Core and Coil Assembler

3 months ago

Waukesha, United States Prolec-GE Waukesha,Inc Full time
Job DescriptionJob Description

JOB SUMMARY

The core and coil assembler role is a heavy mechanical assembly position that focuses on the internal assembly of our core and coils. In this role, an employee will work on functions such as landing coils using an overhead crane, placing top yoke steel by hand, using hydraulic equipment to press coils, and utilizing crimping equipment to connect insulated copper cables. An employee in this role must train, develop skills, and demonstrate proficiency in all of the following work center areas: Coil Landing, Core & Coil Assembly, and Internal Wiring. An employee may also learn additional skills in Booster Assembly and Rack and Cable Assembly.

PRINCIPLE DUTIES AND RESPONSIBILITIES

  • Receive assignments and instructions from supervisor - both verbal and written. Follows drawings, Bill of Materials, and other established manufacturing procedures. Coordinate and communicate with supervision and team leads.
  • Set up core.
  • Land Coils onto a Core (E-Assemble) using a crane.
  • Cut fix and spread core clamps.
  • Set up Pressing equipment and Press unit.
  • Lock in unit.
  • Take pressing equipment off of the unit and Top Yoke.
  • Perform work in other departments as needed.
  • Have the ability to look up unit non-conformances electronically.
  • Pull-in and complete Core & Coil Assembly for pre-lead ratio/inspection.
  • May work in Med Power, Large Power or Extra High Voltage product lines.
  • Assemble pressboard cylinders, end pack out, foot bars and phase barriers.
  • Crimp & insulate connections.
  • Assemble and wire the reactor.
  • Build and assemble Booster Unit complete (set up core/e-assembly through wiring) as needed.
  • Assemble Cleat & Leads Assemblies to unit (HV, LV, Top racks).
  • Resistance Braze Coil Conductor Leads & Cleat & Lead connections as required.
  • Braze sub-assemblies (bus bars, external assemblies, etc.) as required.
  • Layout and assemble Wood and Cable (Cleat and Lead) Racks for mains and boosters.
  • Assemble de-energized tap changer switches to wood racks.
  • Stack shunt steel for both the top and bottom of the internal assembly
  • Make minor repairs and machine maintenance. Write work orders for the repair of tooling and equipment.
  • Complete specific contamination control and cleanliness maintenance procedures such as vacuuming, performing magnetic seeps, and cleaning other items.
  • Complete 5S training and keep tools, equipment and work areas clean and orderly.
  • Follows all safety procedures and policies of company.
  • Will, as required, perform repair work on oiled component inside and outside of the tank.
  • Assist in training of new operators.

KNOWLEDGE, SKILLS & ABILITIES

Knowledge of brazing equipment, wire and cable cutters, grinders, disc sander, band saw, portable scaffolding and ladders, hydraulic crimpers, hydraulic jacks, pressing equipment, air pallets, chains, hooks, clamps, coil lifting spiders, overhead and jib crane, table saw, shears, various hand tools and others.

Materials used in this position include wood, cotton and crepe tape, connectors, metal and fiber bolts, and threaded stock, paper and fiber tubes, cable, buss bars, glue, pressboard, switch gear, silver solder, cleat and lead assemblies, assorted conductors of various size, top yoke, core assembly, windings, wood supports, spacer rings, insulating material, wood blocks and others.

Precision work and care required preventing major damage to components or unit. Operators work at heights up to approximately 18 feet. Top Yoke operation presents additional hazards because of sharp edges on steel. Assembly operations require mental and visual concentration to ensure compliance with engineering and quality specifications. S/he must be able to work in confined spaces, including working inside tanks.


EDUCATION AND EXPERIENCE

Required Education / Experience

High School Diploma or equivalent


CONTEXT

Reports To:

Production Supervisor

Number of Staff:

0

Department:

Core and Coil Assembly

Pay Grade

L15

Location

Waukesha

FLSA Status:

Non-Exempt

ADDITIONAL INFORMATION

Key Working Relationships

  • Plant Supervision, Quality, Planning, etc.
  • Engineering Organization, including mechanical, electrical and manufacturing engineering groups

Physical Demands

Must be able to stand for extended periods of time. Must be able to frequently walk and stand. Must occasionally be able to climb, balance, push, pull, carry and sit. Will minimally work below waist level.

Working Conditions

Shop-floor located on large manufacturing plant.

Prolec-GE Waukesha, Inc. is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, genetic information, disability, protected veteran status, or any other reason prohibited by applicable law.

  • Core and Coil Assembler

    1 week ago

    Waukesha, Wisconsin, United States Prolec Energy Full time

    Job SummaryThe Core and Coil Assembler role is a critical mechanical assembly position that focuses on the internal assembly of our core and coils. In this role, an employee will work on functions such as landing coils using an overhead crane, placing top yoke steel by hand, using hydraulic equipment to press coils, and utilizing crimping equipment to...

  • Core and Coil Assembler

    6 days ago

    Waukesha, Wisconsin, United States Argus Technical Services Full time

    Job SummaryWe are seeking a skilled Core and Coil Assembler to join our team at Argus Technical Services. As a key member of our manufacturing team, you will be responsible for assembling and testing electrical equipment, including cores and coils.Key ResponsibilitiesAssemble and test electrical equipment, including cores and coils, to ensure compliance with...

  • Core and Coil Assembler

    7 days ago

    Waukesha, Wisconsin, United States Argus Technical Services Full time

    Job SummaryWe are seeking a skilled Core and Coil Assembler to join our team at Argus Technical Services. As a key member of our manufacturing team, you will be responsible for assembling and testing electrical equipment, ensuring high-quality products that meet our customers' needs.Key ResponsibilitiesAssemble and test electrical equipment, including cores,...

  • Core and Coil Assembler

    2 weeks ago

    Waukesha, Wisconsin, United States Argus Technical Services Full time

    Job SummaryArgus Technical Services is seeking a skilled Core and Coil Assembler to join our team. As a key member of our manufacturing department, you will be responsible for assembling and testing electrical equipment, ensuring high-quality products that meet our customers' needs.Key ResponsibilitiesAssemble and test electrical equipment, including cores,...

  • Core and Coil Assembler

    2 months ago

    Waukesha, United States Prolec-GE Waukesha,Inc Full time

    Job DescriptionJob DescriptionJOB SUMMARYThe core and coil assembler role is a heavy mechanical assembly position that focuses on the internal assembly of our core and coils. In this role, an employee will work on functions such as landing coils using an overhead crane, placing top yoke steel by hand, using hydraulic equipment to press coils, and utilizing...

  • Core and Coil Assembler

    2 weeks ago

    Waukesha, United States Prolec-GE Waukesha,Inc Full time

    Job DescriptionJob DescriptionJOB SUMMARYThe core and coil assembler role is a heavy mechanical assembly position that focuses on the internal assembly of our core and coils. In this role, an employee will work on functions such as landing coils using an overhead crane, placing top yoke steel by hand, using hydraulic equipment to press coils, and utilizing...

  • Core and Coil Production Specialist

    3 weeks ago

    Waukesha, Wisconsin, United States Argus Technical Services Full time

    PRIMARY RESPONSIBILITIES Receive tasks and directives from the supervisor, both verbally and in writing. Adhere to schematics, Bills of Materials, and established manufacturing protocols. Collaborate and communicate effectively with management and team leaders.Prepare core components.Position coils onto a core (E-Assembly) utilizing a crane.Cut, secure, and...

  • Core and Coil Production Specialist

    3 weeks ago

    Waukesha, Wisconsin, United States Argus Technical Services Full time

    PRIMARY RESPONSIBILITIES Receive tasks and directives from management, both verbally and in writing. Adhere to schematics, Bills of Materials, and established manufacturing protocols. Collaborate and communicate effectively with supervisors and team leaders.Prepare core components.Position coils onto a core (E-Assembly) utilizing a crane.Cut, secure, and...

  • Core and Coil Attendant

    4 weeks ago

    Waukesha, United States Prolec-GE Waukesha,Inc Full time

    Job DescriptionJob DescriptionJOB SUMMARYThis position will attend to and assist Core and Coil Assembly associates on a regular basis in all of the following work center areas: E- Assembly, Core & Coil Assembly, Booster Assembly, Cleat and Leads, and Internal Wiring. PRINCIPLE DUTIES AND RESPONSIBILITIESLearn the tooling and equipment used in the department,...

  • Coil Winder Specialist

    3 weeks ago

    Waukesha, Wisconsin, United States Prolec-GE Waukesha,Inc Full time

    Job SummaryThe Coil Winder role is a critical assembly position that focuses on the assembly of our coil windings. In this position, you will train to set up and wind medium and large power 1 and 2 wire disc windings, multiple disc windings from 1 to 16 wires, and screw and RV windings.Key ResponsibilitiesReceive assignments and instructions from supervisors...

  • Coil Winder Specialist

    3 weeks ago

    Waukesha, Wisconsin, United States Prolec-GE Waukesha,Inc Full time

    Job SummaryProlec-GE Waukesha, Inc. is seeking a skilled Coil Winder Specialist to join our team in a heavy assembly position. The successful candidate will be responsible for setting up and winding medium and large power 1 and 2 wire disc windings, multiple disc windings from 1 to 16 wires, and screw and RV windings.Key ResponsibilitiesReceive assignments...

  • Assemble Transformers

    9 hours ago

    Waukesha, Wisconsin, United States Eaton Full time

    Job SummaryEaton is seeking a skilled Assembler (Stacking)-1st Shift to join our team in Waukesha, WI. As a key member of our production team, you will be responsible for assembling coils, steel cores, and clamps to initiate the building process for Transformers.Key ResponsibilitiesAssemble coils, steel cores, and clamps to initiate the building process for...

  • Coil Winding Specialist

    2 weeks ago

    Waukesha, Wisconsin, United States Eaton Manufacturing Full time

    Job SummaryEaton Manufacturing is seeking a skilled Coil Winding Machine Operator Apprentice to join our team. As a Coil Winding Machine Operator Apprentice, you will be responsible for setting up and operating winding machines to produce coils of various sizes to specifications.Key ResponsibilitiesRead and Interpret Winding Specifications: Read and...

  • Coil Winder

    1 month ago

    Waukesha, United States Eaton Manufacturing Full time

    Job DescriptionJob DescriptionThe Coil Winder Machine Operator Apprentice will set-up and operate winding machines to produce coils of various size to specifications called for on winding sheets, winding diagrams, and order pouches. Coil conductor configurations include strip, round, and rectangular wire, in various combinations. The training apprenticeship...

  • Coil Winding Machine Operator Apprentice

    2 weeks ago

    Waukesha, Wisconsin, United States Eaton Manufacturing Full time

    Job SummaryEaton Manufacturing is seeking a skilled Coil Winding Machine Operator Apprentice to join our team. As a Coil Winding Machine Operator Apprentice, you will be responsible for setting up and operating winding machines to produce coils of various sizes to specifications.Key ResponsibilitiesRead and Interpret Winding Specifications: Read and...

  • Coil Winder Screw/RV

    3 weeks ago

    Waukesha, United States Prolec Energy Full time

    JOB SUMMARY The Coil Winder role is a heavy assembly position that focuses on the assembly of our coil windings. In this position you would train to set up and wind medium and large power 1 and 2 wire disc windings, multiple disc windings from 1 to 16 wires, and screw and RV windings. PRINCIPLE DUTIES AND RESPONSIBILITIESReceive assignments and instructions...

  • Coil Winder Screw/RV

    3 weeks ago

    Waukesha, United States Prolec-GE Waukesha, Inc Full time

    JOB SUMMARY The Coil Winder role is a heavy assembly position that focuses on the assembly of our coil windings. In this position you would train to set up and wind medium and large power 1 and 2 wire disc windings, multiple disc windings from 1 to 16 wires, and screw and RV windings. PRINCIPLE DUTIES AND RESPONSIBILITIES Receive assignments and...

  • Coil Winder Screw/RV

    2 months ago

    Waukesha, United States Prolec-GE Waukesha,Inc Full time

    Job DescriptionJob DescriptionJOB SUMMARY The Coil Winder role is a heavy assembly position that focuses on the assembly of our coil windings. In this position you would train to set up and wind medium and large power 1 and 2 wire disc windings, multiple disc windings from 1 to 16 wires, and screw and RV windings. PRINCIPLE DUTIES AND RESPONSIBILITIESReceive...

  • Machine Operator Apprentice

    2 weeks ago

    Waukesha, United States Eaton Manufacturing Full time

    Job DescriptionJob DescriptionThe Coil Winder Machine Operator Apprentice will set-up and operate winding machines to produce coils of various size to specifications called for on winding sheets, winding diagrams, and order pouches. Coil conductor configurations include strip, round, and rectangular wire, in various combinations. The training apprenticeship...

  • Machine Operator Apprentice

    2 weeks ago

    Waukesha, United States Eaton Manufacturing Full time

    Job DescriptionJob DescriptionThe Coil Winder Machine Operator Apprentice will set-up and operate winding machines to produce coils of various size to specifications called for on winding sheets, winding diagrams, and order pouches. Coil conductor configurations include strip, round, and rectangular wire, in various combinations. The training apprenticeship...