Engineer II

7 hours ago

Houston, United States EHRA Engineering Full time
Description

The Engineer II & Engineer III positions demonstrate intermediate knowledge of the concepts, practices and procedures for Municipal Utility Districts that include water distribution lines, wastewater collection lines, storm sewer collection systems, paving, grading, drainage, and other related items. Candidates will work under general supervision with limited responsibility over interns and Engineer I's in a particular field of specialization; perform intermediate tasks in defined skill areas/applications by continuously building on current job knowledge; maintain effective relationships with clients, peers, vendors, and others in a diverse environment; support team decisions and follow through with team responsibilities; interpret information, ideas and instructions and communicate clearly and accurately both verbally and in writing including materials intended for distribution; determine causes of unusual occurrences and apply standard principles and practices to determine and implement solutions; ensure safe practices and environmental awareness are exhibited in decisions; typically work under general supervision, while performing assignments that are varied and that may be somewhat difficult in character, but usually involve limited responsibility.

Typical Duties and Responsibilities:
  • Prepare Engineering Reports and attend Municipal Utility District meetings.
  • Assist in the preparation of Bond Application Reports.
  • Preparation of water and sewer rehabilitation plans as well as Capital Improvement Schedules (CIP).
  • Investigate and evaluate practical applicability of theories and engineering principles basic to the development and improvement of various engineering systems; solve complex and detailed problems.
  • Conduct investigations and assist in development of new concepts to solve unique problems.
  • Write technical reports, documents, designs and produce oral/written presentations based on the results of investigations and surveys.
  • Perform tasks of a larger scope and lead specific tasks within the project scope.
  • Interact in a collaborative manner with other team members, staff, and clients to accomplish organizational goals; may provide ideas to improve efficiency at group level; network within and beyond own technical peer group.
  • Supervise the work of Engineer I's, designers and interns.
  • Perform engineering design functions under the direction of a Registered Professional Engineer.
  • Participate on a design team in the preparation of design documents and cost estimates in varying stages for minor to standard engineering designs.
  • Lead development of in-house designs for projects of moderate scope.
  • Assist in the oversight of the construction of such projects.
  • Assist in preparation of project scope of work; assist in preparation of and maintaining design of construction schedules and budgets
  • Provide support throughout the project and provide status updates throughout project life
  • Serve on committees as needed and monitor the professional development of designers.
  • Provide professional consultation to company personnel requiring engineering advice or direction.
  • Assist with analysis and evaluation of products for company use.
  • Provide input into the development and documentation of specific company design standards for use by all professionals working on company design projects.
Knowledge, skills and abilities:
  • Engineering and Technology - Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, software and equipment to the design and production of company services.
  • Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
  • Complex Problem Solving - Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions.
  • Dependability - Job requires being reliable, responsible, and dependable, and fulfilling obligations.
  • Attention to Detail - Job requires being careful and thorough about detail in completing work tasks.
  • Analytical Thinking - Job requires analyzing information and using logic to address and formulate alternative solutions to work-related issues and problems.
Work Environment:
  • This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines.
  • The performance of this position may occasionally require exposure to the construction areas, which may require the use of personal protective equipment such as safety glasses with side shields and mandatory hearing protection, etc.
Education, certification and experience:
  • 2+ years related experience.
  • Bachelor's Degree (or higher) in Engineering or related discipline or an equivalent combination of education and experience.
  • Required Certifications, Registrations or Licensure: EIT Certification; PE license preferred.
  • Valid TX Driver's License and ability to operate a motor vehicle may be requested.
Physical Requirements:

The physical demands described here are representative of those that must be met by an employee to successfully perform the functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • This is largely a sedentary role. While performing the duties of this job, the employee is regularly required to communicate both orally and in writing.
  • The employee is occasionally required to move about the office to utilize office productivity machinery as well as maneuver through construction sites safely.
  • May require the ability to position his or herself to lift files, open filing cabinets and bend or stand on a stool as necessary.
  • The employee may be required to lift and/or move up to 10 pounds.
  • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.


The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • Engineer II

    7 days ago

    Houston, United States BrandSafway Full time

    Engineer II Summary Title: Engineer II ID: 2090634 Location: Houston, TX Job Function : Engineering Description A leading provider of specialized services to the global industrial, commercial and infrastructure markets, BrandSafway delivers access and scaffolding systems, forming and shoring, industrial services and related solutions to more than...

  • Engineer II

    7 days ago

    Houston, United States Alcon Full time

    At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you'll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients...

  • Engineer I/II/III/Sr.

    1 week ago

    Houston, United States Boardwalk Pipeline Full time

    Engineer I/II/III/Sr. Houston, TX, USA Req #1359 Wednesday, November 13, 2024 *To access Dayforce at its best, log in from the latest version of Chrome, Safari, Firefox, or Edge. * Boardwalk is a limited partnership operating in the midstream portion of the natural gas and natural gas liquids industry, providing transportation and storage services for...

  • Process Engineer II

    6 months ago

    Houston, United States Technip Energies Full time

    About Technip Energies With approximately 15,000 employees, Technip Energies is one of the largest engineering and technology companies globally, with leadership positions in LNG, hydrogen and ethylene as well as growing market positions in sustainable chemistry and CO2 management. If you share our clear vision to drive the transition to a low-carbon...

  • AI Engineer II

    7 days ago

    Houston, United States INSPYR Solutions Full time

    Title: AI Engineer II Location: Houston, TX 77002 (ONSITE) Duration: Long Term Contract Work Requirements: US Citizen, GC Holders or Authorized to Work in the U.S. JOB DESCRIPTION: We are currently seeking an experienced AI Engineer to join the Big Data Services department on a contract basis. As part of the Data Science team, the AI Engineer will work...

  • AI Engineer II

    1 week ago

    Houston, United States INSPYR Solutions Full time

    Title: AI Engineer II Location: Houston, TX 77002 (ONSITE) Duration: Long Term Contract Work Requirements: US Citizen, GC Holders or Authorized to Work in the U.S. JOB DESCRIPTION: We are currently seeking an experienced AI Engineer to join the Big Data Services department on a contract basis. As part of the Data Science team, the AI Engineer will work...

  • Site Engineer II

    6 hours ago

    Houston, United States Digital Realty Full time

    Job DescriptionYour role The Site Engineer II position is a contributing member to the site level Data Center Operations team assigned to one or more of our data center properties reporting directly to the Manager Engineering Operations. The Site Engineer II will have experience in mission critical infrastructure, including Generators, UPS Systems, HVAC...

  • Injection Molding Process Engineer II

    1 month ago

    Houston, United States The Judge Group Full time

    Job Title: Injection Molding Process Engineer Ii Location : Houston TXJob DescriptionDevelop and sustain optimum molding process for medical manufacturing device componentsDevelop injection molding process per the decouple scientific principles.Run Projects from start to finish.Improve and troubleshoot areas in the molding department. Validation IQ/OQ/PQ,...

  • Injection Molding Process Engineer II

    3 weeks ago

    Houston, United States Sunrise Systems, Inc. Full time

    Job Title: Injection Molding Process Engineer II Job Id: 24-05242 Location: Houston, TX Duration: 24 Months On W2 Contract Develop and sustain optimum molding process for medical manufacturing device components Develop injection molding process per the decouple scientific principles. Run Projects from start to finish. ...

  • Manufacturing Planner II Position

    5 days ago

    Houston, Texas, United States Raytheon Full time

    About the RoleThe Test Manufacturing group within The Test Equipment Engineering directorate is seeking a Manufacturing Planner II to manage and lead the acquisition and manufacturing of Test Equipment.This position includes generating and monitoring the progression of multiple requisitions through the procurement cycle, facilitating resolution of...

  • Staff Civil

    1 week ago

    Houston, United States Roux Associates Full time

    Job Title Staff Civil / Environmental Engineer II Job Type Regular Full Time Education Bachelor's Degree Category Engineering Job Description Position Overview This position will assist the project team on civil/environmental engineering design, investigation/remediation, and other projects. Position Requirements Bachelor's degree in civil or environmental...

  • Engineer I/II/III/Sr.

    10 hours ago

    Houston, United States Boardwalk Pipelines Full time

    *To access Dayforce at its best, log in from the latest version of Chrome, Safari, Firefox, or Edge. * Boardwalk is a limited partnership operating in the midstream portion of the natural gas and natural gas liquids industry, providing transportation and storage services for our customers. Our 14,000 miles of pipeline and storage assets provide diverse...

  • Injection Molding Process Engineer II TX

    3 weeks ago

    Houston, United States Talentburst Full time

    Job title: Injection Molding Process Engineer II Read on to find out what you will need to succeed in this position, including skills, qualifications, and experience. Location: Houston, TX (Onsite) Duration: 24 months Interviews: 2 Start date: ASAP Job Description Develop and sustain optimum molding process for medical manufacturing device...

  • Injection Molding Process Engineer II TX

    3 weeks ago

    houston, United States TalentBurst Full time

    Job title: Injection Molding Process Engineer II Location: Houston, TX (Onsite) Duration: 24 months Interviews: 2 Start date: ASAP Job Description Develop and sustain optimum molding process for medical manufacturing device components Develop injection molding process per the decouple scientific principles. Run Projects from start to...

  • Senior R&D Engineer II

    2 months ago

    Houston, United States Powell Industries Full time

    Powell Industries, a US manufacturer of low- and medium-voltage electrical equipment for commercial, industrial, and utility systems is seeking highly motivated candidates for a Senior R&D Engineer II as part of an expansion of New Product Development in our Research and Development Department. In this role, you will work with a team of experienced...

  • Senior R&D Engineer II

    4 days ago

    Houston, United States Powell Industries Full time

    Powell Industries, a US manufacturer of low- and medium-voltage electrical equipment for commercial, industrial, and utility systems is seeking highly motivated candidates for a Senior R&D Engineer II as part of an expansion of New Product Development in our Research and Development Department. In this role, you will work with a team of experienced...

  • Sr. Engineer II

    1 week ago

    Houston, United States Alcon Full time

    At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you'll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients...

  • Electrical Designer II

    1 month ago

    Houston, United States Powell Industries Full time

    The Senior Electrical Designer II is responsible for designing and developing electrical systems for various projects. They work closely with engineers and other team members to create detailed electrical drawings, schematics, and specifications. They also participate in project meetings, provide technical support, and ensure compliance with industry codes...

  • Software Engineer II

    3 days ago

    Houston, United States JPMorganChase Full time

    Job DescriptionJOB DESCRIPTIONYou’re ready to gain the skills and experience needed to grow within your role and advance your career — and we have the perfect software engineering opportunity for you.As a Python Software Engineer II at JPMorgan Chase within the Corporate and Investment Bank, Athena Trade and Risk Services, you are part of an agile team...

  • Designer II TX

    3 weeks ago

    Houston, United States Talentburst Full time

    Designer IIBe one of the first applicants, read the complete overview of the role below, then send your application for consideration. Houston, TX 6+ months with a high possibility of extension Description: The main function of a Civil Designer II is responsible for assisting Engineering and Operations in complying with the Facility Data Management...