![Amentum](https://media.trabajo.org/img/noimg.jpg)
Aircraft Mechanic II
2 months ago
The Aircraft Mechanic II (Quality Control Inspector) inspects the repair and modification of aircraft structures, structural components, and engines of complex to extreme difficulty.
- Plans, conducts, and supervises aircraft technical inspections.
- Inspects and evaluates repairs and modifications to aircraft structures, structural components and engines.
- Inspects and evaluates maintenance of aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components.
- Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions.
- Applies technical expertise in restoring equipment condition and operation.
- Participates in maintenance test flights and operation checks as required.
- Ensures compliance with aircraft configuration control, oil analysis Program and test measuring diagnostic equipment calibration.
- Provides lower-level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards and operational policies.
- Contributes input to development and implementation of quality control and ground safety programs to ensure compliance with contract specifications.
- Inspects and verifies proper completion and documentation of safety and flight discrepancies.
- Must be able to lead small groups independently and provide oversight updates to the program leadership.
- Perform other qualified duties as required.
Minimum Requirements:
- Must have five years of recent applicable aircraft maintenance experience.
- Must have at least one year experience inspecting MDS aircraft assigned.
- Must possess a Federal Aviation Administration (FAA) Airframe and Powerplant License (A&P). If no A&P, shall have a minimum of five years’ experience as an aircraft inspector on the Mission Design Series (MDS) airframe they will be inspecting.
- Must hold a valid (current) FAA Inspection Authorization (IA). If no IA, shall have a minimum of five years’ experience as an aircraft inspector on the Mission Design Series (MDS) airframe they will be inspecting.
- Must have satisfactorily completed the 15-series career management field Advanced Leadership Course (formerly BNCOC), AMOC, or possess a Federal aviation Administration (FAA) Airframe and Powerplant License (A&P).
- Must have Security Clearance appropriate to the level required for the work.
- Broad working knowledge of aircraft maintenance, inspection techniques, FAA regulations, and technical publications.
- Working knowledge of aircraft safety requirements and how to operate portable firefighting equipment.
- Ability to read, interpret, and comprehend schematic diagrams, drawings, charts, and technical publications.
- Exceptional communication skills, leadership abilities, and personnel management skills are required.
- Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc.
- Able to prioritize workload to maintain schedules on assigned projects.
- Basic computer data entry skills required for use of maintenance and logistics databases.
- Ability to communicate effectively, both verbally and in writing.
- If assigned to flight duty, shall possess a current, valid ARMY or FAA Third Class Medical Certificate and meet the qualifications in AR 95-20.
- Must meet qualifications for performing UH-60 /AH-64/CH-47 Weight & Balance entries.
- MWO - Travel as needed
- High School Diploma or Equivalent required.
Clearance Requirements:
- Must be able to obtain and maintain a NACI(T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility.
Preferred/Physical Qualifications:
- Frequently lifts parts and equipment up to 25 pounds.
- Occasionally lifts objects up to 50 pounds.
- Most heavy lifting is accomplished through the use of mechanical devices.
- Work is performed in Aircraft maintenance hangar that is moderately lighted, heated, and ventilated. Work could be performed outside as well.
- May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.
- While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and talk or hear.
- The employee frequently is required to walk; reach with hands and arms; and stoop, kneel, crouch, or crawl and work in tiring and uncomfortable positions.
- The employee is occasionally required to sit, climb, or balance.
- May be exposed to extreme noise from turbine and jet engine aircraft.
- May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.
- Knowledge of military and/or company forms required by work specifications is a plus.
- May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.
- Will handle dirty parts and lubricants.
- May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.
Labor Law Posters
EEO including Disability/Protected Veterans
-
Aircraft Mechanic II
1 month ago
Ft Wainwright, United States Amentum Full timeThe Aircraft Mechanic II maintains repairs and modifies aircraft structures and structural components of moderate difficulty. Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Remove and install aircraft subsystem assemblies and components such as...
-
Aircraft "Avionics" Mechanic AM-I
3 weeks ago
Ft Wainwright, United States Amentum Full timeThe UH-60, AH-64, CH-47 Aircraft "Avionics" Mechanic AM-I (Avionics MWO) adjusts, repairs and/or replaces electrical wiring and aircraft system avionics. Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Three (3) years aviation maintenance...
-
Ft Wainwright, United States Amentum Full timeThe UH-60, AH-64, CH-47 Aircraft Mechanic AM-I (Avionics MWO) adjusts, repairs and/or replaces electrical wiring and aircraft system avionics. Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Three (3) years aviation maintenance experience, two...
-
Aircraft "Avionics" Mechanic AM-I
1 month ago
Ft Wainwright, United States Amentum Full timeThe UH-60, AH-64, CH-47 Aircraft "Avionics" Mechanic AM-I (Avionics MWO) adjusts, repairs and/or replaces electrical wiring and aircraft system avionics. Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Three (3) years aviation maintenance...
-
Ft Wainwright, United States Amentum Full timeThe UH-60, AH-64, CH-47â Aircraft Mechanic AM-I (Avionics MWO) adjusts, repairs and/or replaces electrical wiring and aircraft system avionics. Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Three (3) years aviation maintenance...
-
Aircraft Mechanic I
2 weeks ago
Ft Wainwright, United States Amentum Full timeThe Aircraft Mechanic I (Sheetmetal/Structural Specialty) troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. Repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components...
-
Aircraft Mechanic I
2 months ago
Ft Wainwright, United States Amentum Full timeThe Aircraft Mechanic I (Sheetmetal/Structural Specialty) troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. Repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components...
-
Aircraft Maintenance Technician Citation X
1 month ago
Ft Worth, TX, US Executive Jet Management Full timeTitle: Aircraft Maintenance Technician Citation X Company: Executive Jet Management Area of Interest: Aircraft Maintenance Location: Ft Worth, TX, US Req ID: 13714 About EJM EJM has been a...
-
Heavy Equipment Mechanic
1 month ago
Ft Cavazos, United States ManTech Full timeSecure our Nation, Ignite your FutureBecome an integral part of a diverse team while working at an Industry Leading Organization, where our employees come first. At ManTech International Corporation, you'll help protect our national security while working on innovative projects that offer opportunities for advancement.Currently, ManTech is seeking a...
-
Data Center Operations Technician I
2 months ago
Ft Lauderdale, United States Flexential Full timeJob Description:The Data Center Operations Technician I is a 24x7x365, market-based position responsible for providing physical and Level II technical support to Flexential customers and resources. A solid understanding of Facilities infrastructure, Windows operating systems, PC troubleshooting and management applications. Data Center Operations Technician...
-
Data Center Operations Technician I
3 months ago
Ft Lauderdale, FL, United States Flexential Full timeJob Description:The Data Center Operations Technician I is a 24x7x365, market-based position responsible for providing physical and Level II technical support to Flexential customers and resources. A solid understanding of Facilities infrastructure, Windows operating systems, PC troubleshooting and management applications. Data Center Operations Technician...
-
Data Center Operations Technician I
3 months ago
Ft Lauderdale, FL, United States Flexential Full timeJob Description:The Data Center Operations Technician I is a 24x7x365, market-based position responsible for providing physical and Level II technical support to Flexential customers and resources. A solid understanding of Facilities infrastructure, Windows operating systems, PC troubleshooting and management applications. Data Center Operations Technician...