Press Brake Operator

    4 weeks ago

    St Paul Park, United States STROM MINNESOTA Full time

    Strom Engineering Minnesota is looking for an experienced CNC Press Brake Operator to work for our client company located in St. Paul, Minnesota. Position is on 1st shift 7:am-3:30pm M-F Pay between: $18.00-25.00 hr. DOQ SUMMARY Sets up and operates CNC Press Brakes ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. The Plant Manager may...

  • CNC Press Break Set-up Operator

    4 weeks ago

    St Paul, United States Award Staffing Full time

    About the Opportunity:∙ Job Title: CNC Press Brake Press Set-Up Operator∙ Pay: $28/Hour∙ Location: Mendota Heights, MN ∙ Schedule: 1st Shift, Mon-Thurs 6AM-3PM and Fri 6AM-12PM Daily functions: Operates a press brake to manufacture tools, equipment, and other components from sheet metal or metal plates.  Prepares, sets up, and adjusts press brake...

  • CNC Press Break Set-up Operator

    4 weeks ago

    St Paul, United States The Judge Group Full time

    About the Opportunity: ? Job Title: CNC Press Brake Press Set-Up Operator ? Pay: $28/Hour ? Location: Mendota Heights, MN ? Schedule: 1st Shift, Mon-Thurs 6AM-3PM and Fri 6AM-12PM Daily functions: Operates a press brake to manufacture tools, equipment, and other components from sheet metal or metal plates. Prepares, sets up, and adjusts press brake as...

  • CNC Press Break Set-up Operator

    3 weeks ago

    St Paul, United States Award Staffing Full time

    About the Opportunity: ? Job Title: CNC Press Brake Press Set-Up Operator ? Pay: $28/Hour ? Location: Mendota Heights, MN ? Schedule: 1st Shift, Mon-Thurs 6AM-3PM and Fri 6AM-12PM Daily functions: Operates a press brake to manufacture tools, equipment, and other components from sheet metal or metal plates. Prepares, sets up, and adjusts press brake as...

  • Press Operator-Metal

    3 weeks ago

    St Marys, United States Manpower Inc Full time

    1st Shift Press Operator- $20 per hourOur client in St. Marys, Ohio is looking for hardworking, motivated talent to join their team. Don't wait... apply today!Whats in it for you? $20 per hour 6:00 AM - 2:00 PM M-F Paid training Clean and safe work environment Temp to hireWhat will you be doing? Properly operating previously set up machines following given...

  • Press Brake/Set Up- Full Benefits.

    4 weeks ago

    St Paul, United States Aerotek Full time

    **$25-$35/hr Press Brake/Brake Press candidates.** **Looking for Press-brake operators and Set up level candidates** **Willing to train individuals who can operate to set up.** **Room for growth!** **Apply Now!** **Benefits:** + Life insurance + Long/short disability + Dental/Vision/401K + Frequent performance raises. **Description:** + Employee will be...