Maintenance Technician

Found in: beBee S US - 2 weeks ago


Crystal Lake, United States Sysco Full time

Company:US1292 Buckhead Meat Midwest Inc.-Illinois Division

Zip Code:60140

Minimum Level of Education:High School or Equivalent

Minimum Years of Experience:3 Years

Employment Type:Full Time

Travel Percentage:0

COMPENSATION INFORMATION:

The pay range provided is not indicative of Sysco's actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factors

Previous experience in food manufacturing and emphasis in grind or hamburger forming is preferred / Hours: Monday through Friday, 6am -2:30pm, OT as required, Occasional Sundays / Pay Range: $26-32

JOB SUMMARY:

The Production Technician II role is essential for supporting the operations team and is responsible for troubleshooting equipment issues and performing preventive maintenance on production equipment throughout the facility with limited supervision. Participate in 5S and Lean manufacturing activities including material handling improvements, production line configuration, and safety procedures.

This role must learn industry leading maintenance practices and methodologies to increase equipment safety, uptime, and performance.

DUTIES AND RESPONSIBILITIES:

Supports company and industry standard safety policies and procedures - OSHA, NEC, NFPA, USDA, FDA, etc.

Perform inspections and complete preventive/predictive maintenance tasks on production and process utility equipment to increase quality, safety, and overall equipment reliability.

Diagnose and repair production and process utility equipment deficiencies and failures; to include, but not limited to mechanical, electrical, pneumatic, and hydraulic equipment. May include facility repairs as needed.

Learn and use continuous improvements tools and methods to improve equipment reliability, may include root cause analysis (RCA), failure mode analysis (FMA) and make recommendations to prevent recurrence.

Work and train with OEM technicians during production equipment rebuilds, line moves, installations, setups, calibrations, and emergency repairs

Read and interpret equipment manuals and work orders to perform required maintenance and service.

Responsible for effectively managing assigned planned work, unplanned failures, and work orders in a high-paced, fluid work environment.

Responsible for accurately and concisely logging work orders in computerized maintenance management system (CMMS) to properly track maintenance and equipment performance metrics; to include labor, equipment uptime, preventive maintenance compliance, MTTR, MTBF, part usage, etc.

QUALIFICATIONS:

Experience

Required

Three (3) plus years of maintenance experience in a manufacturing setting.

Experience troubleshooting mechanical systems, electrical components, hydraulics, pneumatics, pumps, material handling equipment, etc.

Preferred

Experience using lockout tagout, job hazard analysis, hot work permits, confined space, etc. 1-3 years of food processing maintenance experience is a preferred.

Experience working in a food processing environment and familiar with USDA, FDA, and SQF policies and procedures.

Education

High School Diploma or GED

Certificates, Licenses, and Registrations:

Required - Must provide own tools (diagnostic equipment and major tools provided by Sysco) necessary to perform all maintenance repair and diagnostics.

Preferred - Formal training in equipment maintenance repair, installation, and troubleshooting of electrical equipment is highly desired.

Skills

Moderate knowledge of OSHA safety regulations.

Moderate knowledge of environmental regulations

Basic computer skills and knowledge

Moderate knowledge and skill in Preventive Maintenance Inspections and repair

Moderate knowledge and skill in diagnosis and repair of mechanical, electrical, pneumatic and hydraulic systems

Moderate knowledge and skill with a multi-meter and infrared thermometer.

Ability to operate a forklift and scissor lift

Ability to read and interpret maintenance manuals

Ability to read, analyze and interpret technical procedures, and processes

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals

Ability to work both alone and in a team environment

Ability to manage and prioritize multiple work orders in a fluid and dynamic environment

Ability concisely report and escalate equipment repair statuses and timeframes

Basic knowledge in PLC, VFD/VSD, and relay logic is preferred.

Moderate knowledge and skill in welding and cutting (gas, electric, MIG, TIG) is preferred.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

The employee is occasionally required to sit and must frequently lift heavy items.

The employee is Repair work requires excellent hand and finger dexterity used for wrenches, hand tools and other shop equipment

Ability to operate various pieces of equipment

Ability to stand, sit, walk, bend, reach

Ability to push/pull

Ability to lift /carry

Ability to grasp tools

Ability to perform Repetitive motion: wrenches and hand tools

Workin.



  • Crystal Lake, United States WernerCo - Crystal Lake Full time

    Job DescriptionJob DescriptionAre you a skilled and motivated Maintenance Technician with a passion for ensuring operational excellence? We are seeking a talented individual to join our dynamic team and contribute to the success of our Maintenance Department. As a Maintenance Technician, you will play a crucial role in maintaining and enhancing the...


  • Crystal Lake, United States Path Engineering Full time

    Job DescriptionJob DescriptionRoleAs a Maintenance Technician (also known as Maintenance Engineer, Maintenance Mechanic), you'll play a pivotal role in maintaining and enhancing the efficiency of our industrial machinery. You'll work closely with supervisors to complete maintenance tasks, demonstrate operational knowledge of industrial machinery,...


  • Crystal Lake, United States Fitness Machine Technicians of Northwest Chicago Full time

    Job DescriptionJob DescriptionBenefits/PerksWork attire paid for by the companyPaid trainingPotential performance-based compensation opportunitiesClimate-controlled work environmentGrowth and advancement opportunitiesYear-round workCompany OverviewFitness Machine Technicians is a leader in residential and commercial exercise equipment service. We are the...


  • Lake County, United States Align Communities, LLC Full time

    Job DescriptionJob DescriptionAlign Communities, an entrepreneurial and fast-growing multifamily resident services business based in Winter Park, Florida is seeking a highly skilled and reliable Multi-Family Maintenance Technician to join our team. The ideal candidate will have a strong background in property maintenance, with a focus on multi-family...

  • General Cleaner>

    5 days ago


    Crystal Springs, United States Diversified Maintenance Full time

    Diversified Maintenance - JobID: J3M1DP73DRR2KFPLGGN [Cleaning Technician] As a General Cleaner at Diversified Maintenance, you'll: Dust, wipe, and spot clean all surfaces; Vacuum, mop, and wet mop designated areas; Clean entire restroom by utilizing disinfectants and bathroom cleaners, restock restroom supplies as needed, remove trash, clean fixtures,...


  • Avon Lake, United States Crucial Link Group Full time

    Job DescriptionJob DescriptionCrucial Link is hiring in Avon Lake forIndustrial Maintenance Technician$22-25/hr, based on experience55 hours each week - built in OTMonday - Friday 7:00am - 5:30pmSaturday 7:00am - NoonIndividuals with all Criminal Histories are encouraged to apply.Candidates must be able to pass a drug test. Industrial Maintenance...


  • Lower Lake, United States Alchemy 29 Full time

    Job DescriptionJob DescriptionJob title: Maintenance TechnicianReports to: Maintenance ManagerSalary Range: $20 per hourSchedule: Monday through Friday 7:30 AM to 4:00 PM.Job Summary: The company is a startup; and as such, employees are expected to take on additional responsibilities, in addition to their initial job duties, on an as-needed basis, while...


  • Lake Zurich, United States Path Engineering Full time

    Job DescriptionJob DescriptionRoleAs a Maintenance Technician (also known as Equipment Maintenance Specialist, Maintenance Mechanic), you'll inspect, repair, and maintain manufacturing equipment, particularly Computer Numeric Control (CNC) Machines. You'll ensure all Safety Standards and processes are consistent with established goals for quality,...

  • Maintenance Technician

    Found in: Appcast US C2 - 6 days ago


    Salt Lake City, United States ConsultNet Full time

    Job Title: Maintenance TechnicianLocation: Salt Lake City, UTDuration: Direct hire, full time Pay range: $25-$28/hr W2 DOE Shift: 3rd shift, 10:00pm to 6:30amJob Responsibilities:The Maintenance Technician is responsible for maintaining, servicing, and improving the injection molding and auxiliary equipmentby troubleshooting in an effectively, maintaining...


  • Forest Lake, United States Running Aces Casino & Racetrack Full time

    Job DescriptionJob DescriptionBuilding Maintenance TechnicianBuilding Maintenance TechnicianHIRING IMMEDIATELY Location: Running Aces Casino Hotel Racetrack - 15201 Running Aces Blvd, Columbus, MN 55025Schedule: Full time position. Shifts include rotating days and nights. Weekends and holidays included.Perks: Benefits (full time), 401k (full & part time)Our...

  • Maintenance Technician

    Found in: beBee jobs US - 6 days ago


    Ottawa Lake, United States Archer Daniels Midland Company (ADM) Full time

    Maintenance Technician - Ottawa Lake, MIADM GrainThis is a full-time, hourly position.Job Responsibilities: Perform non-scheduled & preventive maintenance of all facility equipment and buildingsPerform and direct installation/revision of plant and facility equipment, with aide of lower-level mechanics or contractorsTroubleshoot electrical and electronic...


  • Lake Charles, United States Vintage Realty Company Full time

    Job DescriptionJob DescriptionThe Maintenance Technician position is responsible for maintaining the physical integrity of the community at all times. The successful candidate will have a minimum of 2 years of maintenance related experience including but not limited to; plumbing, electrical, HVAC, and carpentry. Weekend availability and call out time on a...


  • Lake Zurich, United States Geremarie Corporation Full time

    Job DescriptionJob Description**Maintenance Technician**Geremarie, a Division of Patrick Industries, is a manufacturer of high precision aluminum component products serving different industries throughout the United States including (RV, Industrial, Marine and Medical). Job Summary: The Maintenance Technician will inspect and repair, or identify for outside...

  • Maintenance Technician

    Found in: Careerbuilder One Red US C2 - 2 weeks ago


    Walled Lake, MI 48390, United States Regal Entertainment Group Full time

    Regal Entertainment Group - JobID: 40b08e80-f99d-4ddd-be9a-73e9993b2d00 [Maintenance Worker] As a Maintenance Technician at Regal Entertainment, you'll: Perform minor repairs in all areas of the theatre including projection booth such as change out fixtures in the booth, repair fan motors, etc; Ensure all auditorium seats are in good working and condition;...

  • Maintenance Technician

    Found in: Careerbuilder One Red US C2 - 2 weeks ago


    South Lake Tahoe, CA 96150, United States Vail Resorts, Inc. Full time

    Vail Resorts, Inc. - JobID: 97C0EED10E1A4D4883E82A5CAD08D720 [Maintenance Worker] As a Maintenance Technician at Vail Resorts, you'll: Diagnose and repair most electrical and plumbing malfunctions that would normally occur within a home or small business; Perform minor electrical, plumbing and general building maintenance and tasks assigned by supervisor;...

  • Maintenance Technician

    Found in: Resume Library US A2 - 6 days ago


    Salt Lake City, Utah, United States FPI Management, Inc. Full time

    Job Description The Maintenance Technician is responsible for the upkeep and maintenance of apartment homes, buildings, and grounds, and performs highly diversified duties to include but not limited to: repairing flooring, drywall, and appliances; troubleshooting and repairing plumbing, electrical, safety and security systems (lighting, locks, smoke/CO2...


  • Salt Lake City, United States CVG Properties Inc. Full time

    Job DescriptionJob DescriptionWe are actively searching for a skilled and enthusiastic Apartment Maintenance Technician to join the CVG Properties team in Salt Lake City to provide great service to our Boutique Multifamily/Townhome Communities (approx. 200 units over six communities).If you want to join a property management TEAM that is focused on providing...


  • Lake City, United States Opportunity Living Full time

    Job DescriptionJob DescriptionJob Purpose of Facilities Technician: $2,000 HIRING BONUS!Carry out general maintenance and transportation functions in order to best serve the needs of the clients of Opportunity Living.Duties and Responsibilities:Assist with all phases of client transportation which includes days, evenings, and weekendsProvide general...


  • Lake City, United States Opportunity Living Full time

    Job DescriptionJob DescriptionJob Purpose of Facilities Technician: $2,000 HIRING BONUS!Carry out general maintenance and transportation functions in order to best serve the needs of the clients of Opportunity Living.Duties and Responsibilities:Assist with all phases of client transportation which includes days, evenings, and weekendsProvide general...


  • Lake City, United States Remedy Intelligent Staffing Full time

    Job DescriptionJob DescriptionRemedy is pleased to be partnering with a well-established customer manufacturer in the greater Lake City, PA area as they embark on a search for a skilled Mold Maintenance Technician. This Mold Maintenance Technician will be responsible for safety, disassembly, cleaning and maintaining molds as well as assisting with...