![Amentum](https://media.trabajo.org/img/noimg.jpg)
Traveling Aircraft Sheetmetal Mechanic II
2 months ago
The Traveling Aircraft Mechanic II (Sheetmetal) performs the full range of military tactical aircraft maintenance and maintains repairs and modifies aircraft structures and structural components of moderate difficulty.
Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.
Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation.
Applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.
Requires working knowledge of technical publications.
The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
Must be able to prioritize workload to maintain schedules on assigned projects.
Removes and installs aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.
Services and lubricates aircraft and subsystems.
Safely prepares aircraft for inspections and maintenance checks and services.
Performs scheduled inspections and assists in performing special inspections.
Performs limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.
Uses and performs operator maintenance on tools, special tools and aircraft ground support equipment.
Applies comprehensive technical expertise to solve moderate problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.
Uses a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.
Uses a knowledge of electrical theory and of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
Participates in maintenance test flights and operation checks as required.
Uses a working knowledge of technical publications and the Government STAMIS to make entries in aircraft logs and records.
Inspect all required aeronautical type maintenance to be performed by Aircraft Mechanic I.
When assigned to operate Flexible Engine Diagnostic System (FEDS). Shall have Federal Aviation Administration (FAA) Powerplant License. If no FAA Powerplant License, then shall have minimum five years documented as a
Flexible Engine Diagnostic System (FEDS) operator.
When designated shall obtain DoD EPA Refrigerant Processing Certificate Section 608 Technician Certification (Universal) or Minimum Type II.
May be designated as a Foreign Object Elimination/Foreign Object Debris (FOE/FOD) Program Administrator.
As qualified and when required can perform non-crew member duties.
When qualified and as assigned for crane operator duties shall have three years of crane operation related experience and shall comply with Occupational Safety & Health Administration (OSHA) 1926 Safety and Health Regulations for Construction, Subpart: CC Cranes & Derricks in Construction 1926.1427 Operator qualification and Certification.
When selected, qualified and trained IAW contact requirements will perform aircraft condition evaluations (ACE) inspection duties.
When required can use Respiratory Protective Equipment (RPE) for job duties.
Participate in maintenance test flights and operation checks as required.
Minimum Requirements:
Valid up-to-date A&P license; And Two (2) years aviation maintenance experience, Three (3)years rotary wing aircraft experience, and Two (2) of the years on the assigned Mission Design Series (UH60, AH64, and/or CH47).
All experience must be within the Five (5) most recent years as required.
If no A&P, - Must have the Three (3) years aviation maintenance experience; consisting of Three (3) years rotary wing aircraft experience, and Two (2) years on the assigned MDS (UH60, AH64, and/or CH47).
All experience must be within the Five (5) most recent years as required.
Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship is required for facility credentials/authorization at this work site.
Tools are Required; must provide own tool and Tool box. All tools must be shadowed and etched with PID.
Travel Team- Must be available to Travel up to 75% of the time, as operationally required.
Knowledge & Skills
Must be able to read, write and communicate effectively in English
Must be able to type using a standard keyboard to communicate through e-mail and software applications.
Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
Broad knowledge of aircraft sheet metal/structural modifications and repair.
Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
Working knowledge of technical publications and Logistics Information Systems.
Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.
Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.
Shall possess the level of experience necessary to inspect all required aeronautical type maintenance to be performed by skill class Mechanic I and must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions.
Shall have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
Shall have a working knowledge of making entries in aircraft logbooks & records, military technical publications, and the Army's Unit Level Logistics Aviation Information System, ULLS-AE.
The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
All mechanics assigned to perform maintenance on FAA certified aircraft must meet FAA requirements
When assigned to Engine Specialized Repair Activity, must hold a valid (current) FAA Powerplant license.
Shall have a thorough knowledge of aircraft mechanical component troubleshooting, diagnosing problems, repair procedures and replacement of parts: requires broad knowledge of aircraft sheet metal/structural modifications and repair.
Shall have basic knowledge of electrical theory.
Physical Requirements/Working Environment
Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.
Must be able to climb stairs, ramps, ladders, and work stands.
Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.
May be required to lift heavy objects whose weight may exceed 50 pounds.
Will be required to handle dirty parts and lubricants.
Will be required to wear proper Personal Protective Equipment (PPE).
Must be able to pass a Respirator Physical and Fit Test qualification.
May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.
Must be able to lift/push/pull minimum of 50 pounds.
May work in maintenance shop or outside.
Must be able to work in a shop where the environment is drafty, noisy, and dirty.
May be exposed to extreme noise from operating equipment.
May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.
Travel
Requires travel domestically and internationally on short notice, to austere environments, under harsh living conditions.
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.
Labor Law Posters
EEO including Disability/Protected Veterans
-
Aircraft Mechanic 1
1 month ago
Fort Campbell, United States Amentum Full timeThe Aircraft Mechanic 1 - Sheetmetal - Maintenance fabricates, installs, and maintains in good repair the sheet-metal equipment and fixtures (such as machine guards, grease pans, shelves, lockers, tanks, ventilators, chutes, ducts, metal roofing) of an establishment. Work involves most of the following: planning and laying out all types of sheet-metal...
-
Aircraft Mechanic II
3 weeks ago
Fort Riley North, Kansas, United States Amentum Full timeThe Aircraft Mechanic II (Sheetmetal / Structural Specialty - UH-60/AH-64/CH-47) maintains repairs and modifies aircraft structures and structural components of moderate difficulty.Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.Remove and install...
-
Fort Bragg, United States Amentum Full timeThe Aircraft Mechanic I (UH60, AH64 and/or CH47) is responsible for: replacing or repairing worn or damaged components using hand tools, gauges, and testing equipment; reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of...
-
Aircraft Sheetmetal Mechanic 1
3 months ago
Fort Bragg, United States Amentum Full timeThe Aircraft Sheetmetal Mechanic I, maintenance fabricates, installs and maintains in good repair the sheet-metal equipment and fixtures (such as machine guards, grease pans, shelves, lockers, tanks, ventilators, chutes, ducts, metal roofing) of an establishment. Work involves most of the following: planning and laying out all types of sheet-metal...
-
Aircraft Mechanic A&P
1 week ago
Fort McDowell, United States Gulfstream Aerospace Corporation Careers Full timeJob DescriptionRS Sheetmetal Tech Sr - Sign-On Bonus and Relocation Available in GAC MesaUnique Skills:P145 MRO structures/sheetmetal repair and maintenance experience or military aviation structures/sheetmetal repair and maintenance experience preferred Education and Experience RequirementsHigh School Diploma or GED required. 4 years of sheetmetal...
-
Aircraft Component Technician
2 weeks ago
Fort Worth, United States Gulfstream Aerospace Corporation Full timeAircraft Component Technician in GAC Texas ROUnique Skills:Preferred experience with aircraft structures performing close tolerance drilling, riveting, and corrosion removal. Able to perform match drilling, skin trimming, and reaming operations. Ability to work with aircraft blueprints, maintenance manuals, and electronic maintenance...
-
Aircraft Component Technician
4 weeks ago
Fort Worth, United States Gulfstream Aerospace Corporation Full timeAircraft Component Technician (Batteries) in GAC Texas ROUnique Skills:Preferred experience working with aircraft lead acid batteries. Ability to work with aircraft maintenance manuals and electronic maintenance documentation. Education and Experience RequirementsHigh School Diploma or GED required. A&P license, FCC license, or NCATT cert preferred.. ...
-
Aircraft Mechanic I
3 months ago
Fort Campbell, United States Lockheed Martin Full timeDescription:The aircraft mechanic I maintains and troubleshoots malfunctions on the MH-47G SOF peculiar aircraft, as it pertains to avionics systems, sub-systems, communications, navigation systems, weapons, aircraft survivability equipment and electrical systems. This mechanic will be required to repair and replace aircraft wiring, replaces aircraft...
-
Aircraft Component Technician
3 weeks ago
Fort Worth, Texas, United States Gulfstream Aerospace Corporation Full timeAircraft Component Technician in GAC Texas ROUnique Skills:Preferred experience with aircraft structures performing close tolerance drilling, riveting, and corrosion removal. Able to perform match drilling, skin trimming, and reaming operations. Ability to work with aircraft blueprints, maintenance manuals, and electronic maintenance documentation.Education...
-
Aircraft Component Technician
4 weeks ago
Fort Worth, United States Gulfstream Aerospace Corporation Full timeAircraft Component Technician (Hydraulics) in GAC Texas RO Unique Skills: Preferred experience working in a hydraulic lab. Experience working with actuators, reservoirs, and test bench. Ability to read and interpret aircraft maintenance manuals and use electronic maintenance documentation. Education and Experience Requirements High School Diploma or GED...
-
Aircraft Component Technician
4 weeks ago
Fort Worth, United States Gulfstream Aerospace Corporation Full timeAircraft Component Technician (Hydraulics) in GAC Texas ROUnique Skills:Preferred experience working in a hydraulic lab. Experience working with actuators, reservoirs, and test bench. Ability to read and interpret aircraft maintenance manuals and use electronic maintenance documentation. Education and Experience RequirementsHigh School Diploma or GED...
-
Aircraft Component Technician
3 days ago
Fort Worth, United States Gulfstream Aerospace Corporation Full timeAircraft Component Technician (Hydraulics) in GAC Texas RO (Fort Worth)Unique Skills:Preferred experience working in a hydraulic lab. Experience working with actuators, reservoirs, and test bench. Ability to read and interpret aircraft maintenance manuals and use electronic maintenance documentation. Education and Experience RequirementsHigh School...
-
Aircraft Component Technician
4 weeks ago
Fort Worth, Texas, United States Gulfstream Aerospace Corporation Full timeAircraft Component Technician (Hydraulics) in GAC Texas ROUnique Skills:Preferred experience working in a hydraulic lab. Experience working with actuators, reservoirs, and test bench. Ability to read and interpret aircraft maintenance manuals and use electronic maintenance documentation.Education and Experience RequirementsHigh School Diploma or GED...
-
Aircraft Component Technician
2 days ago
Fort Worth, United States Gulfstream Aerospace Corporation Full timeAircraft Component Technician (Wheels & Brakes) in GAC Texas RO (Fort Worth)Unique Skills:Preferred experience working with aircraft wheels and brakes. Experience performing tire changes, repairs, corrosion removal, and overhauls. Ability to work with aircraft maintenance manuals and electronic documentation. Education and Experience RequirementsHigh...
-
Aircraft Mechanic I
2 weeks ago
Fort Riley, United States Amentum Full timeThe Aircraft Mechanic I (Sheetmetal/Structural Specialty) troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. Repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components...
-
Aircraft Mechanic II
2 months ago
Fort Riley, United States Amentum Full timeThe Aircraft Mechanic II (Sheetmetal / Structural Specialty - UH-60/AH-64/CH-47) maintains repairs and modifies aircraft structures and structural components of moderate difficulty. Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Remove and...
-
Aircraft Component Technician
4 weeks ago
Fort Worth, Texas, United States Gulfstream Aerospace Corporation Full timeAircraft Component Technician (Wheels & Brakes) in GAC Texas ROUnique Skills:Experience working with aircraft wheels and brakes. Experience performing tire changes, repairs, corrosion removal, and overhauls. Ability to work with aircraft maintenance manuals and electronic documentation.Education and Experience RequirementsHigh School Diploma or GED required....
-
Aircraft Component Technician
1 day ago
Fort Worth, United States Gulfstream Aerospace Corporation Full timeAircraft Component Technician (Batteries) in GAC Texas RO (Fort Worth)Unique Skills:Preferred experience working with aircraft lead acid batteries. Ability to work with aircraft maintenance manuals and electronic maintenance documentation. Education and Experience RequirementsHigh School Diploma or GED required. Able to interpret blueprints, engrg...
-
Aircraft Component Technician
2 days ago
Fort Worth, United States Gulfstream Aerospace Corporation Full timeAircraft Component Technician (Wheels & Brakes) in GAC Texas RO (Fort Worth)Unique Skills:Experience working with aircraft wheels and brakes. Experience performing tire changes, repairs, corrosion removal, and overhauls. Ability to work with aircraft maintenance manuals and electronic documentation. Education and Experience RequirementsHigh School...
-
Aircraft Component Technician
4 weeks ago
Fort Worth, United States Gulfstream Aerospace Corporation Full timeAircraft Component Technician (Wheels & Brakes) in GAC Texas ROUnique Skills:Experience working with aircraft wheels and brakes. Experience performing tire changes, repairs, corrosion removal, and overhauls. Ability to work with aircraft maintenance manuals and electronic documentation. Education and Experience RequirementsHigh School Diploma or GED...