Material Handling Equipment Technician I

~​$5000 Sign-On Bonus JOB SUMMARY This is an Operations position responsible for assisting Material Handling Equipment (MHE) technician II & III with maintenance activities associated with material handling equipment, and maintenance of industrial batteries. RESPONSIBILITIES
~ Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements
~ Learn/gain knowledge of controls and electric (AC - Alternative Current & DC - Direct Current) low voltage.
~ Learn/complete small electrical repairs and welding projects as needed.
~ Learn to perform and maintain power material handling equipment (MHE) including preventive maintenance (PM) of MHE fleet checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, PM per manufacturers recommendations
~ Learn/gain knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC (distribution center) systems, drive motors, power amps, electrical controls including PLC systems
~ Learn/gain knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanisms, steering systems, suspension systems
~ Completes all special projects associated with buildings or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices
~ Battery Maintenance duties will include battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries
~ Participate in departmental on-call program, as designated
~ Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc.
~ Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis.
~ Maintain all tools and equipment in clean, safe, working order
~ Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job
~ Respond to emergency situations to ensure employee and facility safety
~ Champion overall safety in the department
~ Comply with OSHA, and other local, state and federal regulations
~ Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance
~ Interact effectively, build relationships, and demonstrate a high level of cooperation


QUALIFICATIONS
Education
High School diploma or general education degree (GED);
Tech school or equivalent is preferred (2 years)

Experience
~ Two years in an MHE maintenance position preferred (No experience required)


Professional Skills
Ability to read, analyze and interpret technical procedures, or governmental regulations
Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals

Certificates, Licenses, and Registrations
Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards.
Complete a Sysco approved the defensive driving program
Obtain a Powered Industrial Equipment Certification from Sysco within 3 months
MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) preferred

Physical Demands
While performing the duties of this job, the associate is regularly required to talk or hear.
The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance.
The associate is occasionally required to stoop, kneel, crouch, or crawl.
The associate must occasionally lift and/or move up to 100 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Working Conditions
While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces.
The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call.
The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.).
The associate is occasionally exposed to high, precarious places and confined spaces.
The associate is occasionally exposed to fumes or airborne particles.
The noise level in the work environment is usually moderate.

External Job Posting External Job Posting Format     JOB SUMMARY This is an Operations position responsible for assisting Material Handling Equipment (MHE) technician II & III with maintenance activities associated with material handling equipment, and maintenance of industrial batteries. RESPONSIBILITIES
Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements
Learn/gain knowledge of controls and electric (AC - Alternative Current & DC - Direct Current) low voltage.
Learn/complete small electrical repairs and welding projects as needed.
Learn to perform and maintain power material handling equipment (MHE) including preventive maintenance (PM) of MHE fleet checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, PM per manufacturers recommendations
Learn/gain knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC (distribution center) systems, drive motors, power amps, electrical controls including PLC systems
Learn/gain knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanisms, steering systems, suspension systems
Completes all special projects associated with buildings or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices
Battery Maintenance duties will include battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries
Participate in departmental on-call program, as designated
Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc.
Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis.
Maintain all tools and equipment in clean, safe, working order
Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job
Respond to emergency situations to ensure employee and facility safety
Champion overall safety in the department
Comply with OSHA, and other local, state and federal regulations
Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance
Interact effectively, build relationships, and demonstrate a high level of cooperation

QUALIFICATIONS
Education
High School diploma or general education degree (GED);
Tech school or equivalent is preferred (2 years)

Experience
~ Two years in an MHE maintenance position preferred (No experience required)


Professional Skills
Ability to read, analyze and interpret technical procedures, or governmental regulations
Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals

Certificates, Licenses, and Registrations
Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards.
Complete a Sysco approved the defensive driving program
Obtain a Powered Industrial Equipment Certification from Sysco within 3 months
MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) preferred

Physical Demands
While performing the duties of this job, the associate is regularly required to talk or hear.
The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance.
The associate is occasionally required to stoop, kneel, crouch, or crawl.
The associate must occasionally lift and/or move up to 100 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Working Conditions
While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces.
The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call.
The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.).
The associate is occasionally exposed to high, precarious places and confined spaces.
The associate is occasionally exposed to fumes or airborne particles.
The noise level in the work environment is usually moderate.


Characteristics
~ Critical Job Critical Job

Compensation
~ Compensation Grade Compensation Grade
~206

~ Impacted Eligibility Rules Impacted Eligibility Rules (empty)

Unions
~ Union Membership Union Membership select one

Job Exempt
Worker's Compensation Codes
Certifications
Competencies
Education
Languages
Responsibilities
Skills
Training
Work Experience
Equivalence Rule
Job Exempt 1 item
* Country / Country Region
Job Exempt
Add Row Country / Country Region Job Exempt
~ United States of America

More
OK
Cancel
Internal Job Posting
Normal     JOB SUMMARY

This is an Operations position responsible for assisting Material Handling Equipment (MHE) technician II & III with maintenance activities associated with material handling equipment, and maintenance of industrial batteries.

RESPONSIBILITIES
Demonstrate an understanding and adherence to all work safety policies, procedures, and governing requirements
Learn/gain knowledge of controls and electric (AC - Alternative Current & DC - Direct Current) low voltage.
Learn/complete small electrical repairs and welding projects as needed.
Learn to perform and maintain power material handling equipment (MHE) including preventive maintenance (PM) of MHE fleet checking, draining and filling oil levels as needed, checking, adjusting, or replacing all belts and chains as needed, checking and troubleshooting electrical controls issues, replacing motors and controls, safety checks, PM per manufacturers recommendations
Learn/gain knowledge of hydraulic systems/schematics/components, electrical systems/schematics both AC and DC (distribution center) systems, drive motors, power amps, electrical controls including PLC systems
Learn/gain knowledge of mechanical systems including transmissions, drive units, differentials, braking systems, telescopic masts, reach mechanisms, steering systems, suspension systems
Completes all special projects associated with buildings or grounds, as requested. Includes but not limited to moving furniture or fixtures, changing lights, light carpentry, painting, light plumbing, changing of light bulbs, repair of minor electrical devices
Battery Maintenance duties will include battery charger repairs, battery changes for MHE, repair of plugs and tips of batteries and chargers, watering and washing batteries, acid spill clean up, battery rack cleaning, battery area sweeping and cleaning, setting equalizing charge on batteries
Participate in departmental on-call program, as designated
Responsible for logging time and materials into the computerized maintenance management system (CMMS) on a daily basis in the form of work orders, P.M.s, etc.
Responsible for housekeeping, clean up of all maintenance areas/work areas on a daily basis.
Maintain all tools and equipment in clean, safe, working order
Adhere to all safety requirements and wear the proper Personal Protective Equipment required by the job
Respond to emergency situations to ensure employee and facility safety
Champion overall safety in the department
Comply with OSHA, and other local, state and federal regulations
Adhere to Organization and the Facilities Department policies and procedures including appropriate attire, grooming, and attendance
Interact effectively, build relationships, and demonstrate a high level of cooperation

QUALIFICATIONS
Education
High School diploma or general education degree (GED);
Tech school or equivalent is preferred (2 years)

Experience
~ Two years in an MHE maintenance position preferred (No experience required)


Professional Skills
Ability to read, analyze and interpret technical procedures, or governmental regulations
Ability to add, subtracts, multiply, and divides into all units of measure, using whole numbers, common fractions, and decimals

Certificates, Licenses, and Registrations
Must possess a valid state Driver's License and provide proof of liability coverage meeting Company standards.
Complete a Sysco approved the defensive driving program
Obtain a Powered Industrial Equipment Certification from Sysco within 3 months
MHE 8 hour maintenance tech certificate from MHE manufacturer (IE: Crown, Raymond, Hyster, etc.) preferred

Physical Demands
While performing the duties of this job, the associate is regularly required to talk or hear.
The associate is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms and climb or balance.
The associate is occasionally required to stoop, kneel, crouch, or crawl.
The associate must occasionally lift and/or move up to 100 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Working Conditions
While performing the duties of this job, the associate is occasionally exposed to wet, hot, extreme cold and/or humid conditions; and moving mechanical parts and may be required to work in confined spaces.
The associate works non-traditional business hours including evenings, nights, weekends, holidays and on-call.
The associate may occasionally be required to travel to other Operating Companies or the corporate office as business needs dictate (i.e. training, business continuation, etc.).
The associate is occasionally exposed to high, precarious places and confined spaces.
The associate is occasionally exposed to fumes or airborne particles.
The noise level in the work environment is usually moderate.

Done